Fein BOS 16 Guida all'installazione

BOS 16; BOS 16-2

Repair instructions

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 55

BOS 16; BOS 16-2

Contents

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 2of 55

1. Models described

2. Technical data

3. Notes and requirements

4. Tools required

5. Lubricants and auxiliary substances required

6. Disassembly

7. Assembly

8. Troubleshooting

9. Connection diagram

BOS 16; BOS 16-2

1. Models described

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 3of 55

These instructions describe how to repair the following models:

Model Order number

BOS 16 7 205 47 00 23 0

BOS 16-2 7 205 49 00 23 0

BOS 16; BOS 16-2

2. Technical data

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 4of 55

Technical data

The complete technical data can be found in the operating instructions for the model.

Test data

Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).

Lubricants

The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service → Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

BOS 16; BOS 16-2

3. Notes and requirements

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 5of 55

Note

These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and

electrical training.

Only use original FEIN spare parts!

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in

serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employers' liability insurance associations are to be observed when

commissioning.

The German Equipment and Product Safety Act applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed!

BOS 16; BOS 16-2

4. Tools required

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 6of 55

Standard tools

Special tools

Torx T15; T20 Drawing-off socket cap 6 41 04 150 00 8

Open-ended spanner, size 17 (sanded) 6 29 03 002 00 9 Assembly aid 6 41 22 121 01 0

Socket wrench, 10 mm Chuck cone, 19 mm 6 41 07 019 00 7

Plastic hammer 26 mm chuck cone 6 41 07 026 00 0

Arbor press

Long-nosed pliers

2x slotted screwdriver

Inner puller 10 mm

Slide hammer

Circlip pliers

Sleeve 7 mm inner diameter

Sleeve 17 mm inner diameter

Sleeve 20 mm inner diameter

24 mm outer diameter

Sleeve 22 mm inner diameter

Sleeve 21 mm inner diameter

37 mm outer diameter

BOS 16; BOS 16-2

4. Tools required

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 7of 55

Standard tools

Sleeve 25 mm inner diameter

35 mm outer diameter

Sleeve 38 mm inner diameter

43 mm outer diameter

Ball bearing support 8 mm inner diameter

Ball bearing support 11 mm inner diameter

BOS 16; BOS 16-2

5. Lubricants and auxiliary substances required

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 8of 55

Lubricants

Grease 0 40 11 301 00 5 30 g Gearbox

BOS 16; BOS 16-2

6. Disassembly

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 9of 55

Disassembling handle

1. Unscrew handle (1).

2. Pull off sleeve (2).

3. Remove screw (3).

4. Pull off locking ring (4).

BOS 16; BOS 16-2

6. Disassembly

C-SC_CSSM

Version 1.0

13.11.2013

FEIN retains all rights of disposal, such as copying and circulation

Page 10 of 55

Disassembling quick-clamping drill chuck

1. Unscrew quick-clamping drill chuck (1). Tools:

- Socket wrench, 10 mm

- Open-ended spanner,

size 17 (sanded)

Altri manuali per BOS 16

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fein Trapano

Manuali Trapano popolari di altre marche

Makita

Makita BDF456 Manuale utente

Black & Decker

Black & Decker LDX220 Manuale utente

Hitachi

Hitachi DH 40MA Manuale utente

Challenge

Challenge JO Manuale tecnico di riferimento

Makita

Makita LXFD01 Manuale utente

Festool

Festool T18+3 Manuale utente

Milwaukee

Milwaukee M12 FPDX-202X Manuale utente

EINHELL

EINHELL TE-RH 32 E Manuale utente

Makita

Makita DHP484 Manuale utente

Makita

Makita FD05 Manuale utente

Bosch

Bosch PSB 530 RA Manuale utente

Maximum

Maximum 054-1359-4 Manuale utente

Makita

Makita HP332D Manuale utente

Raider

Raider RDP-HD31H Manuale utente

Bort

Bort BPM-1400x2 Manuale utente

Black & Decker

Black & Decker 7266 Manuale utente

KENT USA

KENT USA TRD1230 Manuale utente

Bosch

Bosch GSB 19-2 RE Manuale utente