FIC FS15 Manuale utente

FS15

MAINBOARD

MANUAL

DOC No.: M00702

Rev. : A1

Date : 3, 2001

Part No. : 25-11566-21

TableofContents

Table of Contents

Chapter 1 Overview

The FS15 Mainboard ..................................................................... 1-2

Package Checklist .......................................................................... 1-2

Main Features ................................................................................ 1-3

ACPI Ready ................................................................................... 1-5

FIC Unique Innovation for Users (NOVUS) -

Enhanced Mainboard Features and System Support ............................... 1-5

Chapter 2 Installation Procedures

Quick Reference (from Page 2-2 to 2-3) .......................................... 2-2

Mainboard Layout .................................................................... 2-2

1). Clear CMOS, Keyboard Power On Enable .................... 2-3

2). Front Panel Block Cable Connection ............................ 2-3

3). CPU Fan Installation .................................................... 2-3

1). Set System Jumpers .................................................................. 2-4

Keyboard Power On Enable: JP2 ....................................... 2-4

Onboard Audio Feature Disable: JP6 ................................ 2-4

Clear CMOS: JP7 ............................................................... 2-5

USB2 Wake Up Enable: JP8 ............................................... 2-5

2). Install RAM Modules ............................................................... 2-6

3). Install the CPU .......................................................................... 2-7

4). Install Expansion Cards ............................................................. 2-8

5). Connect Devices ....................................................................... 2-9

Floppy Diskette Drive Connector ..................................... 2-9

IDE Device Connectors ..................................................... 2-10

Infrared Connector ............................................................ 2-10

ATX Power Connector ...................................................... 2-11

CPU / AGP / Case Fan Connector ..................................... 2-11

System Case Fan Connector: SYS_FAN ........................... 2-12

CD Audio-In Connector .................................................... 2-12

Wake-On-LAN Connector ................................................. 2-12

Front Panel Block Connector: ........................................... 2-13

PS/2 Keyboard and Mouse Connector ............................. 2-14

Universal Serial Bus Connectors ....................................... 2-14

Serial Port Connectors ....................................................... 2-15

Printer Connector .............................................................. 2-15

FS15MainboardManual

Audio I/O Jacks ................................................................ 2-16

Game/MIDI Connector ...................................................... 2-16

Chapter 3 BIOS Setup

CMOS Setup Utility ....................................................................... 3-1

Standard CMOS Setup ................................................................... 3-2

Advanced BIOS Features .............................................................. 3-4

Advanced Chipset Features .......................................................... 3-7

Integrated Peripherals .................................................................... 3-8

Power Management Setup ............................................................. 3-14

PnP/PCI Configurations ................................................................. 3-18

PC Health Status ............................................................................ 3-19

Frequency/Voltage Control ............................................................ 3-20

Load Fail-Safe Defaults .................................................................. 3-21

Load Optimized Defaults ................................................................ 3-21

Supervisor/User Password ............................................................ 3-21

Save and Exit Setup ....................................................................... 3-22

Exit without Saving ........................................................................ 3-22

Quick Reference (Simplified Chinese) |||||||||||||SC-1

1 - 1

Overview

Chapter 1

The new ATX factor form, Socket 370 based, 1stMainboard FS15 supports a

full range of the latest generation Intel Pentium® III/Celeron and VIACyrix

III processors. Intels new Celeron and lightening fast Coppermine proces-

sors of up to 1GHz are supported with Front Side Bus speeds of 66/100/133

MHz. Built using the leading edge 0.18 micron technology the Intel FCPGA

Pentium®III processors provide a significant performance scaling boost over

previous Pentium®III processors.

The Intel 815EP accelerated Hub architecture provides onboard audio pro-

vided by the state of the art embedded codec. Support for the Ultra DMA/100

protocol and its high-speed interface further ensures that data transfer speeds

are improved, especially for long sequential transfers required by audio/visual

applications. This mainboard supports 3 DIMM sockets that allow total 512

MB by using 100/133 MHz 3.3V SDRAM.

The 1stMainboard FS15 comes with a versatile range of I/O features such as 2

serial ports, 1 parallel port, 1 PS/2 mouse and keyboard connector, 2 rear USB

connectors, 1 front USB pin header for 2 USB connectors, 1 media connector

(MIDI /game port, Line-in, Line-out and Mic-in). Ample expansion is available

through 6 PCIs, 1 CNR, and 1 AGP.

Other key features are Remote On/Off, Auto Power Failure Recovery, Key-

board /Mouse Power On, integrated temperature monitoring and system fan

control. Included also is CD Pro with enhanced drivers and the new CD Plus

package containing 9 bundled soft-ware solutions including Norton AntiVirus,

Ghost, Virtual Drive.

1 - 2

FS15MainboardManual

The FS15 Mainboard

Package Checklist

If you discover any item below was damaged or lost, please contact your

vendor.

þThe mainboard þThis user manual

þOne FDD cable þOne ATA/66 cable

þ Two software CDs (CD Pro, CD Plus)

1 - 3

Overview

Main Features

■Easy Installation

||BIOS with support for Plug and Play, auto detection of IDE hard drives,

||LS-120|drives, IDE ZIP drives, Windows 95, Windows 98, Windows ME,

||Windows NT, Windows 2000, |and OS/2.

■Leading Edge Chipset

Intel 815EP provides integrated DRAM controllers with new Dynamic

Power Management Architecture (DPMA), concurrent PCI , and USB.

■Versatile Main Memory Support

Accepts up to 512MB SDRAM using three DIMMs of 32, 64, 128, 256,

512MB with support for lightning-fast 3.3V SDRAM (100/133MHz).

■CNR, AGP, and PCI Expansion Slots

One CNR, one AGP Bus expansion slot, and six PCI Bus expansion slots

provided the room to install a full range of add-on cards.

■Onboard IrDA Connector

An IrDA connector for wireless infrared connections is available.

■Flexible Processor Support

Onboard CPU socket supports:

Socket370 Platform for Intel® Celeron PPGA Processor 366-800MHz

Socket370 Platform for Intel® Coppermine FC-PGA Processor up to

1GHz

Socket370 Platform for VIA® Cyrix III Processor from 500 to 700* MHz

■Enhanced PCI Bus Master IDE Controller with Ultra DMA 33/66/100

Support

Integrated Enhanced PCI Bus Master IDE controller features two dual-

channel connectors that up to four Enhanced IDE devices, including CD-

ROM and Tape Backup Drives, as well as Hard Disk Drives supporting

the new Ultra DMA 100 protocol. Standard PIO Mode 3, PIO Mode 4,

DMA Mode 2, DMA Mode 4, UltraDMA-100 Mode 5 devices are also

supported.

1 - 4

FS15MainboardManual

■Integrated Audio Subsystem

Embedded audio features in the ICH2 with an integrated PCI audio con-

troller, DOS games compatible engine. The subsystem utilizes line-out,

line-in, and MIC mini-jack external jacks, one joystick port with MIDI

interface.

■■

■Super Multi Input/Output (I/O) Support

Integrated Plug and Play multi-I/O chipset features two high-speed UART

16550 compatible serial ports, one EPP/ECP capable parallel port, one

game port, and one FDD connector.

■■

■Convenient Rear Panel USB Connection Support

Two USB ports integrated in the rear I/O panel with two USB front panel

connections allow convenient and high-speed Plug and Play connec-

tions to the growing number of USB compliant peripheral devices on the

market.

■■

■Accelerated Graphics Port (AGP) Slot

The motherboard is installed one 32-bit AGP bus with a dedicated 66MHz/

133MHz path from the graphics card to the system memory offering much

greater bandwidth than the 32-bit PCI bus does. AGP enabled 3D graph-

ics cards can directly access main memory across this fast path instead of

using local memory. To make use of the improved AGP performance, the

motherboard should be installed with SDRAM type memory and the VGA

card and drivers should also be fully AGP compliant. Using Microsofts

Windows 98 and Windows 2000 which implement DirectDraw will allow

the system to take full use of AGPs benefits without the need to install

additional drivers.

■■

■Remote Ring and LAN Wake-Up Support

One LAN wake-up connector supports LAN cards equipped for remote

wake-up functionality; also, a BIOS feature allowing awakeness the sys-

tem while the ring signal via modem card.

1 - 5

Overview

FIC Unique Innovation for Users (NOVUS) -

Enhanced Mainboard Features and System Support

■■

■Logo Genie

A user friendly GUI supporting Windows 95/98 (not Windows 2000/NT/

ME), LogoGenie allows you to customize, create or select a Logo which

will be displayed when the system is booting.

NOTE:

1. LogoGenie supports Award BIOS only.

2. If you create a Logo file (.bmp) by LogoGenie, the file size must

||||be 640 x 464 x 256 colors.

ACPI Ready

This mainboard fully implements the new ACPI (Advanced Configuration and

Power Interface) 1.0B Hardware and BIOS requirement. If you install ACPI

aware of operating system, such as Windows 98, you fully utilized the power

saving under ACPI. (Windows ME/2000 Professional supports ACPI func-

tions.)

To enable this utility, please proceed as follows:

1. Insert CD Pro (4.2 or above). Select LogoGenie from the Menu and

follow the installation instructions.

2. After LogoGenie has been installed, go to Windows Start Box.

In Programs Menu, select LogoGenie 2.0, then select LogoGenie.

3. Press F1 to read Help file to understand how to use this software if

it is new to you.

■■

■Easy Key

Instead of completing the multi-layered BIOS setup process these 3 Easy

Key functions provide direct access to Sub-Menus when completing

BIOS settings adjustments.

Easy-Keys are as follows:

Ctrl + c: To enter clock settings menu.

Ctrl + p: To load Performance Default settings and restart.

Ctrl + f: To load Fail-Safe Default settings and restart.

1 - 6

FS15MainboardManual

■■

■Overclock Partner

Should the system not start because clock speed settings have been

increased to a speed incompatible with the system, the Overclock Partner

allows you to reboot at system default settings, protecting hardware from

any damages.

Complete the following steps:

1. Turn the system off.

2. Restart while holding down the Insert key. It is important that the

Insert key is held down until the default clock speed is shown on

the POST screen.

3. Enter BIOS settings menu, and re-set clock speed desired or default.

2 - 1

Installation Procedures

Chapter 2

Installation Procedures

The mainboard has several user-adjustable jumpers on the board that allow you to

configure your system to suit your requirements. This chapter contains information

on the various jumper settings on your mainboard.

To set up your computer, you must complete the following steps:

■ Step 1 - Set system jumpers/switches

■ Step 2 - Install memory modules

■ Step 3 - Install the Central Processing Unit (CPU)

■ Step 4 - Install expansion cards

■ Step 5 - Connect ribbon cables, cabinet wires, and power supply

■ Step 6 - Set up BIOS software

■ Step 7 - Install supporting software tools

WARNING: Excessive torque may damage the mainboard. When

using an electric screwdriver on the mainboard, make sure that

the torque is set to the allowable range of 5.0 ~ 8.0kg/cm.

Mainboard components contain very delicate Integrated Circuit

(IC) chips. To prevent static electricity from harming any of the

mainboard’s sensitive components, you should follow the

following precautions whenever working on the computer:

1. Unplug the computer when working on the inside.

2. Hold components by the edges and try not to touch the IC

||||chips, leads, or circuitry.

3. Wear an anti-static wrist strap which fits around the wrist.

4. Place components on a grounded anti-static pad or on the bag

that came with the component whenever the components are

separated from the system.

Altri manuali per FS15

Indice

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente