FIC AM35 Manuale utente
AM35
MAINBOARD
MANUAL
DOC No.: M01902
Rev. :A0
Date : 4, 2002
Part No. : 25-11635 -00
Handling Precautions
Warning:
1. Static electricity may cause damage to the integrated circuits on
the motherboard. Before handling any motherboard outside of its
protective packaging, ensure that there is no static electric charge
in your body.
2. There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same or an equivalent type
recommended by the manufacturer.
3. Discard used batteries according to the manufacturer’s
instructions.
4. Never run the processor without the heatsink properly and firmly
attached. PERMANENT DAMAGE WILL RESULT!
Observe the following basic precautions when handling the motherboard
or other computer components:
nWear a static wrist strap which fits around your wrist and is
connected to a natural earth ground.
nTouch a grounded or anti-static surface or a metal fixture such as a
water pipe.
nAvoid contacting the components on add-on cards, motherboards,
and modules with the golden fingers connectors plugged into the
expansion slot. It is best to handle system components by their
mounting brackets.
The above methods prevent static build-up and cause it to be discharged
properly.
Trademark
All trademarks mentioned in this manual are registered properly of
the respective owners.
Handling Precautions
This manual may not, in whole or in part, be photocopied, reproduced,
transcribed, translated, or transmitted in whatever form without the
written consent of the manufacturer, except for copies retained by the
purchaser for personal archival purposes.
Notice
i
TableofContents
Table of Contents
Chapter 1 Overview
Package Checklist .......................................................................... 1-2
The AM35 Mainboard .............................................................. 1-3
Main Features ................................................................................ 1-4
FIC Unique Innovation for Users (NOVUS) -
Enhanced Mainboard Features and System Support .................... 1-6
Chapter 2 Installation Procedures
Quick Reference (from Page 2-2 to 2-4) .......................................... 2-2
Mainboard Layout .................................................................... 2-2
1). Clear CMOS, Clear Password, FSB Speed Select
.......................................................................................... 2-3
2). Front Panel Block Cable Connection ............................ 2-3
3). CPU Fan Installation .................................................... 2-4
1). Set System Jumpers .................................................................. 2-4
Clear CMOS: CLR .............................................................. 2-4
Clear Password: CLP ......................................................... 2-5
FSB Frequency Select: FSB ............................................... 2-6
2). Install Memory Modules .......................................................... 2-6
3). Install the CPU .......................................................................... 2-8
4). Install Expansion Cards ............................................................. 2-8
5). Connect Devices ....................................................................... 2-10
Floppy Diskette Drive Connector ..................................... 2-10
IDE Device Connectors ..................................................... 2-10
ATX Power Connectors .................................................... 2-11
Fan Connectors ................................................................. 2-11
Wake-On-Ring Connector ................................................. 2-12
Quick Reference (German) G-1
Quick Reference (French) F-1
Quick Reference (Spanish) S-1
Quick Reference (Japanese) J-1
Quick Reference (Chinese) C-1
Quick Reference (Simplified Chinese) |||||||||||||SC-1
ii
AM35Mainboard Manual
Wake-On-Lan Connector .................................................. 2-12
CD Audio-In Connectors .................................................. 2-13
Front Panel Block, Power LED and Speaker Connector .... 2-13
PS/2 Keyboard and Mouse Connector ............................. 2-15
Game/MIDI Connector ...................................................... 2-15
Universal Serial Bus Connectors ....................................... 2-16
Serial Port Connectors ....................................................... 2-16
Printer Connector .............................................................. 2-17
Audio I/O Jacks ................................................................ 2-17
Chapter 3 BIOS Setup
CMOS Setup Utility ....................................................................... 3-1
Standard CMOS Setup ................................................................... 3-2
Advanced BIOS Features .............................................................. 3-4
Advanced Chipset Features .......................................................... 3-7
Integrated Peripherals .................................................................... 3-11
Power Management Setup ............................................................. 3-16
PnP/PCI Configurations ................................................................. 3-20
PC Health Status ............................................................................ 3-21
Frequency/Voltage Control ............................................................ 3-22
Load Fail-Safe Defaults .................................................................. 3-23
Load Optimized Defaults ................................................................ 3-23
Supervisor/User Password ............................................................ 3-23
Save and Exit Setup ....................................................................... 3-24
Exit without Saving ........................................................................ 3-24
1 - 1
Overview
Overview
Chapter 1
The new 1stMainboard®AM35Ôis an Micro ATX sized motherboard sup-
porting the latest generation of AMD®processors at industry leading speeds.
By utilizing DDR ( Double Data Rate ) transfer rate the 100/133 MHz system
bus effectively reaches Front Side Bus speeds of 200/266 MHz. The board
provides users with an ATA133 data transaction for hard drives and allows up
to 2 GB memory totally by 2 PC1600/PC2100 DIMM sockets.
The AM35 is based around the high performance V-link VIA ProSavageDDR
KM266Ôcore chip with VIA VT8233AÔ as a South Bridge. The AGP(2X/4X)
functions supported by KM266 provides you with a photo-realistic 3D expe-
rience suitable for the most robust 3D games and software environments.
AC97 Codec that embedded in VT8233A, ensures high quality sound effect.
The mainboard also comes equipped with the new NOVUS®range of innova-
tive features that assist in the installation and maintenance. The features in-
clude Easy Key, which provides instant keyboard access to the BIOS for
adjustments to Clock and Default settings and LogoGenie, which allows you
to create your own customized logo to be displayed during system boot up.
The BIOS Guardian is an Anti Virus utility that prevents viruses from damag-
ing your system BIOS and rendering your system inoperative.
Expansion is provided by 1 AGP(2X/4X) and 3 PCI slots. In addition, the
1stMainboard is equipped standard I/O connections include 2 serial ports (1
by pinheader), 1 parallel port, 1 VGA port, 1 PS/2 mouse and keyboard connec-
tor, 4 USB ports (2 by pinheader), 1 IR port by pinheader, and 1 media connec-
tor (Line-In, Line-Out, Mic-In, 1 front audio, 1 game port).
1 - 2
AM35Mainboard Manual
Package Checklist
If you discover any item below was damaged or lost, please contact your
vendor.
þThe mainboard þThis user manual
þOneFDD cable þ CD software
þOneATA100 cable
IMPORTANT:AMDCPUHEATSINKINSTALLATION
Be ware finish heat sink install. Before you boot system, please
check the heat sink is complete contact with die of CPU.
The poor contact will bring about over heat, it may damage your
processor.
Itisstrongly recommended that atleasta250-wattATXpower pupply
be used for this motherboard. Make sure that your ATX power sup-
ply can supply at least 20 amperes on teh +5-Volt lead and 10mA
on the +5-Volt standby lead (+5VSB). Your system may become
unstable / unreliable and may experience difficulty in powering up if
your power supply is inadequate.
NOTE: CD Pro that contains patch files, onboard video/audio chip
drivers, related online help and other useful information can be
found in your mainboard package.
Please install it right after your Windows operating system installa-
tion is done.
Place your CD Pro in the drive, an operating menu will
appears in your monitor. Please select
Auto Installation
. It will auto-
matically detect which software tools (patch files, drivers) that the
mainboard needs. Press OK button to go through the whole instal-
lation procedure in a very straight forward and easy way. It also
provides you with a custom way to select wanted patch files and
software drivers that for onboard chips use. The top menu of the
CD Pro lists all the functions that allowed by this board.
1 - 3
Overview
The AM35 Mainboard
1 - 4
AM35Mainboard Manual
Main Features
nEasy Installation
||BIOS with support for Plug and Play, auto detection of IDE hard drives,
||LS-120|drives, IDE ZIP drives, Windows 98SE, Windows ME, Windows
||NT, Windows 2000, Windows XP, and OS/2.
nLeading Edge Chipset
VIA KM266 is a single-chip North Bridge for AMD CPUs with 200/266
MHz Front Side Bus with AGP and PCI plus advanced memory controller
that supports PC1600/PC2100 DDR SDRAM. VIA VT8233A is a Vlink
client highly integrated controller that supports PC99-compliant system.
The VT8233A also supports ATA133 protocol.
nVersatile Main Memory Support
Accepts up to 2 GB DRAM using three DDR266 DIMMs from 256 MB to
2 GB with support for lightenning-fast (PC1600/PC2100) DDR SDRAM .
nEnhanced PCI Bus Master IDE Controller with UltraDMA/33/66/100/
133 Support
Integrated Enhanced PCI Bus Master IDE controller features two dual-
channel connectors that up to four Enhanced IDE devices, including CD-
ROM and Tape Backup Drives, as well as Hard Disk Drives supporting
the new UltraDMA/133 Mode 6 protocol, standard PIO Mode 3, PIO
Mode 4, DMA Mode 2, DMA Mode 4, UltraDMA/100 Mode 5 devices
are also supported.
nAMD Processors Support
Athlon: 700 MHz to 1.4 GHz and up*at 200 MHz FSB/
1.0 GHz to 1.4 GHz at 266 MHz FSB;
Athlon XP: 1500+ to 2100+ and up* at 266 MHz FSB;
Duron: 800 MHz to 1.3 GHz and up* at 200 MHz FSB
(*: not tested yet)
1 - 5
Overview
nAGP and PCI Expansion Slots
One AGP Bus and three PCI Bus expansion slots provided the room to
install a full range of add-on cards.
nCompact Onboard Audio Subsystem
Embeded in VIA VT8233A, an integrated high bandwidth Vlink client
controller, direct sound AC97 audio subsystem. UltraDMA master mode
EIDE controller, USB controller, ACPI enhanced power management, and
PC99 compliant.
nSuper Multi Input/Output (I/O) Support
Integrated Plug and Play multi-I/O chipset features two high-speed UART
16550 compatible serial ports, one EPP/ECP capable parallel port, one
VGA port, one IR port, one game port, and one FDD connector.
nConvenient Rear Panel USB Connection Support
Two USB ports integrated in the rear I/O panel and two extra USB ports
for either front or rear panel connection allow convenient and high-speed
Plug and Play connections to the growing number of USB compliant
peripheral devices on the market.
nOnboard Accelerated Graphics Port (AGP)
The motherboard is installed one 32-bit 1.5V AGP(2X/4X) bus with a
dedicated 66MHz/133MHz path from the graphics card to the system
memory offering much greater bandwidth than the 32-bit PCI bus does.
AGP enabled 3D graphics cards can directly access main memory across
this fast path instead of using local memory.
1 - 6
AM35Mainboard Manual
nBIOS Guardian
BIOS Guardian by default is enabled. It must be disabled in order to reflash
BIOS, thus effectively acts as a fire-wall against viruses that can attack
the BIOS while the system is running.
WARNING: While excute Step3 below, please do not turn off the
sytsem power in order to avoid BIOS damage.
BIOS Guardian can be disabled as follows:
1. Go to BIOS Set Up Menu. (Press Del key while booting.)
2. Go to Advanced BIOS Features Set Up Submenu.
3. Disable BIOS Guardian.
4. Save the setting, and restart system.
FIC Unique Innovation for Users (NOVUS) -
Enhanced Mainboard Features and System Support
nLogoGenie
A user friendly GUI supporting Windows 95/98/98SE (not Windows 2000/
NT/ME), LogoGenie allows you to customize, create or select a Logo
which will be displayed when the system is booting.
NOTE:
1. LogoGenie supports Award BIOS only.
2. If you create a Logo file (.bmp) by LogoGenie, the file size must
||||be 640 x 464 x 256 colors.
To enable this utility, please proceed as follows:
1. Insert CD Pro. Select LogoGenie from the Menu
and follow the installation instructions.
2. After LogoGenie has been installed, go to Windows Start Box.
In Programs Menu, select LogoGenie, then select LogoGenie.
3. Press F1 to read Help file to understand how to use this software if
it is new to you.
Altri manuali per AM35
1
Indice
Altri manuali FIC Scheda madre
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
