FIC FR33 Manuale utente
FR33
MAINBOARD
MANUAL
DOC No.: M00301
Rev. :A0
Date : 12, 2000
Part No. : 25-11505-20
i
Tableof Contents
Table of Contents
Chapter 1 Overview
Package Checklist ...................................................................... 1-1
The FR33 Mainboard ................................................................ 1-2
Main Features ................................................................................ 1-3
ACPI Ready ................................................................................... 1-4
Chapter 2 Installation Procedures
Quick Reference (from Page 2-2 to 2-4) .......................................... 2-2
Mainboard Layout .................................................................... 2-2
1). Clear CMOS Enable ...................................................... 2-3
2). Front Panel Block Cable Connection ............................ 2-3
3). CPU Fan Installation .................................................... 2-4
1). Set System Jumpers .................................................................. 2-5
Clear CMOS: CLR_CMOS ................................................. 2-6
2). Install Memory Modules .......................................................... 2-6
3). Install the CPU .......................................................................... 2-7
4). Install Expansion Cards ............................................................. 2-8
5). Connect Devices ....................................................................... 2-10
Floppy Diskette Drive Connector: FDD1 .......................... 2-10
IDE HDD Device Connectors: PRIMARY, ISECONDARY . 2-11
Infrared Connector: IR ....................................................... 2-11
ATX Power Connector: ATX ............................................ 2-12
CPU Fan Connector: JFAN1 .............................................. 2-12
System Case Fan Connector: JFAN2 ................................. 2-13
Wake-On-LAN Connector: WOL1 .................................... 2-13
Wake-On-Ring Connector: WOR1 .................................... 2-14
CD Audio-In Connector: CD_IN, CD_IN1 ........................ 2-14
Front Panel Block Connector: J3 ....................................... 2-15
PS/2 Keyboard and Mouse Connector: KB, MS ............... 2-16
Universal Serial Bus Connectors: Rear USBs
and Front USBs ................................................................. 2-16
Serial Port Connectors: COM1, COM2 .............................. 2-17
Video Graphics Accelerator Connectors: VGA .................. 2-17
ii
FR33MainboardManual
Chapter 3 BIOS Setup
CMOS Setup Utility ....................................................................... 3-1
Standard CMOS Setup ................................................................... 3-2
Advanced BIOS Features .............................................................. 3-4
Advanced Chipset Features .......................................................... 3-8
Integrated Peripherals .................................................................... 3-12
Power Management Setup ............................................................. 3-17
PnP/PCI Configurations ................................................................. 3-21
PC Health Status ............................................................................ 3-23
Frequency/Voltage Control ............................................................ 3-24
Load Fail-Safe Defaults .................................................................. 3-25
Load Optimized Defaults ................................................................ 3-25
Supervisor/User Password ............................................................ 3-26
Save and Exit Setup ....................................................................... 3-27
Exit without Saving ........................................................................ 3-27
Quick Reference (German) G-1
Quick Reference (French) F-1
Quick Reference (Spanish) S-1
Quick Reference (Japanese) J-1
Quick Reference (Chinese) C-1
Quick Reference (Simplified Chinese) |||||||||||||SC-1
Printer Connector: LPT ...................................................... 2-18
Audio I/O Jacks: LINE_OUT, LINE_IN, MIC_IN,
FNT_AUDIO ..................................................................... 2-18
GAME/MIDI Connector: GAME ....................................... 2-19
1 - 1
Overview
Overview
Chapter 1
The Micro ATX, Socket 370 1stMainboard FR33 supports both the latest
generation Intel® and Cyrix processors. Intels new Celeron FC-PGA and
super fast Pentium FC-PGA Pentium®III processors are supported with Front
Side Bus speeds of 66 /100/133 MHz, while Cyrix III Processors are supported
at Front Side Bus speeds of 100/133 MHz.
The 1stMainboard FR33 is built around the new VIA Apollo PLE
(VT8601+686A) chipset supporting both DVD and AGP 1/2x, thus ensuring
photo-realistic 3D. Onboard AC97 sound ensures high quality audio, while
providing the option of being disabled through the BIOS. Support for the
Ultra DMA/66 protocol ensures for high data transfer speeds especially for
long sequential transfers required by audio/visual applications. With 2 DIMM
there is up to 1 GB available SDRAM.
Expansion is provided by 1 AMR, 1 ISA and 2 PCIs. I/O connections include
2 serial ports, 1 parallel port, 1 VGA port, 1 PS/2 mouse and keyboard connec-
tor, 4 USB connectors and 1 media connector (Line-In, Line-Out, Mic-In, Game/
Midi).
Package Checklist
Ifyoudiscoveranyitembelowwasdamagedorlost,pleasecontactyour
vendor.
þThe mainboard þThis user manual
þOneFDD cable þOne HDD cable
þOneATA/66cable þ Two software CDs (CD Pro, CD Plus)
þ
1 - 2
FR33MainboardManual
The FR33 Mainboard
1 - 3
Overview
Main Features
■Easy Installation
||BIOS with support for Plug and Play, auto detection of IDE hard drives,
||LS-120|drives, IDE ZIP drives, Windows 95, Windows 98, Windows ME,
|Windows NT, Windows 2000, |and OS/2.
■Leading Edge Chipset
VIA Apollo PLE133 (VT8601+686A) chipset provides integrated DRAM
controllers with new Dynamic Power Management Architecture (DPMA),
concurrent PCI (2.1), AGP 1.0 compliant and USB. It offers integrated
Trident graphics, DVD-capable multimedia (MPEG-2 & AC-3) accelerators
■Advanced High Performance Memory Controller
Accepts up to 1GB DRAM using two DIMMs of 32, 64, 128, 256, 512MB
with support for lightenning-fast PC133 SDRAM. Supports FP, EDO,
SDRAM.
■Enhanced IDE Controller with Ultra DMA/33 and Ultra DMA/66
Support
Enhanced IDE controller features two dual-channel connectors that up to
four enhanced IDE devices, including CD-ROM and Tape Backup Drives,
as well as Hard Disk Drives supporting the new Ultra DMA/66 protocol.
Standard PIO Mode 3, PIO Mode 4, DMA Mode 2, DMA Mode 4 devices
are also supported.
■Flexible Processor Support
Onboard CPU socket supports:
Intel® Celeron FC-PGA 533/566/600/633/667/700/733/766 MHz at 66 MHz
FSB; Intel® Celeron FC-PGA 800 MHz at 100 MHz FSB
Intel® Pentium III FC-PGA 500/550/600/650/700/750/800/850 MHz at
100MHz FSB
Intel® Pentium III FC-PGA 533/600/667/733/800/866/933 MHz/1 GHz at
133MHz FSB
Cyrix® III 533-650 MHz and beyond* at 100/133 MHz FSB
(*: not yet test)
1 - 4
FR33MainboardManual
■AMR, ISA and PCI Expansion Slots
One AMR (Audio Modem Riser), one ISA Bus expansion slot and two
PCI Bus expansion slots provided the room to install a full range of add-
on cards.
■Compact Onboard Audio Subsystem
Embeded in VIA 686A, the audio processor offers mainly in the aspects
of dual full-duplex Direct Sound channels, PCI master interface, stan-
dard AC97 (1.0/2.0) Codec interface, direct two game ports and one MIDI
port interface, and complete software driver support for Windows 95/98/
NT.
■■
■■
■Super Multi Input/Output (I/O) Support
Embeded in 686A, the features that included are dual full-duplex Direct
Sound channels between system memory and AC97 link; PCI master in-
terface with bursting capability; standard AC97 Codec interface (1.0/2.0);
hardware SoundBlaster Pro for Windows DOS box and real-mode DOS
legacy compatibility; plug and play with 4 IRQ, 4 DMA, and 4 I/O space
options for SoundBlaster Pro and MIDI hardware.
■■
■■
■Convenient Rear Panel USB Connection Support
Two USB ports integrated in the rear I/O panel and two USB ports for
front panel connection allow convenient and high-speed Plug and Play
connections to the growing number of USB compliant peripheral devices
on the market.
ACPI Ready
This mainboard fully implements the new ACPI (Advanced Configuration and
Power Interface) 1.0 Hardware and BIOS requirement. If you install ACPI aware
of operating system, such as Windows 98, you fully utilized the power saving
under ACPI. (Windows 2000/ME Professional supports ACPI functions.)
2 - 1
Installation Procedures
Chapter 2
Installation Procedures
The mainboard has several user-adjustable jumpers on the board that allow you to
configure your system to suit your requirements. This chapter contains information
on the various jumper settings on your mainboard.
To set up your computer, you must complete the following steps:
■ Step 1 - Set system jumpers/switches
■ Step 2 - Install memory modules
■ Step 3 - Install the Central Processing Unit (CPU)
■ Step 4 - Install expansion cards
■ Step 5 - Connect ribbon cables, cabinet wires, and power supply
■ Step 6 - Set up BIOS software
■ Step 7 - Install supporting software tools
WARNING: Excessive torque may damage the mainboard. When
using an electric screwdriver on the mainboard, make sure that
the torque is set to the allowable range of 5.0 ~ 8.0kg/cm.
Mainboard components contain very delicate Integrated Circuit
(IC) chips. To prevent static electricity from harming any of the
mainboard’s sensitive components, you should follow the
following precautions whenever working on the computer:
1. Unplug the computer when working on the inside.
2. Hold components by the edges and try not to touch the IC
||||chips, leads, or circuitry.
3. Wear an anti-static wrist strap which fits around the wrist.
4. Place components on a grounded anti-static pad or on the bag
that came with the component whenever the components are
separated from the system.
2 - 2
FR33MainboardManual
Mainboard Layout
Quick Reference (from Page 2-2 to 2-4)
2 - 3
Installation Procedures
1). Clear CMOS Enable
2). Front Panel Block Cable Connection
Altri manuali per FR33
1
Indice
Altri manuali FIC Scheda madre
FIC
FIC AM35 Manuale utente
FIC
FIC PA-2005 Manuale utente
FIC
FIC VA-501 Manuale utente
FIC
FIC PA-2013 Manuale utente
FIC
FIC P4-875P MAX Manuale utente
FIC
FIC VA-502 Manuale utente
FIC
FIC AZ11 Manuale utente
FIC
FIC 1st Mainboard KC19+ Manuale utente
FIC
FIC 1stMainboard VG33 Manuale utente
FIC
FIC AM39L Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
