FIC PA-2006 Manuale utente
PA-2006
MAINBOARD
MANUAL
DOC No. : 15579
Rev. : A2
Date : 4, 1997
Part No. : 25-10580-05
i
Chapter 1 Overview
Main Features........................................................................................ 2
This User Manual .................................................................................. 4
Something Interesting............................................................................. 5
The BIOS Setup Utility................................................................. 5
IRQ Functionality.......................................................................... 6
DMA Channels of ISA Cards ........................................................ 7
Enhanced IDE............................................................................... 7
Serial Infrared (SIR) Connections.................................................. 8
Highly Convenient Integrated I/O Connectors................................ 9
Chapter 2 Installation Procedures
Mainboard Layout.................................................................................. 12
1). Set System Jumpers .......................................................................... 13
Jumpers ........................................................................................ 13
Clear Password: CPW............................................................ 14
Flash EPROM Type Selection: EP1, EP2............................... 14
CPU to SRAM Data Transacting Mode Selection: SRAM3 ... 15
2). Install DRAM Modules..................................................................... 16
DRAM and SDRAM..................................................................... 16
RAM Module Configuration.......................................................... 17
Install SIMMs............................................................................... 20
Remove SIMMs............................................................................ 20
Install DIMMs .............................................................................. 21
Remove DIMMs............................................................................ 21
Cache Memory.............................................................................. 22
Install Cache SRAM Module......................................................... 22
Onboard Cache SRAM (256KB/512KB) ....................................... 23
Onboard Cache SRAM and SDRAM Module Mixture
(512KB/1MB)............................................................................... 24
SRAM Module (256KB/512KB)................................................... 25
3). Install the CPUs................................................................................ 26
System Clock Selection:
CLK1, CLK2, CLK3.............................................................. 27
Table of Contents
PA-2006 Mainboard Manual
ii
CPU to Bus Frequency Ratio Selection:
FREQ1, FREQ2..................................................................... 27
Intel Pentium CPUs............................................................... 28
Frequency......................................................................... 28
Voltage............................................................................. 29
AMD-K5/K6 CPUs................................................................ 30
Frequency......................................................................... 30
Voltage............................................................................. 31
Cyrix 6x86 CPUs................................................................... 32
Frequency......................................................................... 32
Voltage............................................................................. 33
IBM 6x86 CPUs.................................................................... 34
Frequency......................................................................... 34
Voltage............................................................................. 35
Installation of Cyrix (or IBM) 6x86 CPU Fan......................... 36
4). Install Expansion Cards .................................................................... 37
5). Connect Cables and Power Supply .................................................... 39
Keyboard Connector: AT_KB ................................................ 39
Serial Port Connectors: COM1 and COM2............................. 39
CPU Fan Connectors: FAN.................................................... 40
Floppy Diskette Drive Connector: FLOPPY ........................... 40
Front Panel Block Connector: F_PNL .................................... 41
Infrared Connector: IR ........................................................... 42
Outlet Connector: OUTLET................................................... 42
Power Connector: POWER .................................................... 43
IDE HDD Device Connectors:
PRIMARY and SECONDARY .............................................. 44
Printer Block Connector: PRINTER....................................... 44
Remote Power Connector: RPW_CON................................... 45
Universal Serial Bus Connector: USB1 and USB2
(Reserved For Future Upgrade).............................................. 45
Chapter 3 Award BIOS Setup
CMOS Setup Utility............................................................................... 47
Standard CMOS Setup........................................................................... 48
BIOS Features Setup.............................................................................. 50
Installation Procedures
iii
Chipset Features Setup........................................................................... 53
Power Management Setup...................................................................... 58
PCI Configuration Setup......................................................................... 61
PnP Configuration Setup........................................................................ 63
Load BIOS Defaults............................................................................... 64
Load Setup Defaults............................................................................... 64
Supervisor/User Password...................................................................... 64
IDE HDD Auto Detection....................................................................... 65
Save and Exit Setup............................................................................... 66
Exit without Saving................................................................................ 66
Appendix A Applicatin Note
PA-2006 Mainboard Manual
iv
This Page Intentionally Left Blank
1
Overview
The PA-2006 mainboard combines the advanced capabilities of the VIA 580VP
chipset with a high-performance concurrent PCI local bus architecture to
provide the ideal platform for unleashing the unsurpassed speed and power of
the Intel Pentium processor.
This highly-flexible mainboard is designed to run a full range of Intel Pentium,
Cyrix 6x86 (M1/M2), IBM 6x86 (M1/ M2), and AMD-K5/K6 processors, and
can be easily upgraded using its 321-pin ZIF socket. The processor's advanced
performance is complemented by a second level write back Pipeline Burst
SRAM cache of up to 1MB (by one cache RAM module slot for 1MB PBSRAM
cache module) and main memory of up to 384MB DRAM. The main memory is
installed using the board's two 72-pin SIMM sockets and two 168-pin DIMM
sockets that accept a choice of lightning-fast synchronous DRAM (SDRAM)
and high-speed EDO DRAM.
The PA-2006 integrates a full set of I/O features onboard, including two
16550A UART compatible serial ports, one EPP/ECP capable parallel port, and
one Floppy Disk Drive controller. It also comes with a built in Enhanced IDE
controller that provides convenient, high-speed PCI Bus Master connections
with up to four IDE devices, including Hard Disk and CD-ROM drives. Four
16-bit ISA slots and four 32-bit PCI slots provide ample room for further
expansion. The mainboard also features support for the state-of-the-art
Universal Serial Bus (USB) that provides ease-of-use and high-speed Plug &
Play connections to future USB compliant peripheral devices. The IrDA
compliant serial port and onboard SIR support further enhance system I/O
connectivity.
This chapter gives you a brief overview of the PA-2006 mainboard. In addition
to basic information on the board's main components and features, it also
provides advice on how to upgrade and expand it. For updated BIOS, drivers,
or product release information, please visit FIC's home page at:
http://www.fic.com.tw.
Chapter 1
PA-2006 Mainboard Manual
2
Main Features
The PA-2006 mainboard comes with the following high-performance features:
nEasy Installation
Award BIOS with support for Plug and Play, auto detection of Hard Drive
and IDE features, MS Windows 95, and Windows NT compatible.
nFlexible Processor Support
Onboard 321-pin ZIF socket and switching voltage regulator support
complete range of leading-edge processors:
Intel Pentium75MHz – 200MHz (P55C with MMXtechnology;
P54C/P54CS)
AMD-K6-PR166 – PR233
AMD-K5-PR75 – PR166
Cyrix M2 Series processors
Cyrix 6x86-PR120+ – PR200+*
IBM M2 Series processors
IBM 6x86-PR120+ – PR200+*0.
NOTE : * Support for Cyrix 6x86-PR200+ and IBM 6x86-PR200+ is optional.
nLeading Edge Chipset
VIA 580VP chipset, including a CPU interface controller, advanced
cache controller, integrated DRAM controller, synchronous ISA bus
controller, PCI local bus interface, integrated power management unit.
nUltra-fast Level II Cache
Supports onboard 256KB/512KB synchronous PBSRAM cache memory
and one cache module slot for 1MB PBSRAM cache module.
nVersatile Main Memory Support
Accepts up to 256MB RAM in one bank using 72-pin SIMMs of 4, 8, 16,
32, 64, 128MB or up to 128MB RAM in two banks using two 168-pin
DIMMs of 8, 16, 32, 64MB with support for SDRAM and EDO memory.
nISA & PCI Expansion Slots
Four 16-bit ISA and four 32-bit PCI expansion slots provide all the room
you need to install a full range of add-on cards.
Overview
3
nUSB Support
Onboard support for two Universal Serial Bus connectors via a plug-in
connector.
nEnhanced PCI Bus Master IDE Controller
Integrated Enhanced PCI local bus IDE controller with two connectors
supports up to four IDE devices such as Hard Disk, CD-ROM or Tape
Backup drives via two channels for high speed data throughput. This
controller supports PIO Modes 3 and 4, and DMA Mode 2 for optimized
system performance.
nSuper Multi I/O
Integrated Winbond 83877F chipset features two 16550A UART
compatible serial ports, one EPP/ECP capable parallel port, one IR port,
and
one Floppy Disk Drive connector.
PA-2006 Mainboard Manual
4
This User Manual
This manual is designed to guide you and facilitate your use of the PA-2006
mainboard. It contains a description of the design and features of the
mainboard, and also includes useful information for changing the configuration
of the board and the system it is installed in. The manual is divided into three
chapters:
nChapter 1 - Overview
gives an overview of the mainboard and describes its major components
and features.
nChapter 2 - Installation Procedures
gives instructions on how to set up the mainboard, including jumper
settings and CPU installation guides.
nChapter 3 - Award BIOS Setup
briefly explains the mainboard's BIOS system setup in general and tells
you
how to run it and change the system configuration settings.
NOTE : The material in this manual is for information only and is subject to
change without notice. We reserve the right to make changes in the product
design without reservation and without notification to its users. We shall not be
liable for technical or editorial omissions made herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of
this material.
Overview
5
Something Interesting
This section provides useful information that you will need to know should you
decide to modify or upgrade the configuration of the mainboard and the system
it is installed in. If you do not have the confidence to upgrade the mainboard
yourself, we advise that you consult a qualified service technician for
assistance.
The BIOS Setup Utility
The BIOS (Basic Input Output System) is the basic firmware that instructs the
computer how to operate. For the BIOS to work properly, there must be a
record of the computer's hardware and configuration settings for it to refer to.
This record is created using the Setup Utility, a program that is stored
permanently in the BIOS ROM chip on the mainboard.
The system configuration record created by the Setup Utility is also stored on
the mainboard, but not permanently. This section of the memory it is stored is
in the NVRAM.
When you buy your computer, the system configuration record will already be
set and may in some cases differ from the basic defaults. The first time you use
your computer or when you need to re-configure your system, you should run
the Setup Utility and write down the settings.
Indice
Altri manuali FIC Scheda madre
FIC
FIC AM35 Manuale utente
FIC
FIC P4-865PE MAX Manuale utente
FIC
FIC KT-400A Manuale utente
FIC
FIC FR33 Manuale utente
FIC
FIC PT-2006 Manuale utente
FIC
FIC AT31 Istruzioni per il montaggio
FIC
FIC K8M-800T/M Manuale utente
FIC
FIC AN19E Manuale utente
FIC
FIC 1stMainboard VG33 Manuale utente
FIC
FIC PA-2005 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
