Flexitron webdyn MTX-StarWater Manuale utente
MTX-StarWater
Power-Up Guide
www.webdyn.com
contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
2
Index
Power-Up Guide................................................................................................................ 3
1. Plug In the Water Meter........................................................................................................................ 3
2. Insert the microSIM Card in the Folding Tray...................................................................................... 4
3. Plug In the Battery Connector.............................................................................................................. 5
4. Start the Operation............................................................................................................................... 6
5. Connect the Interface Cable ................................................................................................................ 6
Sales Contact ................................................................................................................... 7
contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
3
Power-Up Guide
Following this guide you will learn how to connect your Starwater device to a pulse water meter.
1. Plug In the Water Meter
• Loosen the cable gland and introduce the cable.
• It is highly recommended to use cable end caps for a proper connection.
contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
4
• Connect the meter cables following the next pinout:
GNDPulse Tamper
• Tighten the cable gland to prevent moisture from entering.
2. Insert the microSIM Card in the Folding Tray
• To unlock the tray, slide it towards push button near.
• Close and lock the tray sliding it.
contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
5
3. Plug In the Battery Connector
4. Start the Operation
contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
6
• Push the reading button to initialize the system for the rst time after connecting the battery.
• This button forces an immediate reading of the internal register pulse counter and a connection
to the cloud platform to upload data and check for pending commands. You can also use this
function approaching a magnet from outside of the enclosure near to the same place. To avoid
wasting battery, there is a maximum of 10 times a day for this functionality.
5. Connect the Interface Cable
• This cable is used to apply some local congurations if required. For that, please contact our
support team to get the latest version of the StarwaterApp Desktop Tool.
contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
7
Sales Contact
SPAIN
C/ Alejandro Sánchez 109
28019 Madrid
Phone 1: 902.19.81.46
Phone 2: +34-91.560.27.37
Email: [email protected]
FRANCE
26 Rue des Gaudines
78100 Saint-Germain-en-Laye
Phone: +33.139042940
Email: [email protected]
INDIA
803-804 8th oor, Vishwadeep Building
District Centre, Janakpurt, 110058 New Delhi
Phone: +91.1141519011
Email: purchase-india@webdyn.com
PORTUGAL
LusoMatrix Lda.
Av. Coronel Eduardo Galhardo 7-1ºC
1170-105 Lisbon, Portugal
Phone: +351.218162625
Email: [email protected]
A PA C
9F, No. 156, Sec. 3, Minsheng E. Rd.
Songshan Dist., Taipei City 10596, Taiwan
Phone: +886.965333367
Email: [email protected]
AUE
Dubai
Phone: +34.915602737
Email: [email protected]
USA
Chicago
Phone: +34.915602737
Email: [email protected]
Altri manuali per webdyn MTX-StarWater
2
Indice
Altri manuali Flexitron Strumento di misura
Flexitron
Flexitron TAXITRONIC TX80 Urba Manuale utente
Flexitron
Flexitron TAXITRONIC TX80 Urba Manuale utente
Flexitron
Flexitron TAXITRONIC TX80 Urba Manuale utente
Flexitron
Flexitron webdyn MTX-StarWater Manuale utente
Flexitron
Flexitron MTX-StarSensor Manuale utente
Flexitron
Flexitron webdyn MTX-StarEnergy-E Manuale utente
