Alpeco Limited, 66 - 69 Rabans Lane,
W: alpecoltd.com
To View compartment contents
The on-screen compartment graphic showing the grade and volume in each
compartment can be viewed on screen at any time by pressing the MENU key and
selecting Inventory followed by OK, press key to exit to start screen.
Note: Compartment graphics are also displayed during delivery set up.
Note: In the event of a wrong entry during delivery set up – Press the key to return to
previous function or start screen.
Pump/Manifold/Meter Discharge
1. Insert ticket into Epson printer and press forward button (Ensure red light goes out).
2. Open the CHECKMATE control module and Pull RED ON/OFF control switch.
Note: It is not necessary to pull the footvalve switches as footvalves will open
automatically when compartment is selected.
Set up a new delivery as follows:
Note: In the event of a wrong entry during delivery set up – Press the key to
return to previous function or start screen.
3. Press START to display Scenario menu, use keys to scroll to desired delivery
mode, i.e., Hose reel, Bulk or product return confirm with OK
4. From the Products menu, use to scroll to the product to be delivered i.e., DIESEL
confirm with OK
5. From the SOURCE menu use to scroll to the compartment from which the
product is to be taken, confirm with OK
Note: only compartments containing the selected product grade will be displayed
6. From the INSERT PRESET QTY menu use the numeric keys to enter the required
volume, confirm with OK.
Press START key to run the delivery.
Note: Once running the delivery can be stopped and re-started at any time by
pressing the STOP/RESUME keys.
7. When the preset volume is reached the delivery will stop automatically and after
a few seconds the PRINT key will become active – press PRINT to terminate the
delivery and print the delivery ticket.
Note: When BULK delivery is used the bulk hose will be blown down at the same time
as the ticket is printed.
2
