Fluke 1742 Guida alla configurazione

Manual Supplement

Manual Title: 1742/1746/1748 Users Supplement Issue: 2

Part Number: Web-Only Issue Date: 8/18

Print Date: October 2017 Page Count: 5

Revision/Date:

This supplement contains information

necessary to ensure the accuracy of

the above manual.

1742/1746/1748 Users Manual Supplement

8/18 1

Change #1, 562

On page 28, replace the Note with:

Note

Most power quality standards, such as EN 50160, 9,

GOST 33073 refer to IEC 61000-4-30 Class A

measurement methods that require Harmonic Sub-

Groups.

Under examples replace the first paragraph with:

Select Harmonic Components for measurements according to

standards that require the harmonics components measurement

according to IEC 61000-4-7, for example IEEE 519 or IEC 61000-3-12.

On page 52, under Environmental Specifications replace the

Operating Temperature with:

Operating…..-25 °C to +50 °C (-13 °F to +122 °F) warm up the Product to

-10 °C (14 °F) before you turn on power.

Change #2, 597

On page 12, replace the Measurement Line Power Source

section with:

Measurement Line Power Source:

XWWarning

To prevent injury, do not touch the metal parts of one test lead

when the other is still connected to hazardous voltage.

WCaution

To prevent damage to the Product, make sure the measured voltage

does not exceed the input rating of the power supply.

1. Attach the power supply to the Logger.

2. Move the slide-cover on the power supply to access the safety

sockets.

3. Connect the short test leads (see Figure 7B & 7C) with the

power supply inputs. Make sure to use the non-stackable plugs.

The test leads are rated for measurement/overvoltage CAT III

1000 V and CAT IV 600 V.

Manual Supplement 1742/1746/1748 Users

2 8/18

4. Connect the test leads with the voltage measurement inputs:

 Connect A/L1 with one input of the power supply.

 Connect N with the second input of the power supply.

 Connect A/L1 with one input of the power supply.

 Connect B/L2 with the second input of the power supply.

5. Use the short fan out of the Voltage Test Lead, 3-phase + N.

Plug the connector A/L1 into the socket A/L1 of the voltage

measurement inputs of the Logger. Repeat this with B/L2, C/L3

and N.

Manual Supplement 1742/1746/1748 Users

3 8/18

 For measurement connection to the Logger (see Figure

7A):

POWERQUALITYLOGGER

1746

POWER QUALITY LOGGER

1746



Figure 7A: Measurement connection to the Logger

1742/1746/1748 Users Manual Supplement

8/18 4

 To supply power to the Logger from installations with neutral

voltage (see Figure 7B):

POWERQUALITY LOGGER

1746

Figure 7B: Measurement with neutral voltage and supplying

instrument power. Note

On single-phase systems, use the set of 1.5 m test leads (item 8

in Figure 7).

6. Connect the voltage inputs to the test points.

The Logger automatically turns on and is ready to use in <30

seconds.

Manual Supplement 1742/1746/1748 Users

5 8/18

 To supply power to the Logger from installations without neutral

voltage (see Figure 7C):

POWERQUALITY LOGGER

1746

Figure 7C: Measurement without neutral voltage and supplying

instrument power.

Note

On single-phase systems, use the set of 1.5 m test leads (item 8

in Figure 7).

7. Connect the voltage inputs to the test points.

The Logger automatically turns on and is ready to use in <30

seconds.

Altri manuali per 1742

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fluke Strumento di misura

Fluke

Fluke OptiFiber Pro Manuale utente

Fluke

Fluke 43B Manuale utente

Fluke

Fluke 732a Manuale utente

Fluke

Fluke IRR2-BT Manuale utente

Fluke

Fluke 9140 Manuale utente

Fluke

Fluke 6050H Manuale utente

Fluke

Fluke 323 PLUS Manuale utente

Fluke

Fluke 789 Manuale per l'uso e la cura

Fluke

Fluke ProcessMeter 787 Istruzioni originali

Fluke

Fluke LinkSprinter 100 Manuale utente

Fluke

Fluke 80i-600 Manuale utente

Fluke

Fluke BT520 Manuale utente

Fluke

Fluke ScopeMeter 190-102 Manuale utente

Fluke

Fluke RaySafe 452 Manuale utente

Fluke

Fluke VIBXPERT II Manuale utente

Fluke

Fluke FiberInspector Pro OFTM-5352 Manuale utente

Fluke

Fluke DSX-600 CableAnalyzer Manuale per l'uso e la cura

Fluke

Fluke 78 Manuale utente

Fluke

Fluke VT Plus HF Manuale utente

Fluke

Fluke 336 Manuale tecnico

Fluke

Fluke CableAnalyzer DSP-4100 Manuale utente

Fluke

Fluke i800 Manuale utente

Fluke

Fluke 323 Manuale utente

Fluke

Fluke FL700G01 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente