Fluke 73 III Manuale utente

Supplement

© 2004 Fluke Corporation. All rights reserved. Printed in the U.S.A. x

Manual Title: 73 Series III Instruction Sheet

Part Number: 1646063 Supplement Issue: 1

Print Date: Feb. 2002 Issue Date: 8/04

Revision/Date: Page Count: 3

This supplement contains information

necessary to ensure the accuracy of the

above manual.

73 Series III Instruction Sheet Supplement

8/04 1

Change #1

On the first panel, under Warning, add the following:

Do not use this meter in a manner not

specified by the instruction sheet or the

protection provided by the meter may be

impaired.

Under General Specifications, change the following:

From: Shock, Vibration per MIL-T-PRF 28800F

Class III, Sinusoidal,

Non Operating.

To: Vibration per MIL-PRF-28800 for

a Class II instrument.

Shock 1 Meter drop per IEC

61010-1:2001.

From: Safety 600 VCAT II per

ANS/ISA S82.01-1994,

EN 61010-1: 1993, CSA

C22.2 No 1010.1-92,

UL 3111-1.

To: Safety Complies with ANSI/ISA

S82.01-2004, CSA 22.2

No. 1010.1:2004 to 600

V Overvoltage Category

II, listed to UL61010-1.

Licensed by TÜV to

EN61010-1.

Change #2

Under Continuity Test ( R):

Change: (resistance <210 e)

To: (resistance <150 e)

Supplement 73 Series III Instruction Sheet

2 8/04

Change #3

On the first panel, under Safety Information, add the

following:

•If this product is used in a manner not specified by the

manufacturer, the protection provided by the

equipment may be impaired.

•Before use, verify the meter’s operation by measuring

a known voltage.

•Avoid working alone.

•Adhere to local and national safety codes. Individual

protective equipment must be used to prevent shock

and arc blast injury where hazardous live conductors

are exposed.

On the first panel, under Safety Information, replace the first

bullet:

From: Never use the meter if the meter or test leads look

damaged.

To: Do not use the meter if it is damaged. Before you

use the meter, inspect the case. Look for cracks or

missing plastic. Pay particular attention to the

insulation surrounding the connectors.

Inspect the test leads for damaged insulation or

exposed metal. Check the test leads for continuity.

Replace damaged test leads before you use the

meter.

On the first panel, prior to the Warning, add the following

Caution:

Caution

To avoid possible damage to the meter

or to the equipment under test, follow

these guidelines:

73 Series III Instruction Sheet Supplement

8/04 3

•Disconnect circuit power and discharge

all high-voltage capacitors before testing

resistance,continuity, or diodes.

•Use the proper terminals, function, and

range for your measurements.

•Before measuring current, check the

meter’s fuses and turn power OFF to the

circuit before connecting the meter to the

circuit.

Indice

Altri manuali Fluke Strumento di misura

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente