Fluke I1000s Guida alla configurazione

Manual Supplement

Manual Title: i1000s Calibration Supplement Issue: 1

Part Number: 1574933 Issue Date: 7/01

Print Date: May 2001 Page Count: 2

Revision/Date:

This supplement contains information necessary to ensure the accuracy of

the above manual. Enter the corrections in the manual if either one of the

following conditions exist:

1. The revision letter stamped on the indicated PCA is equal to or higher

than that given with each change.

2. No revision letter is indicated at the beginning of the change.

i1000s Calibration Manual Supplement

7/01 1

Change #1

On page 8, Table 4, under Recommended Model,

Replace:

Digital Multimeter Hp 3458A or equivalent

With:

Digital Multimeter Agilant 3458A or equivalent

Delete the following from Table 4,

AC/DC Shunt IET Labs-DCCS-200 0.1e- 0.1% non-inductive

Replace the entire

Phase Shift

section, Table 5 and Figure 3 with the following:

Phase Shift Test

To check Phase Shift performance, set up the equipment as shown in Figure 3.

1. Center the Current Probe around the coil.

2. Set the calibrator output to 1V (phase meter reference input), 1A and 50 Hz, per step 1 of Table 5.

Performance Test Steps.

3. Verify that the phase meter reading is within the “Phase in Deg” limits of Table 5.

Table 5. Performance Test Steps

i1000s

mV Output Phase in Deg.

Step Coil Range 5520A

Output

5500A

Coil

I. Prim. Freq. Min. Max. Min. Max.

1 50 turn 1 mV/A 1 A 50.0 A 50 Hz 48.5 51.5 -3.0 3.0

2 50 turn 1 mV/A 2 A 100 A 400 Hz 98.0 102.0 N/A N/A

3 50 turn 1 mV/A 4 A 200 A 60 Hz 197.0 203.0 -2.0 2.0

4 50 turn* 1 mV/A 14 A 700 A 50 Hz 692.0 708.0 -2.0 2.0

5 1 turn 10 mV/A 5 A N/A 50 Hz 44.0 56.0 -15.0 15.0

6 50 turn 10 mV/A 0.4 A 20 A 50 Hz 191.0 209.0 -10.0 10.0

7 50 turn 10 mV/A 2 A 100 A 50 Hz 975.0 1025.0 -10.0 10.0

8 1 turn 100 mV/A 0.50 A N/A 50 Hz 38.5 61.5 N/A N/A

9 1 turn 100 mV/A 2.00 A N/A 50 Hz 184.0 216.0 -15.0 15.0

10 1 turn 100 mV/A 10 A N/A 50 Hz 960.0 1040.0 -15.0 15.0

* 700 A/ 50 Hz in 1 mV/A range has a TUR of 3.3

4. Continuing to use 1V as the phase meter reference input, set the calibrator output for the remaining

steps listed in Table 5. Steps 2 and 8 do not require phase tests.

5. Verify that the phase meter readings meet the "Phase in Deg" limits for each step.

Manual Supplement i1000s Calibration

27/01

0•

123

456

789

ENTER

mVHz

FIELD

EDIT

OPRSTBY EARTH SCOPE

EXGRD MENU

SHIFT

RESET

SETUP

REF

NEW

MEAS

¡F

dBm sec

¡C

POWER

MULT

DIV

MODES

5520A

CALIBRATOR

TRIG

GUARD

20A

NORMAL AUX SCOPE

OUT

V, , ,RTD A, -SENSE, AUX V

20V PK MAX

mV Output

Black

Red

5520A calibrator

Phase meter

1 turn coil

5500A/coil

Tie Aux Com and

Normal Com together

using heavy gauge

wire or bus bar.

akp03f.eps

Figure 3. Phase Check Setup

mV Output Test

1. Connect the equipment as shown in Figure 5.

2. Set the calibrator output and coil for each step of Table 5.

3. Verify that the voltmeter reading is within the “i1000S mV Output” limits of Table 5.

Altri manuali per i1000s

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fluke Strumento di misura

Fluke

Fluke BT521 Manuale utente

Fluke

Fluke 1630 Manuale per l'uso e la cura

Fluke

Fluke CableAnalyzer DSP-4000 Series Manuale utente

Fluke

Fluke ASM-990 Series Manuale di istruzioni

Fluke

Fluke ScopeMeter 190-102 Manuale utente

Fluke

Fluke 772 Manuale utente

Fluke

Fluke 095969674225 Manuale utente

Fluke

Fluke DSX-600 CableAnalyzer Manuale utente

Fluke

Fluke WaveRunner Manuale utente

Fluke

Fluke 893A Manuale utente

Fluke

Fluke OptiView III Series Manuale utente

Fluke

Fluke DTX-1800 Manuale per l'uso e la cura

Fluke

Fluke 301A Manuale utente

Fluke

Fluke 971 Manuale utente

Fluke

Fluke 353 Manuale utente

Fluke

Fluke DTX-1800 Manuale per l'uso e la cura

Fluke

Fluke 323 Manuale utente

Fluke

Fluke 373 Manuale di istruzioni

Fluke

Fluke 35040 Operators Manuale utente

Fluke

Fluke 374 Manuale utente

Fluke

Fluke RUSKA 2456-LEM Manuale utente

Fluke

Fluke 189 Manuale utente

Fluke

Fluke 360 Manuale utente

Fluke

Fluke VR101 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente

Fluke i1000s Guida alla configurazione

Manuali Strumento di misura popolari di altre marche