Freescale Semiconductor I.MX27 PDK 1.0 Manuale utente

i.MX27 PDK 1.0

Windows Embedded CE 6.0

Quick Start Guide

3StackQS_WinCE.book Page 1 Friday, November 21, 2008 11:46 AM

Information in this document is provided solely to enable system and software implementers to use Freescale Semicon-

ductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any inte-

grated circuits or integrated circuits based on the information in this document.

Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale

Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any partic-

ular purpose,nor does Freescale Semiconductor assume any liability arising out of the application or use of any product

or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental dam-

ages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and

do vary in different applications and actual performance may vary over time. All operating parameters, including “Typ-

icals”, must bevalidated for each customer application by customer’s technical experts. Freescale Semiconductor does

not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not de-

signed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other

applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semi-

conductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use

FreescaleSemiconductor products forany such unintendedor unauthorizedapplication, Buyer shall indemnify and hold

Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of

personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale

Semiconductor was negligent regarding the design or manufacture of the part.

Federal Communications Commission Radio Frequency Interference Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that might cause undesired operation.

Changes or modifications to this equipment not expressly approved by Freescale could void the user’s authority to op-

erate the equipment.

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names

are the property of their respective owners. Microsoft and Windows are registered trademarks ofMicrosoft Corporation.

RealView is a registered trademark of ARM Limited. ARM9 is the trademark of ARM Limited. The ARM logo is a

registered trademark of ARM Ltd.Wi-Fi is aregisteredtrademark ofthe Wi-Fi Alliance.Bluetoothis a registered trade-

mark of the Bluetooth SIG, Inc., and is used under license. Wi-Fi CERTIFIED is a trademark of the Wi-Fi Alliance.

How to Reach Us:

Home Page:

www.freescale.com

E-mail:

support@freescale.com

USA/Europe or Locations Not Listed:

Freescale Semiconductor

Technical Information Center, CH370

1300 N. Alma School Road

Chandler, Arizona 85224

+1-800-521-6274 or +1-480-768-2130

support@freescale.com

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH

Technical Information Center

Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English)

+46 8 52200080 (English)

+49 89 92103 559 (German)

+33 1 69 35 48 48 (French)

support@freescale.com

Japan:

Freescale Semiconductor Japan Ltd.

Headquarters

ARCO Tower 15F

1-8-1, Shimo-Meguro, Meguro-ku,

Tokyo 153-0064, Japan

0120 191014 or +81 3 5437 9125

support.japan@freescale.com

Asia/Pacific:

Freescale Semiconductor China Ltd.

Exchange Building 23F

No. 118 Jianguo Road

Chaoyang District

Beijing 100022

China

+86 010 5879 8000

support.asia@freescale.com

For Literature Requests Only:

Freescale Semiconductor Literature Distribution

Center

P.O. Box 5405

Denver, Colorado 80217

1-800-521-6274 or 303-675-2140

Fax: 303-675-2150

LDCForFreescaleSemiconductor@hibbertgroup.com

3StackQS_WinCE.book Page 2 Friday, November 21, 2008 11:46 AM

i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

1 About the Boards 3

About the 3-Stack Platform System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

CPU Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Debug Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Personality Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2 Getting Started 13

Unpack the Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

CD-ROM Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Provide a Development PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3 Build the Platform 17

Build a Development Platform: Assemble Three Boards. . . . . . . . . . . . . . . . . . 17

Connect Personality Board to Debug Board. . . . . . . . . . . . . . . . . . . . . . . . .18

Connect CPU Board to Debug Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Connect Development Platform to PC; Run Preloaded Image. . . . . . . . . . . 20

Build a Demo Platform: Assemble Two Boards. . . . . . . . . . . . . . . . . . . . . . . . .21

Connect CPU Board to Personality Board . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connect Power Supply; Run Preloaded Demo . . . . . . . . . . . . . . . . . . . . . .23

4 Using the Demo Image 25

Touch Pad Calibration Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Downloading Multimedia to the 3-Stack Board. . . . . . . . . . . . . . . . . . . . . . . . . 27

Using Active Sync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Using an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Using a USB Memory Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Running the Demo Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Running the TV-Out Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Changing the Windows Embedded CE 6.0 Demo Image Version . . . . . . . . 42

Ready to Begin Your Development? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3StackQS_WinCE.book Page 1 Friday, November 21, 2008 11:46 AM

i.MX27 PDK 1.0 Quick Start Guide

3StackQS_WinCE.book Page 2 Friday, November 21, 2008 11:46 AM

i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

About the Boards

This chapter provides detailed information about the three boards (CPU, Debug,

Personality) and the locations of the connectors and switches for each.

CAUTION Your PDK arrives housed in a plastic device enclosure, which under

normal circumstances you should not remove. However, the PDK

documentation set includes information for board-level components, and

also explains in some documents how to assemble the boards into the

enclosure. Should you need to work directly with the boards, please use

great caution in handling the components:

– To remove or work with the boards, use static precautions.

– To remove or add the enclosure, first read the enclosure assembly instructions

carefully and note which areas are delicate, such as the speakers.

About the 3-Stack Platform System

Freescale introduces the 3-Stack Platform System, which you use to develop multimedia

and connectivity applications using the i.MX27 Applications Processor and the MC13783

Audio and Power Management device.

The 3-Stack Platform System decreases the time between first development and final

product release by providing you (as the system designer) with a near-to-final product

design, which you can use as a development platform for software and hardware.

There are two Board Support Packages (BSP) for the 3-Stack Platform System, with one

BSP for Windows Embedded CE™ 6.0, and one BSP for Linux operating systems. These

BSPs contain drivers optimized for multimedia operations using the i.MX27 and

MC13783 devices.

Freescale's 3-Stack Platform System consists of three small boards: CPU, Debug, and

Personality.

• A CPU board contains the i.MX27 CPU, memories, and the MC13783 Power

Management IC (PMIC).

• A Debug board provides the debug interfaces (such as JTAG), and also has a CPLD

that implements an external Ethernet and serial controller for debug purposes.

• The Personality board implements the functionality of the 3-Stack board, and

contains hardware for Wi-Fi connectivity, FM receiver, and so on. The Personality

board can be modified to meet your specific requirements without the need to modify

the other two boards (CPU, Debug). The Personality board was designed to support

3StackQS_WinCE.book Page 3 Friday, November 21, 2008 11:46 AM

About the Boards

About the 3-Stack Platform System

4i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

common multimedia applications, and has a 2.8-inch VGA display, image sensor

camera, Wi-Fi CERTIFIED™ IEEE 802.11™ b/g standards, FM receiver, SD Card

connector, USB OTG, USB Host, 2.4 QVGA smart display panel connector, ATA

connector and TV-Out connector. As the 3-Stack platform continues to evolve, more

Personality boards will be created to meet new multimedia requirements. Table 1.1

lists 3-Stack platform features in more detail.

Table 1.1 3-Stack Platform Features

Details

All boards • Near to final product form-factor demonstration

modules and working platforms.

• Solid reference schematics that closely resemble

final products to aid customers' designs.

CPU board • i.MX27 ARM9™Applications Processor

• MC13783 Atlas power management chip

• 256 MB of NAND Flash Memory

• 128 MB of 32 bit DDR SDRAM memory

• 37.914 mm x 67.517 mm

Personality board • Peripheral components

• Interface connectors

• 71.428 mm x 129.462 mm

Debug board • Two RS-232 interfaces

• 10/100 Base-T Ethernet connector

• Current measure connectors

• 71.400 mm x 174.900 mm

Expansion Headers • Utilizing reliable high density connector to interface

between boards, 3 board assembly for software

development and 2-board assembly (without debug

board) for demonstration

Battery Support • +4.2 V 2400mAh Battery power supply and Battery

Charging Function

LCD Display • 2.8 inch TFTLCD display panel with touch panel and

LED backlight

Smart LCD Connector • 2.4 inch QVGA smart display panel connector

Camera Interface • Image sensor camera connector

Selectable Clock

Sources

• Two selectable system clock sources: 32.768 KHz

and 26 Mhz

3StackQS_WinCE.book Page 4 Friday, November 21, 2008 11:46 AM

About the Boards

About the 3-Stack Platform System

i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

Debug Port •RealView

®-ICE debug support

Video and Audio

Stereo

• Stereo microphone jack, headphone and video jack,

stereo and mono (ear piece) speaker terminals

GPS Connector • One connector to outboard GPS module

FM Receiver

TV Out • TV decoder that supports 8-bit color, NTSC and PAL

formats

PC Card Expansion • SD card connectors, with card sense

Keypad • Onboard keypad and keypad connector

Network Support • Onboard Wi-Fi CERTIFIED™ IEEE 802.11 b/g

standards and Bluetooth(r) Core Specification

Version 2.0 + EDR (enhanced data rate)

combination module

• One Ethernet jack connector (for application/debug)

USB • One USB OTG high-speed transceiver with mini-

USB connector

• One USB high-speed host transceiver, with

standard USB host connector

ATA Support ATA5 controller with

• One 44-position dual row 2 mm header for small

form-factor disk drivers

• One 40-pin ZIF connector for Toshiba HDD

Accelerometer • Onboard accelerometer with sensitivity in three

separate axes (X, Y, Z)

Serial Port Two RS-232 interfaces with DB-9 connectors

• One RS-232 interface is driven by a UART channel

internal to the MX27, and it supports DCE with

optional full modem controls

• The other RS-232 interface is DTE with optional full

modem controls

Table 1.1 3-Stack Platform Features

Details

3StackQS_WinCE.book Page 5 Friday, November 21, 2008 11:46 AM

About the Boards

About the 3-Stack Platform System

6i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

Cables • 5.0V/2.4A universal power supply kit

• RS-232 standard serial cable

• High Speed USB cables with mini-AB connectors for

OTG

• High speed cable with standard A-to-mini-B

connectors

• Mini-USB adaptor

• Jack to RCA audio/video cable

• Ethernet cables (2) with RJ45-8 connectors

Software • Sample Windows® embedded CE binary image

from Freescale

• Windows embedded CE BSP available from

Freescale

Application

Development Tools

• ATK software

• Platform Builder 6.0

• Visual Studio 2005

Table 1.1 3-Stack Platform Features

Details

3StackQS_WinCE.book Page 6 Friday, November 21, 2008 11:46 AM

About the Boards

CPU Board

i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

CPU Board

Figure 1.1 CPU Board

You use the J1 board-to-board connector (500 pins) to connect the CPU board to either of

the other two boards:

• Connect the CPU board to a Personality board, for running demos (no Debug board

is needed).

• Connect the CPU board to a Debug board, (and connect the Personality board to the

Debug board) for developing software. The Personality board plugs into the other

side of the Debug board.

J1 Board-to-Board Connector

CPU

Board Top

Bottom

3StackQS_WinCE.book Page 7 Friday, November 21, 2008 11:46 AM

About the Boards

Debug Board

8i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0

Debug Board

Figure 1.2 Debug Board

To Personality Board

Connector CN74

Current Measure J3

MX27 JTAG CN1

SW5–SW10 See Table 1.4

3.3V LED D9

Power-On S4

DC Power LED D11

DC Power J2

Ethernet J1

UART CON4

female

UART CON3

male

Device MAC

Address

Personality

CPLD JTAG

CN3

CPLD Test BT

Debug Reset S2

CPLD Test BT

Power S1

System Reset S3

CPLD LEDs D1–

SW4 See Table 1.3

Debug

Board

TOP

Bottom

Resettable Fuse F1

To CPU Board Connector

Debug CPLD JTAG CN2

Address

MAC

Device

3StackQS_WinCE.book Page 8 Friday, November 21, 2008 11:46 AM

Indice

Altri manuali Freescale Semiconductor Hardware per computer

Freescale Semiconductor

Freescale Semiconductor MSC8144ADS Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-K60D100M Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-K64F120M Manuale utente

Freescale Semiconductor

Freescale Semiconductor NXP CodeWarrior USB TAP Manuale utente

Freescale Semiconductor

Freescale Semiconductor MPC8349E PowerQUICC II Pro Manuale utente

Freescale Semiconductor

Freescale Semiconductor MPC8349EA MDS Manuale utente

Freescale Semiconductor

Freescale Semiconductor MTRCKTSPS5604P Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-MCF51QM Manuale utente

Freescale Semiconductor

Freescale Semiconductor KW2xDxxx Manuale utente

Freescale Semiconductor

Freescale Semiconductor EVBCRTOUCH Manuale utente

Freescale Semiconductor

Freescale Semiconductor MPC8349EA PowerQUICC II Pro Manuale utente

Freescale Semiconductor

Freescale Semiconductor i.MX53 SABRE Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-WIFI-G1011MI Manuale utente

Freescale Semiconductor

Freescale Semiconductor MPC8272ADS Manuale utente

Freescale Semiconductor

Freescale Semiconductor i.MX 6Solo Manuale utente

Freescale Semiconductor

Freescale Semiconductor M68HC08 series Manuale utente

Freescale Semiconductor

Freescale Semiconductor MC9S08PT60 Manuale utente

Freescale Semiconductor

Freescale Semiconductor PowerPC MPC823 Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-LS1021A Manuale utente

Freescale Semiconductor

Freescale Semiconductor MSC8144E Manuale utente

Freescale Semiconductor

Freescale Semiconductor NXP 56F8014 Manuale utente

Freescale Semiconductor

Freescale Semiconductor MPC8260 PowerQUICC II Family Manuale utente

Freescale Semiconductor

Freescale Semiconductor i.MX35 Manuale utente

Freescale Semiconductor

Freescale Semiconductor MPC8349E PowerQUICC II Pro Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

Freescale Semiconductor i.MX27 PDK 1.0 Manuale utente

Manuali Hardware per computer popolari di altre marche