Freescale Semiconductor MPC8272ADS Manuale utente

MPC8272ADSUG

3/2004

Rev. 0.1

MPC8272ADS

User Guid

This datasheet has been downloaded fromhttp://www.digchip.com at this page

Home Page:

www.freescale.com

email:

[email protected]

USA/Europe or Locations Not Listed:

Freescale Semiconductor

Technical Information Center, CH370

1300 N. Alma School Road

Chandler, Arizona 85224

(800) 521-6274

480-768-2130

[email protected]

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH

Technical Information Center

Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English)

+46 8 52200080 (English)

+49 89 92103 559 (German)

+33 1 69 35 48 48 (French)

[email protected]

Japan:

Freescale Semiconductor Japan Ltd.

Headquarters

ARCO Tower 15F

1-8-1, Shimo-Meguro, Meguro-ku

Tokyo 153-0064, Japan

0120 191014

+81 2666 8080

[email protected]

Asia/Pacific:

Freescale Semiconductor Hong Kong Ltd.

Technical Information Center

2 Dai King Street

Tai Po Industrial Estate,

Tai Po, N.T., Hong Kong

+800 2666 8080

[email protected]

For Literature Requests Only:

Freescale Semiconductor

Literature Distribution Center

P.O. Box 5405

Denver, Colorado 80217

(800) 441-2447

303-675-2140

Fax: 303-675-2150

LDCForFreescaleSemiconductor

@hibbertgroup.com

Information in this document is provided solely to enable system and software

implementers to use Freescale Semiconductor products. There are no express or

implied copyright licenses granted hereunder to design or fabricate any integrated

circuits or integrated circuits based on the information in this document.

Freescale Semiconductor reserves the right to make changes without further notice to

any products herein. Freescale Semiconductor makes no warranty, representation or

guarantee regarding the suitability of its products for any particular purpose, nor does

Freescale Semiconductor assume any liability arising out of the application or use of

any product or circuit, and specifically disclaims any and all liability, including without

limitation consequential or incidental damages. “Typical” parameters which may be

provided in Freescale Semiconductor data sheets and/or specifications can and do

vary in different applications and actual performance may vary over time. All operating

parameters, including “Typicals” must be validated for each customer application by

customer’s technical experts. Freescale Semiconductor does not convey any license

under its patent rights nor the rights of others. Freescale Semiconductor products are

not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life,

or for any other application in which the failure of the Freescale Semiconductor product

could create a situation where personal injury or death may occur. Should Buyer

purchase or use Freescale Semiconductor products for any such unintended or

unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of,

directly or indirectly, any claim of personal injury or death associated with such

unintended or unauthorized use, even if such claim alleges that Freescale

Semiconductor was negligent regarding the design or manufacture of the part.

Contents

Section

Number Title Page

Number

Contents ii

Contents

Paragraph

Number Title Page

Number

Contents

About This Book

Chapter 1

Overview

1.1 MPC8272ADS Specifications ............................................................................. 1-1

1.2 MPC8272ADS Features ...................................................................................... 1-2

Chapter 2

Hardware Preparation and Installation

2.1 Unpacking Instructions........................................................................................ 2-1

2.2 Hardware Preparation .......................................................................................... 2-1

2.2.1 Setting the VDDL Supply Voltage Level........................................................... 2-3

2.2.2 Setting MODCK(1:3) for PLLs Multiplication Factor—SW5 (#6–#8) .......... 2-3

2.2.3 Setting Hard Reset Configuration Source—JP9.............................................. 2-4

2.2.4 Setting Boot Source......................................................................................... 2-5

2.2.5 Setting MODCKH(0:3) for PLL Multiplication Factors................................. 2-6

2.2.6 Setting PCI_ARBITER for PCI Mode-Enabled.............................................. 2-6

2.2.7 Setting PCI_DLL for PCI Mode-Enabled ....................................................... 2-6

2.2.8 Clock-In Source Selection ............................................................................... 2-7

2.2.9 FCC1 Ethernet Port Mode—MII/RMII...........................................................2-7

2.2.10 FCC2 Ethernet Port Mode—MII/RMII...........................................................2-8

2.2.11 USB Speed Selection....................................................................................... 2-8

2.2.12 USB Mode Selection ....................................................................................... 2-8

2.2.13 COP/JTAG Connection.................................................................................... 2-9

2.2.14 Forced Parallel Port Connection...................................................................... 2-9

2.2.15 Power On/Off Switch....................................................................................... 2-9

Chapter 3

Installation Instructions

Contents

Paragraph

Number Title Page

Number

MPC8272ADS User Guide

3.1 Installation Instructions........................................................................................ 3-1

3.1.1 Host-Controlled Operation .............................................................................. 3-1

3.1.2 Stand Alone Operation..................................................................................... 3-2

3.1.3 COP/JTAG Connector—P21...........................................................................3-3

3.1.4 Terminal to MPC8272ADS RS-232 Connection.............................................3-3

3.1.5 10/100-Base-T Ethernet Ports Connection......................................................3-4

3.1.6 Memory Installation......................................................................................... 3-4

3.1.6.1 Flash Memory SIMM Installation............................................................... 3-4

Chapter 4

Operating Instructions

4.1 Controls and Indicators........................................................................................4-1

4.1.1 Power-On RESET Switch—SW3.................................................................... 4-1

4.1.2 ABORT Switch—SW6.................................................................................... 4-1

4.1.3 Soft Reset Switch—SW7................................................................................. 4-1

4.1.4 Hard Reset Switches—SW6 & SW7...............................................................4-1

4.1.5 Reset Configuration Switch—SW2.................................................................4-2

4.1.6 Software Options Switch—SW1.....................................................................4-2

4.1.7 3IDDL Measurement—JP1 ............................................................................. 4-2

4.1.8 Thermal Sense Connector—JP7...................................................................... 4-2

4.1.9 IDDH Measurement—JP14............................................................................. 4-3

4.1.10 VPP Source Selector—JP4............................................................................... 4-3

4.1.11 GND Bridges ................................................................................................... 4-4

4.1.12 Power O.K. Indicator—LD13.......................................................................... 4-4

4.1.13 12V Indicator—LD14...................................................................................... 4-4

4.1.14 UTOPIA Multi PHY Indicator—LD28........................................................... 4-4

4.1.15 5-V Indicator—LD15 ...................................................................................... 4-4

4.1.16 3.3-V Indicator—LD16 ................................................................................... 4-4

4.1.17 USB Power Indicator—LD5............................................................................ 4-4

4.1.18 -12V Indicator—LD17 .................................................................................... 4-4

4.1.19 RUN Indicator—LD18 .................................................................................... 4-5

4.1.20 ATM ON Indicator—LD19 ............................................................................. 4-5

4.1.21 Fast Ethernet Port 1 Enabled—LD20.............................................................. 4-5

4.1.22 Fast Ethernet Port 2 Enabled—LD22.............................................................. 4-5

4.1.23 RS232 Port 1 ON—LD23................................................................................ 4-5

4.1.24 Fast Ethernet Port 1 Full Duplex Indicator—LD1........................................... 4-5

4.1.25 RS232 Port 2 ON—LD24................................................................................ 4-5

4.1.26 Fast Ethernet Port 1 100Base-Tx Indicator—LD2..........................................4-6

4.1.27 Ethernet Port 1 Tx/Rx Indicator—LD3........................................................... 4-6

4.1.28 General Purpose Led 2 Indicator—LD26........................................................4-6

4.1.29 Ethernet Port 1 LINK Indicator—LD4............................................................ 4-6

Contents

Paragraph

Number Title Page

Number

Contents v

4.1.30 Fast Ethernet Port 2 Full Duplex Indicator—LD6........................................... 4-6

4.1.31 General Purpose Led 1 Indicator—LD25........................................................4-6

4.1.32 Fast Ethernet Port 2 100Base-Tx Indicator—LD7..........................................4-6

4.1.33 USB Enabled Indicator—LD21.......................................................................4-6

4.1.34 Ethernet Port 2 LINK Indicator—LD9............................................................ 4-7

4.1.35 Ethernet Port 2 Tx/Rx Indicator—LD8........................................................... 4-7

4.1.36 VDDL Indication—LD27 ................................................................................. 4-7

4.1.37 Parallel Port connection—LD10...................................................................... 4-7

4.1.38 External Debugger Connection Indicator—LD11........................................... 4-7

Chapter 5

Module Design

5.1 Reset and Reset Configuration ............................................................................ 5-1

5.1.1 Power-On Reset ............................................................................................... 5-1

5.1.2 Power-On Reset Configuration........................................................................ 5-1

5.1.3 Hard Reset........................................................................................................ 5-2

5.1.3.1 COP/JTAG Port Hard Reset ........................................................................5-2

5.1.3.2 Manual Hard Reset ...................................................................................... 5-3

5.1.3.3 Internal Sources Hard Reset ........................................................................ 5-3

5.1.3.4 Hard Reset Configuration............................................................................ 5-3

5.1.4 Soft Reset......................................................................................................... 5-7

5.1.4.1 COP/JTAG Port Soft Reset.......................................................................... 5-8

5.1.4.2 Manual Soft Reset........................................................................................ 5-8

5.1.4.3 Internal Sources Soft Reset.......................................................................... 5-8

5.1.5 PCI Bus Reset..................................................................................................5-8

5.1.6 Local Interrupter .............................................................................................. 5-9

5.1.6.1 ABORT Interrupt......................................................................................... 5-9

5.1.6.2 ATM UNI Interrupt......................................................................................5-9

5.1.7 Fast Ethernet PHY Interrupt............................................................................5-9

5.1.8 PCI Interrupt.................................................................................................... 5-9

5.2 Clock Generator................................................................................................. 5-13

5.2.1 MPC8272 Clock ............................................................................................ 5-13

5.2.2 PCI Clock....................................................................................................... 5-13

5.3 Bus Configuration.............................................................................................. 5-14

5.3.1 Single PowerQUICC II Mode........................................................................ 5-14

5.4 Buffering............................................................................................................ 5-14

5.5 Chip-Select Generator........................................................................................ 5-15

5.6 Synchronous DRAM (60X Bus)........................................................................5-15

5.6.1 SDRAM Programming .................................................................................. 5-16

5.6.2 SDRAM Refresh............................................................................................ 5-17

5.7 Flash Memory SIMM ........................................................................................5-17

Contents

MPC8272ADS User Guide

5.7.1 Flash Programming Voltage........................................................................... 5-19

5.8 E2PROM Memory............................................................................................. 5-19

5.9 PCI Bus.............................................................................................................. 5-20

5.10 Communication Ports ........................................................................................ 5-22

5.10.1 ATM Port ....................................................................................................... 5-22

5.10.2 100/10 Base T Ports.......................................................................................5-23

5.10.2.1 DM9161 Control........................................................................................ 5-23

5.10.3 RS232 Ports ................................................................................................... 5-24

5.10.3.1 RS-232 Ports’ Signal Description.............................................................. 5-24

5.10.4 USB Port........................................................................................................ 5-25

5.10.5 PC Parallel Port.............................................................................................. 5-25

5.11 Board Control and Status Register - BCSR.......................................................5-25

5.11.1 BCSR0 Board Control—Status Register 0.................................................... 5-27

5.11.2 BCSR1 Board Control—Status Register 1.................................................... 5-27

5.11.3 BCSR2 Board Control—Status Register 2.................................................... 5-28

5.11.4 BCSR3 Board Control - Status Register 3..................................................... 5-31

5.11.5 BCSR4 Board Control—Status Register 4.................................................... 5-32

5.11.6 BCSR5 and BCSR7 Board Control—Status Register 3 and 5 ...................... 5-33

5.12 COP/JTAG Port ................................................................................................. 5-33

Chapter 6

Memory Map

6.1 Overview.............................................................................................................. 6-1

6.2 PowerQUICC II Register Programming.............................................................. 6-5

6.2.1 System Initialization ........................................................................................ 6-6

6.2.2 Memory Controller Register Programming..................................................... 6-7

Chapter 7

Physical Properties

7.1 Power Supply....................................................................................................... 7-1

7.1.1 5-V Rail............................................................................................................ 7-3

7.1.2 3.3-V Rail......................................................................................................... 7-3

7.1.3 5-V Standby Rail ............................................................................................. 7-3

7.1.4 VDDH Rail........................................................................................................ 7-3

7.1.4.1 VDDL Bus..................................................................................................... 7-3

7.1.4.2 12-V Rail ..................................................................................................... 7-4

7.1.4.3 -12-V Rail.................................................................................................... 7-4

7.2 Connectors ........................................................................................................... 7-4

7.2.1 ATX Power Connector..................................................................................... 7-4

7.2.2 Fast Ethernet Port Connectors .........................................................................7-4

Contents

Paragraph

Number Title Page

Number

Contents vi

7.2.3 ATM 155 Port Connection...............................................................................7-5

7.2.4 RS232 Port Connector..................................................................................... 7-5

7.2.5 CPM Expansion Connector ............................................................................. 7-5

7.2.6 COP/JTAG Port Connector.............................................................................. 7-5

7.2.7 Logic Analyzer Connectors............................................................................. 7-5

7.2.8 Mach’s In System Programming (ISP) Connector .......................................... 7-5

7.2.9 PCI Connectors................................................................................................ 7-5

7.2.10 System Expansion Connector..........................................................................7-6

7.2.11 USB Connector................................................................................................ 7-6

7.2.12 Parallel Port Connector.................................................................................... 7-6

7.3 PCB Layout.......................................................................................................... 7-6

Chapter 8

Support

8.1 Interconnect Signals............................................................................................. 8-1

8.1.1 P13—RS232 Ports 1 and 2 Connectors........................................................... 8-1

8.1.2 P10 and P23 100/10 Base-T Ethernet Port Connector..................................... 8-2

8.1.3 P21—COP/JTAG Connector...........................................................................8-2

8.1.4 P1—CPM Expansion Connector.....................................................................8-4

8.1.5 P9, P11, P14, P22, P17, P5, P20, P18, P15, P24,P12

Logic Analyzer MICTOR Connectors....................................................... 8-13

8.1.6 P26, P28, P29—PCI Connectors ................................................................... 8-13

8.1.7 P31 - ATX Power Supply Connector............................................................. 8-15

8.1.8 P3,P4,P25—Mach/Lattice ISP Connector..................................................... 8-16

8.1.9 P2—System Expansion Connector................................................................8-17

8.1.10 P16, P19—USB Connectors.......................................................................... 8-22

8.2 Programmable Logic Equations......................................................................... 8-23

8.2.1 U3—BCSR Code........................................................................................... 8-23

8.2.2 U41—Power switch debounce....................................................................... 8-53

Appendix A

Revision History

Index

Contents

Paragraph

Number Title Page

Number

MPC8272ADS User Guide

Figures

Figure

Number Title Page

Number

Figures ix

Figures

1-1 MPC8272ADS Block Diagram................................................................................... 1-4

2-1 MPC8272ADS Top Side Part Location Diagram ....................................................... 2-2

2-2 VDDL Trimmer—RP1 ................................................................................................. 2-3

2-3 SW5 Description......................................................................................................... 2-4

2-4 Hard Reset Configuration Source Selection—JP9...................................................... 2-5

2-5 SW2 Description......................................................................................................... 2-6

2-6 Clock Source Selection............................................................................................... 2-7

2-7 FCC1 Ethernet Mode Selection ..................................................................................2-7

2-8 FCC2 Ethernet Mode Selection ..................................................................................2-8

2-9 USB Mode Selection................................................................................................... 2-9

2-10 Forced Parallel Port Connection ................................................................................. 2-9

3-1 Host-Controlled Operation Scheme—Command Converter ...................................... 3-1

3-2 Host Controlled Operation Scheme—Parallel Port .................................................... 3-2

3-3 Stand Alone Configuration ......................................................................................... 3-2

3-4 P21—COP/JTAG Port Connector............................................................................... 3-3

3-5 P1A/P1B—RS232 Serial Port Connector................................................................... 3-3

3-6 Flash Memory SIMM Insertion ..................................................................................3-4

4-1 SW1 Description......................................................................................................... 4-2

4-2 JP7 Therm Connector.................................................................................................. 4-3

4-3 JP13 VPP Source Selection ......................................................................................... 4-3

5-1 PCI Host Configuration Registers............................................................................... 5-7

5-2 PCI Interrupt Routing Scheme.................................................................................. 5-10

5-3 Main Clock Generator Scheme................................................................................. 5-13

5-4 PCI Clock Generator Scheme ................................................................................... 5-14

5-5 60x SDRAM Connection Scheme ............................................................................5-16

5-6 FLASH SIMM Connection Scheme.........................................................................5-18

5-7 E2PROM Connection Scheme..................................................................................5-20

5-8 PCI Bus Scheme........................................................................................................ 5-21

5-9 RS232 Serial Ports Connector................................................................................... 5-24

5-10 Debug Station Connection Schemes......................................................................... 5-33

5-11 COP/JTAG Port Connector....................................................................................... 5-34

7-1 MPC8272ADS Power Scheme ................................................................................... 7-2

Figures

MPC8272ADS User Guide

Indice

Altri manuali Freescale Semiconductor Hardware per computer

Freescale Semiconductor

Freescale Semiconductor MED-EKG Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-K64F120M Manuale utente

Freescale Semiconductor

Freescale Semiconductor MSC8144ADS Manuale utente

Freescale Semiconductor

Freescale Semiconductor Motorola MMDS0508 Manuale utente

Freescale Semiconductor

Freescale Semiconductor MC9S08PT60 Manuale utente

Freescale Semiconductor

Freescale Semiconductor MPC8260 PowerQUICC II Family Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-S12G64 Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-K60N512 Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-LS1021A Manuale utente

Freescale Semiconductor

Freescale Semiconductor MSC8144E Manuale utente

Freescale Semiconductor

Freescale Semiconductor MC68HC08KH12 Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-WIFI-G1011MI Manuale utente

Freescale Semiconductor

Freescale Semiconductor metrowerks CodeWarrior Manuale utente

Freescale Semiconductor

Freescale Semiconductor KW2xDxxx Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-S12GN32 Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-MCF51QM Manuale utente

Freescale Semiconductor

Freescale Semiconductor e200z3 Manuale utente

Freescale Semiconductor

Freescale Semiconductor FRDM-K64F Manuale utente

Freescale Semiconductor

Freescale Semiconductor FRDM-STBC-SA9500 Guida di riferimento

Freescale Semiconductor

Freescale Semiconductor M68HC08 series Manuale utente

Freescale Semiconductor

Freescale Semiconductor PowerQUICC III Istruzioni per l'installazione e il funzionamento

Freescale Semiconductor

Freescale Semiconductor TWR-K60D100M Manuale utente

Freescale Semiconductor

Freescale Semiconductor Demonstration Board DEMO9S08AC60E Manuale utente

Freescale Semiconductor

Freescale Semiconductor USB-KW24D512 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente