Freescale Semiconductor PE Micro Cyclone Pro Manuale utente
Purchase Agreement
P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to any products herein to
improve reliability, function, or design. P&E Microcomputer Systems, Inc. does not assume any liability arising out of
the application or use of any product or circuit described herein.
This software and accompanying documentation are protected by United States Copyright law and also by
International Treaty provisions. Any use of this software in violation of copyright law or the terms of this agreement will
be prosecuted.
All the software described in this document is copyrighted by P&E Microcomputer Systems, Inc. Copyright notices
have been included in the software.
P&E Microcomputer Systems authorizes you to make archival copies of the software and documentation for the sole
purpose of back-up and protecting your investment from loss. Under no circumstances may you copy this software or
documentation for the purpose of distribution to others. Under no conditions may you remove the copyright notices
from this software or documentation.
This software may be used by one person on as many computers as that person uses, provided that the software is
never used on two computers at the same time. P&E expects that group programming projects making use of this
software will purchase a copy of the software and documentation for each user in the group. Contact P&E for volume
discounts and site licensing agreements.
P&E Microcomputer Systems does not assume any liability for the use of this software beyond the original purchase
price of the software. In no event will P&E Microcomputer Systems be liable for additional damages, including any
lost profits, lost savings or other incidental or consequential damages arising out of the use or inability to use these
programs, even if P&E Microcomputer Systems has been advised of the possibility of such damage.
By using this software, you accept the terms of this agreement.
©2011 P&E Microcomputer Systems, Inc.
MS-DOS & Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of IBM
corporation.
Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service
names are the property of their respective owners.
P&E Microcomputer Systems, Inc.
98 Galen St.
Watertown, MA 02472
617-923-0053
http://www.pemicro.com
CYCLONEPROUM
Manual version 1.13
January 2011
Cyclone PRO User Manual i
CYCLONE PRO
1 INTRODUCTION ............................................................................................ 1
2 QUICK START GUIDE FOR SAP OPERATION ............................................ 5
3 CYCLONE PRO HARDWARE........................................................................ 8
3.1 Cyclone PRO Power Supply .......................................................................... 8
3.2 RS232 Communication .................................................................................. 8
3.3 Ethernet Communication................................................................................ 9
3.4 USB Communications .................................................................................... 9
3.5 Electromechanical Relays ............................................................................ 10
3.6 Power Connectors........................................................................................ 11
3.7 Jumper Settings ........................................................................................... 11
3.8 Optional Oscillator (MON08 Only)................................................................ 12
3.9 Target BDM Connector ................................................................................ 12
3.10 Target MON08 Connector ............................................................................ 13
3.11 Ribbon Cable................................................................................................ 15
3.12 Target Power Management.......................................................................... 15
3.13 CompactFlash Port....................................................................................... 21
4 CYCLONE LCD MENU................................................................................. 23
4.1 Status Window ............................................................................................. 24
4.2 Main Menu.................................................................................................... 25
5 STAND-ALONE PROGRAMMER CONFIGURATION.................................. 31
5.1 Create A Stand-Alone Programming (SAP) Image ...................................... 31
5.2 Manage Multiple SAP Images ...................................................................... 45
6 STAND-ALONE PROGRAMMER MANUAL CONTROL .............................. 48
6.1 Operation Via Cyclone PRO Buttons ........................................................... 48
6.2 Operation Via LCD Menu (Rev. C Only) ...................................................... 50
6.3 Cyclone Battery Pack ................................................................................... 54
7 STAND-ALONE PROGRAMMER AUTOMATED CONTROL....................... 55
7.1 Cyclone Automated Control Package - Overview ........................................ 55
7.2 Cyclone Automated Control Package - Details ............................................ 56
8 PC-HOSTED DEBUG/PROGRAMMING SOFTWARE................................. 58
ii Cyclone PRO User Manual
CYCLONE PRO
8.1 P&E Microcomputer Systems Software........................................................58
8.2 Freescale Software .......................................................................................61
8.3 HC08 P&E Multilink/Cyclone PRO Connections...........................................65
8.4 HCS08 P&E Multilink/Cyclone PRO Connections ........................................84
9 ETHERNET CONFIGURATION ................................................................... 92
9.1 Network Architectures...................................................................................92
9.2 Network Parameters .....................................................................................93
9.3 Internet Protocol ...........................................................................................94
9.4 Connecting The Cyclone Device ..................................................................94
9.5 Cyclone IP Setup Via LCD Menu..................................................................96
9.6 Cyclone IP Setup Utility User Interface (ConfigureIP) ..................................96
9.7 Using ConfigureIP.exe To Configure The Cyclone PRO ..............................98
10 SERIAL PORT CONFIGURATION............................................................. 101
11 USB PORT CONFIGURATION .................................................................. 102
12 AUTOMATIC SERIAL NUMBER MECHANISM ......................................... 103
12.1 Understanding Serialization........................................................................103
12.2 Serialize Utility ............................................................................................104
12.3 Serialize Utility Example .............................................................................107
12.4 Using Serial Number File............................................................................107
12.5 Serial Number Handling in Cyclone PRO ...................................................108
13 TARGET MON08 HEADER PINOUTS....................................................... 110
13.1 68HC908AB................................................................................................110
13.2 68HC908AP................................................................................................111
13.3 68HC908AS................................................................................................112
13.4 68HC908AT ................................................................................................113
13.5 68HC908AZ ................................................................................................114
13.6 68HC908BD................................................................................................115
13.7 68HC908EY................................................................................................116
13.8 68HC908GP ...............................................................................................117
13.9 68HC908GR16/32 ......................................................................................118
13.10 68HC908GR4/8 ..........................................................................................119
Cyclone PRO User Manual iii
CYCLONE PRO
13.11 68HC908GT ............................................................................................... 120
13.12 68HC908GZ ............................................................................................... 121
13.13 68HC908JB1/8 ........................................................................................... 122
13.14 68HC908JB12 ............................................................................................ 123
13.15 68HC908JB16 ............................................................................................ 124
13.16 68HC908JG................................................................................................ 125
13.17 68HC908JK ................................................................................................ 126
13.18 68HC908JL ................................................................................................ 127
13.19 68HC908JR................................................................................................ 128
13.20 68HC908JW ............................................................................................... 128
13.21 68HC908KX ............................................................................................... 129
13.22 68HC908LB................................................................................................ 130
13.23 68HC908LD................................................................................................ 131
13.24 68HC908LJ ................................................................................................ 132
13.25 68HC908LK................................................................................................ 133
13.26 68HC908LT ................................................................................................ 134
13.27 68HC908LV................................................................................................ 135
13.28 68HC908MR4/8.......................................................................................... 136
13.29 68HC908MR16/32...................................................................................... 136
13.30 68HC908QL ............................................................................................... 137
13.31 68HC908QB ............................................................................................... 138
13.32 68HC908QC............................................................................................... 139
13.33 68HC908QT ............................................................................................... 140
13.34 68HC908QY ............................................................................................... 141
13.35 68HC908RF ............................................................................................... 142
13.36 68HC908RK ............................................................................................... 143
13.37 68HC908SR ............................................................................................... 144
14 CYCLONE ERROR CODES....................................................................... 145
14.1 Debug Mode Communication Errors .......................................................... 145
14.2 SAP Image Handling Errors ....................................................................... 145
14.3 SAP Algorithm Header Operation Handling Errors .................................... 146
iv Cyclone PRO User Manual
CYCLONE PRO
14.4 SAP Operation Errors .................................................................................146
14.5 SAP Blank Check Range and Module Errors .............................................146
14.6 SAP Erase Range and Module Errors ........................................................146
14.7 SAP Program Byte, Word, and Module Errors............................................146
14.8 SAP Verify Checksum Errors......................................................................147
14.9 SAP Verify Range and Module Errors ........................................................147
14.10 SAP User Function Errors ..........................................................................147
14.11 SAP Trim Errors..........................................................................................147
14.12 Unrecoverable Fatal Errors.........................................................................147
14.13 External Memory Errors ..............................................................................148
14.14 Serial Number Errors ..................................................................................149
14.15 Successful Download Counter Errors .........................................................149
Cyclone PRO User Manual 1
CYCLONE PRO
1 INTRODUCTION
The Cyclone PRO is both a powerful production programmer and a versatile
development/debugging tool for Freescale microcontroller-based hardware
architectures.
The Cyclone PRO is designed to withstand the demands of a production
environment. It is a Stand-Alone Programmer (SAP) that can be operated
manually or used to host automated programming. In manual SAP mode the
unit is operated using buttons and/or the LCD Menu. Host-controlled SAP
mode, for automated programming, is accomplished using either a command
line utility, RS232 protocol, UDP protocol, or the Cyclone Automated Control
DLL.
The Cyclone PRO is also a very effective development tool. It can operate
interactively with a PC for development debugging and programming, and
conveniently supports multiple communication interfaces.
The following features help make the Cyclone PRO such a versatile tool for
both production and debug:
• Multiple Freescale Architecture Support
• ColdFire V1
•HCS08
•RS08
•HC(S)12(X)
•HC908(MON08)
• Versatile Light Touch Buttons
• Performs Stand-Alone Programming (SAP) operations
• Navigates LCD menu
• Resets Cyclone PRO
2 Cyclone PRO User Manual
CYCLONE PRO
• Powerful LCD Menu
• Executes SAP operations
• Selects SAP image
• Configures Cyclone PRO IP settings
• Displays operation status
• Convenient LED Display
• Shows programming status during operation
• Indicates success or specifies source of failure
• Multiple Communication Interfaces
• Ethernet 10/100 baseT
• USB 1.1
• Serial Baud 115200, no parity, 8 data bits, 1 stop bit (adjustable to
57600 Baud for RS232 controlled production environment)
• Multiple Storage Media
• 3 Megabytes of onboard storage. Stores data to be programmed,
programming algorithms, and any necessary configuration settings.
• CompactFlash support available with purchase of CompactFlash
activation license.
• Versatile Power Management
• Uses electromechanical relays to automatically cycle target power
when necessary during security protocol (MON08) and BDM mode
entry.
• Jumper-settable power management schemes for MON08 and
BDM targets.
• Automatically supplies Vpp voltage for RS08 targets during flash
erasing and programming operations.
• Multiple Voltage Operation
• Automatically detects and caters to target voltages ranging from
1.8V to 5V.
Cyclone PRO User Manual 3
CYCLONE PRO
• Multiple Frequency Operation
• Automatically detects and caters to target bus frequencies or BDM
frequencies ranging from 1MHz to 8MHz (MON08) or 16KHz to
50MHz (BDM).
• Provides a 9.8304 MHz or 4.1952 MHz oscillator signal to overdrive
target crystal and RC clock circuitry (MON08).
• Dynamic Signal Configuration
• Software-configurable port-pin settings for Monitor ROM entrance.
• Multiple SAP Images
• Onboard Flash stores up to 8 images.
• CompactFlash (if activated) stores more than 200 images.
• Images for different architectures can co-exist.
• Multiple Memory Modules In One SAP Image
• Supports multiple programming algorithms for internal or external
memory modules such as EEPROM and Flash.
• Automatic Serial Number Mechanism
• Supports serial number programming and automatic
incrementation
• Supports multiple serial number structures within each SAP Image.
• Powerful Automated Control Package For Production Control
• Basic Automated Control Package (included) supports host-
controlled SAP operations for one Cyclone PRO. Professional and
Enterprise Automated Control Packages available for purchase.
• Multiple Cyclone PROs can create a Gang Programmer using a
variety of different communication interfaces.
• Different SAP Images on different Cyclone PROs can execute
simultaneously.
• Mixed-architecture targets can perform SAP operations
simultaneously.
4 Cyclone PRO User Manual
CYCLONE PRO
• Versatile Debugging and Programming Software
• Free image creation utility, image management utility, and IP
configuration utility
• Includes free debugger and programmer for HC908 targets
• Includes free programmer for ColdFire V1, HC9S08, RS08, and
HC(S)12(X) targets
• Debugger for ColdFire V1, HC9S08, RS08, and HC(S)12(X) targets
available for purchase
• Activation license for CompactFlash support available for purchase
The Cyclone PRO is an all-in-one solution for production programming and
debugging of Freescale microcontroller-based hardware.
Indice
Altri manuali Freescale Semiconductor Scheda madre
Freescale Semiconductor
Freescale Semiconductor MC13853 LNA Manuale utente
Freescale Semiconductor
Freescale Semiconductor MC13851 Manuale utente
Freescale Semiconductor
Freescale Semiconductor KL25Z128VLK Manuale utente
Freescale Semiconductor
Freescale Semiconductor NXP 56F8013 Manuale utente
Freescale Semiconductor
Freescale Semiconductor K20D72M Manuale utente
Freescale Semiconductor
Freescale Semiconductor LS1043ARDB Manuale utente
Freescale Semiconductor
Freescale Semiconductor FRDMSTBC-A8471 Guida di riferimento
Freescale Semiconductor
Freescale Semiconductor MPC5777C EVB Manuale utente
Freescale Semiconductor
Freescale Semiconductor Freedom FRDM-KE04Z Manuale utente
Freescale Semiconductor
Freescale Semiconductor Freedom FRDM-KW24D512 Manuale utente
Freescale Semiconductor
Freescale Semiconductor i.MX 6SoloLite Linux Manuale utente
Freescale Semiconductor
Freescale Semiconductor TWR-K80F150M Manuale utente
Freescale Semiconductor
Freescale Semiconductor KIT33903 Manuale utente
Freescale Semiconductor
Freescale Semiconductor FRDM-KL25Z Manuale utente
Freescale Semiconductor
Freescale Semiconductor KIT33810EKEVME Manuale utente
Freescale Semiconductor
Freescale Semiconductor MCF5206eLITE Manuale utente
Freescale Semiconductor
Freescale Semiconductor kinetis TWR-SMPS-LVFB Manuale utente
Freescale Semiconductor
Freescale Semiconductor IB112 Manuale utente
Freescale Semiconductor
Freescale Semiconductor i.MX28 EVK Manuale utente
Freescale Semiconductor
Freescale Semiconductor NXP DEMO9S08JS16 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
