Frequency Central Looking glass Manuale utente

Frequency central

Build documentation for:

Looking glass

5 x 5 active patchbay/matrix mixer/switcher with normal and inverted outputs and attenuators

Main PCB Control PCB

Looking Glass is an 5x5 active patchbay/matrix mixer/switcher. It features:

•5 inputs (1 through to 5), each with attenuators

•5 inverted outputs (A through to E) which are 180o out of phase with the inputs

•5 normal outputs (A through to E) which are in phase with the inputs

•A switch matrix of 25 push on/push off switches and LED status indicators

Any of the 5 inputs can be patched to any of the 5 outputs simply by pressing the corresponding

switches. A patched signal will appear at both normal and inverted outputs simultaneously.

A single input can be patched to a single output. A single input can be patched to multiple outputs.

Multiple inputs can be patched to a single output. Multiple inputs can be patched to multiple

outputs.

The attenuators allow you to reduce the volume of an incoming signal. If you add many inputs to

one output you will of course cause clipping (which may or may not be desirable!), the attenuators

are your on-board way around this.

Bill of Materials

1/4 watt metal film:

100R x 10

10K x 5

100K x 15

1/8 W 1% 0805 SMD:

10K x 25

100K x 25

47uF electrolytic x 2

TL072 x 1

TL084 x 2

3mm red LED x 25

8 pin socket x 1

14 pin socket x 2

B100K Song Huei tall

trimmer x 5

Push button x 25

Button caps x 25

3.5mm socket x 15

Male 40 pin header

Female 40 pin header

10 pin box header x 1

Control PCB rear –the SMD resistors

Looking Glass uses 50 surface mount resistors on the rear of the Control PCB (the 10K are all current

limiting resistors for the LEDs, while the 100K are mixing resistors). This may sound intimidating if

you haven’t used SMD before, but its quite easy really. We’ve even used larger 1206 pads to make it

easier. We recommend that you use 0805 resistors. The combination of 1206 pads and 0805

resistors means that there is plenty of space to apply solder/heat around the resistor.

1. Lightly tin all SMD resistors pads on the PCB. This means

that you should use your iron to heat each pad and apply

a small amount of solder.

2. Pick up a 0805 resistor with tweezers and present it to the

pads. While holding the resistor in place, heat the pad.

This should hold the resistor in place. Now heat the other

pad to complete the process of placing this resistor.

3. Sometimes it’s worth retouching both pads just to make sure!

NOTE:

First pass: 10K resistors

Second pass: 100K resistors

Don’t mix them up!

Main PCB front –the through hole components

1. Solder all resistors - don’t mix up the 100R and 100K

2. Solder all IC sockets

3. Solder the power header –if you’re using box type, observe correct polarity

4. Solder all electrolytic capacitors

5. Cut male headers to size and solder them into place. Make sure that they stick out of the

bottom of the PCB.

Control PCB assembly

1. Place all 25 push buttons onto the PCB. Place a piece of card (or similar) over all 25 push

buttons. Flip the whole lot over and solder one tab on each switch. Check that they are all

seated correctly, then solder the rest of the pads.

2. Place all sockets on the PCB, making sure the ground tabs line up with the PCB’s ground

pads, then place the panel over them. This will assure that the sockets are correctly

positioned. Flip the whole lot over and solder the sockets into place.

3. Place all 25 LEDs (short leg = square pad) and solder into place.

4. Place all 5 Song Huei tall trimmers and solder into place.

5. Cut female headers to size and solder them into place. Make sure that they stick out of the

bottom of the PCB.

Make sure that you plug the Main PCB into the Pots ‘n’ sockets PCB the right way around –

Frequency Central logo should be the right way up.

Hey Eurokidz! Tired of patch cables? Then throw them all away* and use our nifty Looking Glass

patchbay/matrix mixer/switcher instead!

*Well, not all of them, obviously.

RDH 16/06/22

http://www.frequencycentral.co.uk/

Altri manuali Frequency Central Unità di controllo

Frequency Central

Frequency Central Cosmic Background Manuale

Frequency Central

Frequency Central Continuum Phaser ii Manuale

Frequency Central

Frequency Central CEMvelope Manuale

Frequency Central

Frequency Central Stasis Leak Manuale

Frequency Central

Frequency Central Waverider Digital VCO Manuale

Frequency Central

Frequency Central Stasis Leak Manuale utente

Frequency Central

Frequency Central Continuum Phase Shifter Manuale

Frequency Central

Frequency Central Seismograf Manuale

Frequency Central

Frequency Central MU System X Dual ADSR Manuale

Frequency Central

Frequency Central Whiteface Manuale

Frequency Central

Frequency Central System X CV Mixer Manuale

Frequency Central

Frequency Central Raging Bull 2.0 Manuale

Frequency Central

Frequency Central Polygraf Manuale

Frequency Central

Frequency Central MU System X Lowpass Filter Manuale

Frequency Central

Frequency Central MU System X Dual Amplifier Manuale

Frequency Central

Frequency Central System X Filter 2 Manuale

Frequency Central

Frequency Central Pocket Calculator Rev(2) Manuale

Frequency Central

Frequency Central Waverider VCDO MKii Manuale

Frequency Central

Frequency Central System X Filter Manuale

Frequency Central

Frequency Central Dual XVCA Manuale

Frequency Central

Frequency Central Deep Thought Manuale

Frequency Central

Frequency Central Raging Bull Manuale

Frequency Central

Frequency Central More VCAs Manuale

Frequency Central

Frequency Central State 700 Manuale

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente