Fujitsu PRIMEQUEST 480 Manuale tecnico

C122-H001-02EN

Front Cover

INSTALLATION PLANNING MANUAL

C122-H001-02EN

FOR SAFE OPERATION

This manual contains important information regarding the use and handling of this

product. Read this manual thoroughly. Use the product according to the instructions

and information available in this manual. Keep this manual handy for further

reference.

Fujitsu makes every effort to prevent users and bystanders from being injured or from

suffering damage to their property. Use the product according to this manual.

ABOUT THIS PRODUCT

This product server is designed and manufactured for use in standard applications

such as office work, personal device, household appliance, and general industrial

applications. This product is not intended for use in nuclear-reactor control systems,

aeronautical and space systems, air traffic control systems, mass transportation

control systems, medical devices for life support, missile launch control systems or

other specialized uses in which extremely high levels of reliability are required, the

required levels of safety cannot be guaranteed, or a failure or operational error could

be life-threatening or could cause physical injury (referred to hereafter as “high-risk”

use). You shall not use this product without securing the sufficient safety required for

the high-risk use. If you wish to use this product for high-risk use, please consult with

sales representatives in charge before such use.

C122-H001-02EN

RADIO FREQUENCY INTERFERENCE STATEMENT

The following notice is for EU users only.

The following notice is for USA users only.

Laser standards

WARNING: This is a product which meets Class A of EN55022. In a domestic environment this

product may cause radio interference in which case the user may be required to take adequate

measures.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

This equipment includes Class 1 laser products and complies with FDA Radiation Performance

Standards, 21 CFR 1040.10 and 1040.11, and the International Laser Safety Standards

IEC60825-1: 2001.

C122-H001-02EN

TRADEMARK ACKNOWLEDGEMENTS

zAdobe, Acrobat, and Reader are either registered trademarks or trademarks of

Adobe Systems Incorporated in the United States and/or other countries.

zEthernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation

in the United States and other countries.

zAll other product names mentioned herein are the trademarks or registered

trademarks of their respective owners.

zEvery system and product name in this manual are not always noted with

trademark or registered trademark symbols (™), ().

The contens of this manual may be revised without prior notice.

The contents of this manual shall not be disclosed in any way or reproduced in any

media without the express written permission of Fujitsu Limited.

C122-H001-02EN

Revision History

(1/1)

Edition Date Revised section

(Added/ Deleted/ Altered) Details

01 2005-07-11  

02 2005-09-15 Entire manual (Altered)

Section 2.2.1 (1)

(Altered/Added)

Section 2.2.1 (2) (Added)

• Technical brush-up

• Modification of the manual

title

• Addition of PRIMEQUEST

series

• Modification of the concept

of units operational grouping

• Addition of description for

concentration of small

equipment

• Addition of conditions for

using mobile phones

Note: In this table, a revised section is indicated by its section number in the current

edition. An asterisk (*) indicates a section in the previous edition.

C122-H001-02EN i

Preface

This manual describes requirements and concepts for installation and facility planning

for the PRIMEQUEST 480 and 440. Installation and facility planning should be

performed together with your assigned Fujitsu representatives according to the

instructions provided in this manual.

This manual is intended for persons introducing and planning the installation of a

PRIMEQUEST server, or those who manage server operations. The reader of this

manual is expected to have some knowledge of or experience with server installation

planning.

Structure and Contents of this Manual

This manual is organized as described below:

CHAPTER 1 Installation Reference

This chapter provides outline drawings of PRIMEQUEST units and requirements for

installing the servers.

CHAPTER 2 Connection Reference

This chapter provides cable connection diagrams and lists of required cables.

CHAPTER 3 Precautions Pertaining to Delivery and Installation

This chapter describes precautions regarding delivery and installation of the

equipment.

Acronyms & Abbreviations

This section defines acronyms and abbreviations used in this manual.

Index

The index provides page references for keywords to allow the reader to quickly find

necessary information.

ii C122-H001-02EN

Preface

Other Reference Manuals

The manuals listed below are related to this manual.

Before installing the equipment, first read the PRIMEQUEST 480/440 Installation

Manual (C122-E001EN) and see the related manual.

PRIMEPOWER/PRIMEQUEST Series Installation Planning Manual (C120-

H007EN)

PRIMEQUEST 480/440 System Design Guide (C122-B001EN)

Environmental Requirements for Using This Product

This product is a general-purpose computer intended for use in a computer room.

Conventions for Alert Messages

This manual uses the following conventions to show the alert messages. An alert

message consists of an alert signal and alert statements.

Alert messages in the text

In the text, the alert messages are indented to distinguish them from regular text. A

wider space precedes and follows the message to show where the message begins and

ends.

(Example)

The template is created on a scale of 1:50. When printing the template from

AcrobatReaderor AdobeReadersoftware, be sure to uncheck the

checkbox of Fit to page on the Print dialog box.

Reader Feedback

This indicates information that could help the user to use the

product more effectively.

• In this manual, it is assumed that two BMMs (optional products) can be connected to a single I/O

unit; this is reflected both in the explanations and in the figures included in this manual. At

present, however, the PRIMEQUEST 480/400 series supports only connection to one BMM

(BMM#0) per I/O unit.

• If you find any errors or unclear statements in this manual, please fill in the "Reader’s Comment

Form" sheet at the back of this manual and forward it to the address indicated at the bottom of

the sheet.

• This manual is subject to revision without prior notice.

Altri manuali per PRIMEQUEST 480

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fujitsu Server

Fujitsu

Fujitsu PRIMERGY TX600 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX100 S3 Manuale utente

Fujitsu

Fujitsu PRIMERGY DX920 S3 Manuale

Fujitsu

Fujitsu SPARC Enterprise M4000 Manuale

Fujitsu

Fujitsu PRIMERGY TX120 S2 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX900 Guida rapida per l'utente

Fujitsu

Fujitsu FUTRO S700 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX100 S3 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Manuale utente

Fujitsu

Fujitsu SPARC M12 Manuale utente

Fujitsu

Fujitsu FW-S Series SERVIS Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu SPARC Enterprise M8000 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manuale del proprietario

Fujitsu

Fujitsu primergy h250 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX300 S6 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX200 S3 Guida

Fujitsu

Fujitsu Primergy CX270 S2 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX2520 M1 Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 520A Manuale tecnico

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Istruzioni per il montaggio

Fujitsu

Fujitsu SPARC Enterprise T5140 Guida all'installazione

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente