Fujitsu PRIMERGY BX400 S1 Manuale utente

Operating Manual - English

PRIMERGY BX400 S1

Blade Server

System Unit Operating Manual

December 2012

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

All hardware and software names used are trade names and/or trademarks of their respective

manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

BX400 S1 Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Operating Manual BX400 S1

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

BX400 S1 Operating Manual

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

Operating Manual BX400 S1

BX400 S1 Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.1 Concept and target groups for this manual . . . . . . . . . 11

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 12

1.3 Performance features . . . . . . . . . . . . . . . . . . . . . 13

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 24

1.5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 25

2 Installation steps, overview . . . . . . . . . . . . . . . . . . 29

3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 31

3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.3 Transporting the system unit . . . . . . . . . . . . . . . . . 39

3.4 Notes on installation into the rack . . . . . . . . . . . . . . 40

3.5 Environmental protection . . . . . . . . . . . . . . . . . . . 41

4 Installing the hardware . . . . . . . . . . . . . . . . . . . . . 43

4.1 Installation procedure . . . . . . . . . . . . . . . . . . . . . 44

4.2 Unpacking the system unit . . . . . . . . . . . . . . . . . . 44

4.3 Setting up the floorstand model . . . . . . . . . . . . . . . . 45

4.4 Installing/removing the system unit . . . . . . . . . . . . . . 46

4.4.1 Installation in the rack . . . . . . . . . . . . . . . . . . . . . . 48

4.4.2 Installing/removing the system unit . . . . . . . . . . . . . . . 50

4.5 Connecting devices to the system unit . . . . . . . . . . . . 53

4.5.1 Cable routing . . . . . . . . . . . . . . . . . . . . . . . . . . 55

4.6 Connecting the system unit to the mains . . . . . . . . . . 55

4.6.1 Using cable ties . . . . . . . . . . . . . . . . . . . . . . . . . 57

Operating Manual BX400 S1

Contents

4.7 Instructions for connecting/disconnecting cables . . . . . . 58

5 Installation and operation . . . . . . . . . . . . . . . . . . . . 59

5.1 Control and display elements . . . . . . . . . . . . . . . . . 59

5.1.1 Front of system . . . . . . . . . . . . . . . . . . . . . . . . . . 59

5.1.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 62

5.1.1.2 LEDs on the control panel . . . . . . . . . . . . . . . . . . . 62

5.1.1.3 System ID card . . . . . . . . . . . . . . . . . . . . . . . . 64

5.1.2 Back of system . . . . . . . . . . . . . . . . . . . . . . . . . . 65

5.1.2.1 Control and display elements on the management blade . . . 65

5.1.2.2 Indicator on the hot-plug power supply units . . . . . . . . . 68

5.1.2.3 Indicators on the hot-plug fan modules . . . . . . . . . . . . 69

5.2 Switching the system unit on/off . . . . . . . . . . . . . . . . 70

5.3 Configuring management blades . . . . . . . . . . . . . . . . 72

5.4 Cleaning the system unit . . . . . . . . . . . . . . . . . . . . 77

6 Property and data protection . . . . . . . . . . . . . . . . . . 79

7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 81

7.1 System power indicator does not light up . . . . . . . . . . . 81

7.2 Front or back error LED flashes orange . . . . . . . . . . . . 82

7.3 System switches itself off . . . . . . . . . . . . . . . . . . . . 83

8 Hot-plug components . . . . . . . . . . . . . . . . . . . . . . 85

8.1 Server blades and storage blades . . . . . . . . . . . . . . . 86

8.2 Connection blades . . . . . . . . . . . . . . . . . . . . . . . 92

8.2.1 Connection Blade GbE Switch/IBP 36/12 (SB11A) . . . . . . . . 93

8.2.2 Connection Blade GbE Switch/IBP 36/8+2 (SB11) . . . . . . . . 95

8.2.2.1 Connection blade stacking . . . . . . . . . . . . . . . . . . 98

8.2.3 Connection Blade GbE Switch/IBP 18/6 (SB6) . . . . . . . . . . 99

8.2.4 Connection Blade 10 GbE Switch/IBP 18/8 . . . . . . . . . . . 101

8.2.5 Connection Blade Ethernet Pass Thru 10Gb 18/18 . . . . . . 103

8.2.6 Connection Blade 8Gb FC Switch 18/8 . . . . . . . . . . . . . 106

BX400 S1 Operating Manual

Contents

8.2.7 Connection Blade 8Gb FC Pass Thru 18/18 . . . . . . . . . . 108

8.2.8 Connection Blade DCB SW 10Gb 18/6+6 . . . . . . . . . . . . 110

8.2.9 Connection Blade FEX B22F 10Gb (Cisco) . . . . . . . . . . . 113

8.2.10 Connection Blade Infiniband Switch 40 Gb 18/18 . . . . . . . 115

8.2.11 Connection Blade Infiniband Switch 56 Gb 18/18 FDR . . . . . 117

8.2.12 Connection Blade SAS Switch 6 Gb 18/6 . . . . . . . . . . . . 119

8.2.13 Fitting rules for connection blades . . . . . . . . . . . . . . . . 120

8.2.14 Port assignment of the connection blades . . . . . . . . . . . . 123

8.2.15 Installing a connection blade . . . . . . . . . . . . . . . . . . 125

8.3 Management blades . . . . . . . . . . . . . . . . . . . . . . 131

8.4 Hot-plug power supply units . . . . . . . . . . . . . . . . . 132

8.4.1 Replacing the power supply unit . . . . . . . . . . . . . . . . . 134

8.5 Hot-plug fan modules . . . . . . . . . . . . . . . . . . . . . 136

Operating Manual BX400 S1

Contents

Altri manuali per PRIMERGY BX400 S1

Indice

Altri manuali Fujitsu Server

Fujitsu

Fujitsu Primergy RX4770 M1 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise M8000 Guida all'installazione

Fujitsu

Fujitsu PRIMEQUEST 580A Manuale tecnico

Fujitsu

Fujitsu PRIMERGY BX960 S1 Manuale utente

Fujitsu

Fujitsu Primergy RX100 S3 Manuale del proprietario

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Manuale utente

Fujitsu

Fujitsu SE700 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX220 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX924 S4 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX2520 M1 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX600 S3 Manuale utente

Fujitsu

Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance... Manuale utente

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Manuale utente

Fujitsu

Fujitsu Primergy TX300 S4 Guida rapida

Fujitsu

Fujitsu PRIMERGY RX4770 M6 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX2520 M5 Manuale utente

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Manuale del proprietario

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX150 S6 Guida

Fujitsu

Fujitsu Primergy RX600 Guida

Fujitsu

Fujitsu 1PRIMERGY RX600 S4 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuale di servizio

Fujitsu

Fujitsu SPARC Enterprise M8000 Manuale di servizio

Fujitsu

Fujitsu PRIMERGY RX100 S8 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente