Fujitsu PRIMERGY RX4770 M6 Manuale utente

FUJITSU Server PRIMERGY RX4770 M6

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

12/2020

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was

created to meet the regulations of a quality management system which complies with the

requirements of the standard DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

RX4770 M6 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual RX4770 M6

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

RX4770 M6 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 10/2020 Initial release

V 2.0 11/2020 Update 1

●Apache Pass, BarlowPass, NVM/LRDIMM

renamed, new term is Optane PMem

●Instructions for using ISM added to: Verifying

system information backup/restore, Resetting

the boot retry counter, Resetting the error

status after replacing CPUs, Resetting the

error status after replacing memory modules

● BIOS menu changed: Looking for the MAC

address of a LAN controller

● Description of the SFP+ transceiver modules

changed

● Preliminary/Concluding steps: Resetting the

error status after replacing memory modules

or CPU removed

● Removing/ Replacing the TPM - Tools: a pair

of side-cut pliers added

V 3.0 11/2020 Update 2

●Screw list changed

●Updating the golden image for BIOS firmware

● Reuse HDD frames in Japan

● Expansion cards in standard PCIe slots

Upgrade and Maintenance Manual RX4770 M6

Content

1 Introduction 17

1.1 Concept and target groups of this manual 17

1.2 Notational conventions 17

2 Before you start 19

2.1 Basic information 19

2.1.1 Proceeding 19

2.1.2 Advanced Thermal Design (ATD) 19

2.1.3 Installing optional components 20

2.1.4 Replacing a defective component 20

2.2 Classification of procedures 21

2.2.1 Assignment of unit categories 21

2.2.2 Customer Replaceable Units (CRU) 21

2.2.3 Upgrade and Repair Units (URU) 22

2.2.4 Field Replaceable Units (FRU) 23

2.3 Average task duration 24

2.4 Tools you need at hand 25

2.5 Documentation overview 26

2.5.1 Downloading manuals 26

2.5.2 List of documents 26

3 Important information 29

3.1 Introduction 29

3.2 Safety instructions 29

3.2.1 Basic safety instructions 29

3.2.2 Before starting up 30

RX4770 M6 Upgrade and Maintenance Manual

3.2.3 Installation and operation 30

3.2.4 Batteries 33

3.2.5 Working with optical disk drives (ODDs) and media 33

3.2.6 Laser information 35

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 35

3.2.8 Transporting the server 37

3.2.9 Installing the server in the rack 38

3.2.10 Other important information 38

3.3 ENERGY STAR 39

3.4 CE conformity 39

3.5 FCC Class A Compliance Statement 40

3.6 Environmental protection 41

4 Basic hardware procedures 43

4.1 Using diagnostic information 43

4.1.1 Proceeding 43

4.1.2 Determining the error class 43

4.1.3 Locating the defective component 44

4.2 Removing the front cover with lock 45

4.3 Shutting down the server 46

4.4 Disconnecting the power cord 47

4.4.1 Disconnecting the power cord (AC PSU) 47

4.5 Getting access to the component 48

4.5.1 Safety notes 48

4.5.2 Extending the server out of the rack 48

4.5.3 Removing the server from the rack 50

4.5.4 Removing the top covers 51

4.6 Reassembling 53

4.6.1 Safety notes 53

4.6.2 Installing the top covers 53

Content

Upgrade and Maintenance Manual RX4770 M6

4.6.3 Installing the server in the rack 55

4.6.4 Sliding the server into the rack 58

4.7 Connecting the power cord 59

4.7.1 Connecting the power cord (AC PSU) 59

4.8 Switching on the server 60

4.9 Installing the front cover with lock 61

4.10 Handling riser modules 62

4.10.1 Positions of riser modules 62

4.10.2 Removing a riser module 63

4.10.3 Installing a riser module 63

4.11 Handling the fan cage 64

4.11.1 Removing the fan cage 64

4.11.2 Installing the fan cage 66

4.12 Handling the air duct 68

4.12.1 Removing the air duct 68

4.12.2 Installing the air duct 71

4.13 Handling the top system board carrier 73

4.13.1 Removing the top system board carrier 73

4.13.2 Installing the top system board carrier 76

5 Basic software procedures 81

5.1 Validation 81

5.2 Starting the maintenance task 81

5.2.1 Suspending BitLocker functionality 81

5.2.2 Disabling the boot watchdog 82

5.2.3 Removing backup and optical disk media 84

5.2.4 Verifying and configuring the backup software solution 84

5.2.5 Switching on the ID indicator 84

5.3 Completing the maintenance task 85

5.3.1 Updating or recovering the BIOS and iRMC S5 85

5.3.2 Verifying system information backup or restore 88

Content

RX4770 M6 Upgrade and Maintenance Manual

5.3.3 Updating expansion card firmware 89

5.3.4 Reconfiguring the backup software solution 91

5.3.5 Resetting the boot retry counter 91

5.3.6 Resetting the error status after replacing memory modules or

CPU 93

5.3.6.1 Resetting the error status after replacing CPUs 93

5.3.6.2 Resetting the error status after replacing memory modules 95

5.3.6.3 Locating the defective server 97

5.3.7 Enabling the boot watchdog 98

5.3.8 Enabling replaced components in the BIOS 99

5.3.9 Verifying the memory mode 99

5.3.10 Verifying the system time settings 100

5.3.11 Viewing and clearing the System Event Log (SEL) 101

5.3.12 Updating the NIC configuration file in a Linux and VMware

environment 104

5.3.13 Resuming BitLocker functionality 104

5.3.14 Performing a RAID array rebuild 105

5.3.15 Looking for MAC/WWN/GUID and SAS addresses 106

5.3.15.1 Basic information 106

5.3.15.2 Looking for the MAC address of a LAN controller 107

5.3.15.3 Looking for the WWN address of a fibre channel controller 108

5.3.15.4 Looking for the GUID address of an infiniband or Omni-Path

controller 109

5.3.15.5 Looking for SAS addresses of SAS controllers for external

devices 109

5.3.16 Using the Chassis ID Prom Tool 110

5.3.17 Configuring LAN teaming 112

5.3.18 Switching off the ID indicator 113

5.3.19 Performing a fan test 114

5.3.20 Updating the golden image 115

5.3.20.1 Updating the golden image for iRMC S5 firmware 115

5.3.20.2 Updating the golden image for BIOS firmware 117

6 Power supply unit (PSU) 119

6.1 Safety notes 119

6.2 Basic information 119

Content

Upgrade and Maintenance Manual RX4770 M6

Indice

Altri manuali Fujitsu Server

Fujitsu

Fujitsu primergy h250 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX300 S5 Manuale del proprietario

Fujitsu

Fujitsu PRIMERGY BX900 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX200 S7 Guida utente

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Istruzioni per il montaggio

Fujitsu

Fujitsu Primergy TX300 S4 Manuale utente

Fujitsu

Fujitsu Primergy RX300 S2 Guida

Fujitsu

Fujitsu PRIMERGY RX4770 M2 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX150 S8 Manuale utente

Fujitsu

Fujitsu FUTRO S9010 Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu Primergy BX2560 M1 Manuale utente

Fujitsu

Fujitsu PRIMEPOWER900 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX1330 M1 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX100 S8 Manuale utente

Fujitsu

Fujitsu ETERNUS LT160 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuale di servizio

Fujitsu

Fujitsu 200/200R Manuale utente

Fujitsu

Fujitsu SE500 Manuale utente

Fujitsu

Fujitsu SPARC M10-4 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX1330 M2 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise T5140 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX900 S2 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente