Fujitsu PRIMERGY TX200 S6 Manuale del proprietario

Service Supplement - English

PRIMERGY TX200 S6

Server

Service Supplement

Edition July 2010

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

email: [email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX200 S6 Service Supplement

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety notes and other important information" and

ensure these safety notes are understood before using the product. Keep this

manual and the manual "Safety notes and other important information" in a safe

place for easy reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Service Supplement TX200 S6

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

TX200 S6 Service Supplement

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– USB Flash Module (UFM)

– CSS (Customer Self Service)

Service Supplement TX200 S6

TX200 S6 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 9

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 12

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 15

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 23

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.1.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 23

4.1.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 23

4.1.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . 23

4.1.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.1.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 24

4.1.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . 25

4.1.3 System fans . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1.3.1 Removing the system fan 2 (or 2&4) . . . . . . . . . . . . . 25

4.1.3.2 Removing the system fan 1 (or 1&3) . . . . . . . . . . . . . 27

4.2 Replacing the front panel module . . . . . . . . . . . . . . . 28

4.3 Replacing the standard PSU . . . . . . . . . . . . . . . . . . 30

4.4 Replacing the Power backplane . . . . . . . . . . . . . . . . 32

4.5 Replacing the 3.5“ HDD backplane . . . . . . . . . . . . . . 34

4.6 Replacing the 2.5“ HDD backplane . . . . . . . . . . . . . . 36

4.7 Replacing the intrusion switches . . . . . . . . . . . . . . . 38

4.8 Replacing the IDTEMP combo . . . . . . . . . . . . . . . . . 40

4.9 Replacing the TPM . . . . . . . . . . . . . . . . . . . . . . . 42

Service Supplement TX200 S6

Contents

4.10 Replacing the UFM . . . . . . . . . . . . . . . . . . . . . . . 44

4.11 Replacing the system board . . . . . . . . . . . . . . . . . . 46

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1.1 Front panel module . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1.2 3.5“ HDD backplane . . . . . . . . . . . . . . . . . . . . . . . 52

5.1.3 2.5“ HDD backplane . . . . . . . . . . . . . . . . . . . . . . . 53

5.1.4 Power backplane . . . . . . . . . . . . . . . . . . . . . . . . . 54

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

TX200 S6 Service Supplement 9

1 Introduction

The PRIMERGY TX200 S6 Server is an Intel-based server for medium-sized

and large networks. The server is suitable for use as a file server as well as an

application, information, or Internet server. It is available as a floorstand or rack

model.

1.1 Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

1.2 Documentation overview

Service DVD

Service partners of Fujitsu Technology Solutions can order a Service DVD

PRIMERGY. On the DVD the following manuals are available in pdf format:

– "Safety notes and other important information" manual

– "PRIMERGY TX200 S6 Server Operating Manual"

– "PRIMERGY TX200 S6 Server Options Guide"

– "System Board D2799 for PRIMERGY TX200 S6 Technical Manual"

– "PRIMERGY TX200 S6 Server Service Supplement"

– "D2799 BIOS Setup Utility for PRIMERGY TX200 S6" manual

10 Service Supplement TX200 S6

Documentation overview

Information/procedure Manual

Detailed safety notes "Safety notes and other

important information"

manual

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External connectors

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal or replacing of the CSS

components:

– Hot-plug power supply units

– Hot-plug hard disk drives

– Memory modules

– System fans

– Expansion cards

Information about the system board:

– Features of the system board

– Board layout

– Switches

–LEDdisplays

– Replacing the battery

Technical Manual

Table 1: Overview of the documentation TX200 S6

Altri manuali per PRIMERGY TX200 S6

Indice

Altri manuali Fujitsu Server

Fujitsu

Fujitsu Primergy RX100 S4 Guida

Fujitsu

Fujitsu PRIMERGY TX150 S8 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX600 PG-LNB101 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX200 S5 Manuale utente

Fujitsu

Fujitsu PRIMERGY 300 Manuale utente

Fujitsu

Fujitsu BS2000/OSD Manuale utente

Fujitsu

Fujitsu PRIMERGY BX924 S3 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX900 S1 Manuale del proprietario

Fujitsu

Fujitsu Primergy RX300 S2 Guida

Fujitsu

Fujitsu S540 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX200 S8 Guida utente

Fujitsu

Fujitsu SPARC M10-4 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX140 S1 Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Istruzioni operative e di manutenzione

Fujitsu

Fujitsu PRIMERGY TX600 S2 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX1310 M3 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Manuale utente

Fujitsu

Fujitsu Primergy RX100 S4 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX150 S4 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX300 S6 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu PRIMERGY RX600 S3 Manuale utente

Fujitsu

Fujitsu PRIMERGY CX2550 M2 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente