5
The measured value moves to the second display line [L].A “+”
or “−” is shown in front of the rst display line [N]. The device is
ready to make the second measurement.
·Make a second measurement by pressing the measure button
[03].
The result of the second measurement will be visible in the rst
display line [N]. The result (the addition or subtraction of the two
measurements) can be read in the main display line [M].
·Add or subtract (depends on which you’ve choose for the rst
calculation) an additional measurement can be done by press
the measure button [03] to activate the laser again, and press
it a second time to make the measurement.
The result of the rst calculation moves to the second display
line [L], the result of the second measurement is shown on the
rst display line [M]. The new result of the calculation will be
visible on the main display line [N].
NOTE
To change from “+” to “−” (or vica versa) for making the sec-
ond measurement can be done by pressing the add/subtract
button [02]. The result of the rst calculation moves to the
second display line [L], the symbol in front of the rst display
line [M] changes from “+” to “−” (or vica versa). This action
also activates the laser and makes the device ready to measure
the additional distance. You can make the new measurement
by pressing the measure button [03].
You can repeat this steps just as much as needed.
AREA MEASUREMENT
This device allows you to calculate the area of a
(rectangular) area.
·Press the function button [01] once.
The function indicator [D] will show you the area measurement
symbol. The ashing line in this function indicator [D] shows
which lenght you have to measure.
·Measure the rst side of the rectangle, indicated by the func-
tion indicator [D], by pressing the measure button [03].
The length of the rst measured side is shown on the third
display line [K].
·Measure the second side of the rectangle, indicated by the
function indicator [D], by pressing the measure button [03].
The length of the second measured side is shown on the second
display line [L]. The result of the calculation, the area, can be
read in the main display line [N].
NOTE
Keep the device as levelled as possible for the most accurate
measurements.
