Gedore 8200-01 Manuale utente
www.gedore.com
06/2017
Operating Instructions
Rotation angle
measurement instrument
8200-01 . 8200-11 . 8200-02
CN
2821273_Bed_DWMG_05/17_V1
Rotation angle measurement instrument
Instrumento de medición de ángulo de rotación
Mesureur d’angle de rotation
Drehwinkel-Messgerät
Draaihoekmeetinstrument
Strumento per la misura dell’angolo di rotazione
Miernika kąta obrotu
Aparelho de medição de ângulo de rotação
Измерения угла поворота
Tork Açı Ölçeri
转角测量仪
www.gedore.com
CN
Operating Instructions (Translation of the German Operating Instructions) 4 - 16
AVOID INJURY.You MUST read and understand these
Operating Instructions before using the product!
Instrucciones de manejo (Traducción de las instrucciones de manejo) 17 - 31
EVITE LESIONES. Usted DEBE leer y entender estas
instrucciones de manjeo antes de usar el el producto!
Instructions d‘emploi (Traduction des instructions d‘emploi) 32 - 46
POUR EVITER LES BLESSURES, vous DEVEZ lire et comprendre
les instructions d‘emploi avant d´utiliser le produit!
Betriebsanleitung (Original-Betriebsanleitung) 47 - 61
VERMEIDEN SIE VERLETZUNGEN. Sie MÜSSEN diese Betriebsanleitung
lesen und verstehen, bevor Sie das Produkt benutzen.
Gebruiksaanwijzing (Vertaling van de gebruiksaanwijzing) 62 - 76
VOORKOM LETSEL. U MOET deze handleiding lezen en begrijpen alvorens
het product in gebruik te nemen.
Istruzioni per l´uso (Traduzione delle istruzioni per l´uso) 77 - 91
EVITARE LESIONI. Leggere e comprendere ASSOLUTAMENTE
le presenti istruzioni per l´uso prima di utilizzare il prodotto.
Instrukcji eksploatacji (Tłumaczenie instrukcji eksploatacji) 92 - 106
Przed rozpoczęciem korzystania z produktu NALEŻY
bezwzględnie przeczytać instrukcji eksploatacji.
Instruções de funcionamento (Tradução das instruções de funcionamento) 107 - 122
EVITE FERIMENTOS. DEVE ler e compreender estas
instruções de funcionamento, antes de utilizar o produto!
Руководство по эксплуатации (Перевод руководства по эксплуатации) 123 - 139
ИЗБЕГАЙТЕ ТРАВМ. Перед использованием изделия НЕОБХОДИМО
прочитать и понять это руководство по эксплуатации.
İşletme kılavuzu (İşletme kılavuzunun tercümesidir) 140 - 152
YARALANMALARDAN KAÇININ. Ürünü kullanmadan önce
bu kullanma kılavuzunu okuyup anlamanız ZORUNLUDUR.
装配说明书 (译自德文原版装配说明书)153 - 162
您必须在使用产品前仔
细阅读和理解本装配说明书
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
4
EN
1. Important Safety Information 5
1.1 Safety and Property Damage
Warnings 6
OVERLOAD HAZARD 7
RISK OF EXPLOSION AND FIRE 7
1.2 Personal Protective Gear 8
1.3 Proper Use 9
1.4 Handling 9
1.5 Work Environment 11
2. Using the rotation angle
measurement instrument 11
2.1 Adjusting the scale value 11
2.2 Torque-controlled tightening
(0-360°) 12
3. Maintenance 15
3.1 Care and Storage 15
4. Environmentally Friendly Disposal 16
5
EN
1. Important Safety
Information
Read and understand this manual
before using the torque gauge.
Incorrect use can cause SERIOUS
INJURY or DEATH.
This manual is part of the torque
gauge. It must be kept in a safe place
for later use and be passed along with
the torque gauge if it is sold, loaned,
or otherwise transferred.
The torque gauge should only be used
by TRAINED USERS who have been
instructed in the safe handling of the
tool. Operation without training can
cause SERIOUS INJURY or DEATH.
Ensure that these Operating
Instructions have been read and
understood prior to the initial use of
the torque gauge.
The Operating Instructions MUST be
available to the user at all times.
6
EN
1.1 Safety and Property Damage
Warnings
Warning information in this user
manual is classified as follows for
clearer distinction:
WARNING
Indicates a hazardous situation which,
if not prevented, could result in death
or serious injury.
Caution
Indicates a hazardous situation which,
if not prevented, can result in minor or
moderate injury.
NOTICE
Indicates a hazardous situation which,
if not prevented, can result in property
damage or in damage to the torque
gauge.
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
7
EN
Note that this symbol is incorporated
into the “Warning” and “Caution”
indicators above.
WARNING
OVERLOAD HAZARD
Both the torque gauge and the torque
wrench can be overloaded during use
and break as a result. This might
cause SERIOUS INJURY or DEATH
Always use original accessory parts
ONLY. When using accessory parts
not approved by the manufacturer
there is also the risk that they will not
bear the loads.
Check the torque gauge for damage
prior to EVERY application.
WARNING
RISK OF EXPLOSION AND FIRE
Sparks can occur when using the
torque gauge, which can cause an
explosion or a fire and might cause
SERIOUS INJURY or DEATH.
8
EN
NEVER use the torque gauge in areas
where sparks can cause explosions or
fires.
1.2 Personal Protective Gear
ALWAYS wear personal protective
gear when using the torque gauge.
The torque gauge or the torque
wrench can slip or break. This might
cause SERIOUS INJURY or DEATH.
ALWAYS wear EYE PROTECTION
(ANSI/ISEA Z87.1-2010) designed to
protect you from flying objects when
using the torque gauge.
PARTICLES may be hurled
upward during work with the torque
gauge. This might cause
SERIOUS INJURY or DEATH.
ALWAYS wear SAFETY GLOVES
when using the torque gauge.
The torque wrench or the torque
gauge can slip or break. This can
cause SERIOUS INJURY to
fingers and hands.
9
EN
ALWAYS wear SAFETY SHOES with
slip-resistant soles and steel toe caps
(ASTM F2413-05) when using the
torque gauge.
Falling parts can cause SERIOUS
INJURY to feet and toes.
1.3 Proper Use
The torque gauge is designed for
controlled torque tightening.
Use the torque gauge for this
application ONLY.
Any other use might cause
SERIOUS INJURY or DEATH.
NEVER allow children to use the
torque gauge.
1.4 Handling WARNING
Always follow the operation manual for
the torque wrench being used.
Take the following safety precautions
to prevent injuries and damage
caused by improper handling and
unsafe use of the torque gauge.
10
EN
Unsafe use can cause SERIOUS
INJURY or DEATH.
NEVER use the torque gauge for
loosening screw connections.
NEVER use a damaged torque
gauge.
NEVER use a torque gauge and
accessory parts that have been
modified.
NEVER modify a torque gauge
and accessory parts.
ALWAYS check the torque gauge,
particularly the square,
as well as the accessory parts,
for visible damage prior to use.
ALWAYS use standard accessory
parts or parts approved by the
manufacturer.
ALWAYS transport the torque
gauge in the shockproof packaging
material.
ALWAYS check the connection
between the tool and the drive of
the torque gauge with a gentle tug.
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
