Geemarc AmpliDECT250 Manuale utente
AmpliDECT250
TM
User Guide p2
Notice d’utilisation p40
Benutzerhandbuch p89
2
Description
Handset/ Base 4
LCD screen 6
Characters List 7
Menu 8
Installation
Connection 9
Batteries setting up 9
Batteries use 9
Using the telephone
On/Off setting 11
Key lock 11
Receiving a call 11
Making a call 12
Hands free mode 13
Last number redial 14
Recalling Recent Numbers 14
Mute function 14
Receiving volume 15
Paging the handset 15
Direct call 15
Index
Handset settings
Ringer setting 16
Key tone setting 16
Silence mode 17
Language setting 17
Time/Date setting 18
User name 18
Personnal Identification Number 19
Emergency number (store & call) 20
Restore factory settings 21
Base settings
Base setting access 22
Tone Dialling Switch over 22
Flash setting 23
Insert pause 23
Personal Identification Number 24
Base Melody 25
Base Volume 25
3
Phone book
Create an entry 26
View entries 26
Delete an entry 27
Clear all entries 27
Modify an entry 28
Caller Display (CID)
Dial from CID list 29
Voice mail and CID list 30
Waiting call indicator 30
Delete entries in CID list 31
Clear all entries 31
Transfer from CID list to phone book 32
Additional handsets /base
Add a new handset 33
Release a registered handset 33
Make an internal call 34
Call transfer between Handsets 34
Conference call 35
Add an extra base 35
Troubleshooting 36
Index
General information
Warranty 38
Recycling instruction 39
4
Description
5
Description
6
Description
In standby mode, handset number, user name (if stored), time and date are all displayed on the LCD
Description
7
When you want to create an entry e.g. name, phone number, you will need to use the keypad. Every
key on the keypad represents a set of letters, numbers and symbols. See the table above.
Use ‘C’ to correct a mistake i.e. clear the last digit entered
Use
*
key to move from uppercase to lowercase
Characters List
8
Note: If you are unsure what to do whilst in the menu system, stop pressing keys and simply wait 30
seconds, the telephone will automatically return to standby mode.
Menu
9
1 - Connection
Connect the line cord plug to the line socket on the base. Connect the other end of the line cord to
the PTT socket. (**)
Plug the power cable into the power socket on the base. Plug the adaptor into
the mains supply. (*)
2 – Battery installation
Install the rechargeable batteries in the handset. The handset requires three Nickel Metal Hydride
(NiMH) AAA batteries. These are supplied with your telephone.
Check the battery polarity diagrams on the handset when inserting the batteries.
Fit the battery cover by sliding the cover on to the back of the handset until it
snaps shut
3- Battery status
Place the handset on the base, a short beep will be heard. The Power/Charging indicator lights up
(red). The battery symbol will be displayed on the handset. Once the handset is fully charged, the
display will show a full battery symbol.
Installation
10
The telephone has an automatic charging control to avoid excessive charging.
Before the handset can be used, the handset batteries must be charged for a
minimum of 15 hours on the base.
Note:
When batteries get low during a call, there will be a warning tone (beep), you
will have to place the handset on the base to recharge
(*) Classified "hazardous voltage" according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
Installation
Indice
Lingue:
Altri manuali Geemarc Telefono
Geemarc
Geemarc combi dect 295 Manuale utente
Geemarc
Geemarc CL610 Manuale utente
Geemarc
Geemarc Dallas 30 Manuale utente
Geemarc
Geemarc Ampli550 Manuale utente
Geemarc
Geemarc CL400 Manuale utente
Geemarc
Geemarc Ampli550 Manuale utente
Geemarc
Geemarc CL10 Manuale utente
Geemarc
Geemarc CL320 Manuale utente
Geemarc
Geemarc MARBELLA Manuale utente
Geemarc
Geemarc APOLLO 10 Manuale utente
Geemarc
Geemarc DALLAS 100 VM Manuale utente
Geemarc
Geemarc Marbella Manuale utente
Geemarc
Geemarc CL555 Manuale utente
Geemarc
Geemarc CL1100 Manuale utente
Geemarc
Geemarc CL595 Manuale utente
Geemarc
Geemarc AmpliCL100 Manuale utente
Geemarc
Geemarc Amplidect Combi 295 Manuale utente
Geemarc
Geemarc CL8350 Istruzioni per il montaggio
Geemarc
Geemarc COMBI DECT 295 Photo Manuale utente
Geemarc
Geemarc BDP400 Manuale utente
