General MMD7003 Manuale utente

MMD7003

USER’S MANUAL

DIGITAL and LED

PRECISION

MOISTURE METER

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

INTRODUCTION:

Congratulations on your purchase of this Digital and LED Precision

Moisture Meter. This unit detects moisture in wood and other building

materials such as brick, wall board, sheet rock, cardboard, paper,

plaster, concrete, and mortar.

FEATURES:

• Designed to check the moisture level of wood, concrete, and

other non-wood material

• Measures from 6% to 40% moisture in wood

• Measures 0% to 100% relative moisture value for concrete and

other non-wood material

• Measurements are shown on Red LED bargraph indicator and

LCD digital display

• All-In-One meter with build-in test pins

• Optional separate probe, available for remote moisture

measurement

• Microprocessor provides high accuracy and advanced features

such as MIN/MAX

• Data Hold feature freezes displayed reading

• Heavy duty and compact housing enhance portability and

durability

• Built-in low battery indicator

SPECIFICATIONS:

PRINCIPAL: Use the 2 pin electrodes to measure the conductive ability

of the species, then it converts to the reading of %

“Moisture of Content”

CIRCUIT: Custom one-chip of microprocessor LSI circuit

DISPLAY: LCD size: 51 mm x 37 mm

Digit size: 16 mm (0.62")

MATERIAL/RANGE:

Material 1: 0 to 100% relative moisture value for concrete and other

non-wood material.

Material 2: 6 % to 40 % moisture range on wood.

RESOLUTION: 0.1 %

ACCURACY: ± (5 % rdg + 5 digits)

@23±5°C

@Material 1: 13% to 100%

@Material 2: 6% to 40%

PROBE: 2 pins moisture electrode

ELECTRODE PIN LENGTH: 0.44" (11mm)

ELECTRODE PIN TYPE: Integrated, replaceable

OPERATING TEMPERATURE: 32º to 122ºF (0°to 50ºC)

OPERATING HUMIDITY: 80% Relative Humidity maximum

MEMORY RECALL: Maximum & Minimum readings can be saved and

viewed

SAMPLING TIME: Approx. 0.8 seconds

POWER SOURCE: “9V” battery

POWER CONSUMPTION: 16mA DC (approx.)

ACCESSORIES INCLUDED: Instruction Manual and 10 pcs. extra of

contact pins

OPTIONAL ACCESSORIES: Separate Probe, (Part #MP7003)

DIMENSIONS: 8.4" x 2.7" 1.2" (216.5 x 68.5 x 29.7mm)

WEIGHT: 8.8 oz. (251g)

FRONT PANEL DESCRIPTION

1. Display

2. Red LED bar graph indicator

3. Power button

4. Hold button

5. REC (MAX/MIN) button

6. Material button

7. Test pins

8. Protection cover

9. Lock nut for test pin

10. Input socket for external

probe

11. Battery compartment/Cover

12. Stand

13. Optional separate probe

OPERATION

CAUTION: The electrode measurement pins are extremely sharp. Use

care when handling this instrument. Cover the pins with the

protective cap when the instrument is not in use.

MEASURING PROCEDURE:

The electrode pins must be inserted before the meter can be used.

To insert or replace the pins refer to the instructions below:

• Remove the protective cap at the top of the unit

• To remove the pins, loosen the locknut at the base of the

electrode pins

• Install the new pins and tighten the locknuts

• Replace the protective cap

OPERATION:

• Remove the protective cap away from the test pins

• Press the POWER button to turn the unit on

• Press the “Material” button to select the desired testing material

Material 1: 0 to 100% relative moisture value for concrete and other

non-wood material. A ‘1’ will display on the bottom right.

Material 2: 6% to 40% moisture range for wood. A ‘2’ will display on

the bottom right.

It is recommended that the test pins are to be inserted to a minimum

depth of 1/8" (.125") into the material under test. If a depth of 1/8"

(.125") can not be obtained, then insert the test pins to their

ma imum achievable depth.

Display will show the moisture contents in “% moisture content”

directly.

Consideration: If the sample test has high moisture content, it may

take a few minutes to obtain a stable reading.

Replace the protective cap when finished.

OTHER FUNCTIONS:

DATA HOLD:

During measurement, push the “HOLD” button. It will hold the display

values and the LCD will show the “D.H” symbol.

To cancel the Data Hold function, press the “HOLD” button again.

DATA RECORD:

This function records the minimum and maximum readings. Press the

“REC” button once to start the Data Record function. The “REC” will be

displayed.

With the “REC” symbol on the display:

Press the “REC” button once and the “REC MAX.” symbol along with

the maximum value will appear in the display. To delete the maximum

value, press the “HOLD” button once. The display will show “REC” and

execute the memory function continuously.

Press the “REC” button again, the “REC MIN” symbol along with the

minimum value will appear on the display. To delete the minimum

value, just press the “HOLD” button once, then the display will show

the “REC” symbol only and execute the memory function continuously.

To exit the memory record function, press the “REC” button for at least

2 seconds. The display will revert to the current reading.

OPTIONAL SEPARATE PROBE:

If intending to use the separate probe to take the moisture

measurement, just prepare the separate probe and connect the probe

plug into the “Input Socket”.

Optional Extendable Probe (MP7003).

1/8"

.125"

MAINTENANCE:

Replacin battery: A low battery is indicated by “LBT” symbol in the

left corner of the display. To replace the battery, remove the battery

cover with a small screwdriver or coin and replace with a new “9V”

battery. Put the battery cover back in place and secure with a

screwdriver or coin.

Replacement of test pins: To replace test pins on the probe, first

loosen the lock nut at the base of the pin, slide pin out and replace

with new pin.

Lock Nut

NOTES

______________________________________________________

MMD7003 User’s Manual

Spec f cat ons subject to change w thout not ce

NOTICE - WE ARE NOT RESPONSIBLE

FOR TYPO RAPHICAL ERRORS.

MAN#MMD7003 7/08

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Indice

Altri manuali General Strumento di misura

General

General EP8710 Manuale utente

General

General CT6235B Manuale utente

General

General MM70D Manuale utente

General

General DAF3010B Manuale utente

General

General DSM403SD Manuale utente

General

General LDM60 Manuale utente

General

General TA500 Manuale utente

General

General MMD900 Manuale utente

General

General VOC08 Istruzioni per il montaggio

General

General DTH3007SD Manuale utente

General

General DLAF930S Manuale utente

General

General MMD950 Manuale utente

General

General PTH8708 Manuale utente

General

General MMD8P Manuale utente

General

General MM70 Manuale utente

General

General XL1G Manuale utente

General

General DSMM600 Manuale utente

General

General EMF1394DL Manuale utente

General

General MM1E Manuale utente

General

General DAF3012M Manuale utente

General

General LM30 Manuale utente

General

General DT4208SD Manuale utente

General

General DAMP60 Manuale utente

General

General PTH8707 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente