BlueConnect
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0 Fax: -58080-11 Page 3 / 26
www.go-sys.de info@go-sys.de
Table of Contents
1 Introduction ....................................................................................................................................................................................................3
2 Description of the BlueConnect Modules ......................................................................................................................................................3
2.1 System Setup Examples..........................................................................................................................................................................4
3 Technical Data and Connections...................................................................................................................................................................5
3.1 Opening the Module Housing.................................................................................................................................................................5
3.2 Cable Connections, Switch Positions and LEDs ....................................................................................................................................6
3.3 PIN Assignment .......................................................................................................................................................................................9
3.4 PIN Assignment CAN bus at the BlueBox ...............................................................................................................................................9
4 Configuring the BlueConnect Modules with the Program Modbus Tool.exe............................................................................................10
4.1 Preparation ...........................................................................................................................................................................................10
4.2 Title Bar and Menu Bar.........................................................................................................................................................................11
4.3 The Start Window (Modbus Connection) .............................................................................................................................................11
4.4 The Info Window....................................................................................................................................................................................12
4.5 The Calibration Window .......................................................................................................................................................................12
4.5.1 The Calibration Table....................................................................................................................................................................13
4.6 The Measurement Value Window.........................................................................................................................................................13
4.7 The Measurement Value Recording Window ......................................................................................................................................14
4.8 Configuring the Sensor Modules ..........................................................................................................................................................15
4.8.1 The Parameter Window ................................................................................................................................................................15
4.8.2 The Calibration Window O2 ..........................................................................................................................................................16
4.9 Configuring the Current Input Module.................................................................................................................................................17
4.10 Configuring the Current Output Module............................................................................................................................................18
4.11 Configuring Older Bus Modules..........................................................................................................................................................19
5 Modbus Address Overview of the Sensor Modules......................................................................................................................................20
Appendix A – Interior Cover Stickers...............................................................................................................................................................24
Appendix B – EU Declaration of Conformity...................................................................................................................................................26
1 Introduction
This manual describes the BlueConnect Modules of GO Systemelektronik. BlueConnect Modules are available
in four basic variants: as Sensor Module, Bus Module, Current Module and RS232 Module. At the completion of
this manual, the following types of design were available:
Sensor Modules Article No. Bus Module Article No.
Oxygen + Temp. 486 C000-4 486 C000-MOD
pH + Temp. 486 C000-5
ISE + Temp. 486 C000-7 Bus Module Turbidity Article No.
ORP (Redox) + Temp. 486 C000-9 (Turbidity flow through) 486 C000-Turb
Current Modules Article No. RS232 Module Article No.
Current Input 486 C000-mAI 486 C000-RSXX
Current Output 486 C000-mAO The type of version can be found on the sticker on
the front of the housing or via the article number on
the right-
the housing.
The
products of GO Systemelektronik are constantly
being developed, therefore deviations between this
manual and the delivered product can result. Please
understand that no legal claims can be derived from
the contents of this manual.
