GoMax Electronics MX-3004F Manuale utente

3G/HD/SD-SDI Quad-view Video

Processor

User Manual

rev: 150818

Made in Taiwan

MX-3004F

Safety and Notice

The MX-3004F 3G/HD/SD-SDI Quad-view Video Processor has been tested for conformance to

safety regulations and requirements, and has been certified for international use. However, like all

electronic equipments, the MX-3004Fshould be used with care. Please read and follow the safety

instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device

before cleaning.

TABLE OF CONTENTS

INTRODUCTION.................................................................................................................1

FEATURES.........................................................................................................................1

PACKAGE CONTENTS ......................................................................................................1

SPECIFICATIONS ..............................................................................................................2

PANEL DESCRIPTIONS.....................................................................................................3

HARDWARE INSTALLATION.............................................................................................4

CONNECTION DIAGRAM...................................................................................................5

OPERATION SOFTWARE..................................................................................................6

WARRANTY......................................................................................................................14

INTRODUCTION

The MX-3004F 3G/HD/SD-SDI Quad-view Video Processor is an advanced video processor for

multimedia presentations. It is an ideal solution for some application such as broadcasting, where up to

four SDI video signals must be displayed on a single display. It supports up to 4 SDI video inputs, of which

four can be outputted simultaneously with the desired display layout through software control, IR remote

or front panel. The advanced video processor allows you to manipulate output images, wherever

positions and whatever sizes you want for viewing four computers or four video signals or a combination.

The embedded processor converts signals from input sources to match the native resolution of

monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA

(1920x1200). Dual outputs are provided in both digital (SDI) and digital (DVI) format, one is connected to

remote display and other is connected to on-site display for real time monitoring.

FEATURES

●Supports 3G/HD/SD-SDI video formats

●Input resolutions support interlaced or progressive video under SMPTE

●Dual outputs DVI (640x480 to 1920x1200) / SDI (720P, 1080P)

●Each SDI input channel has 1 re-clocked SDI loop-outs

●Adjustable size & position through software, IR remote and front panel

●Image parameters and layouts are automatically saved in flash memory and can be recalled for later

use

●User-selectable output settings, up to 1920x1200 (Only for DVI)

●Perfect as a video screen splitter, a video converter and a video switcher

●Firmware upgradable for support of new features and technology enhancements

●Software control through RS-232 or IP port.

●Control protocol available for customer proprietary design

●1U size

PACKAGE CONTENTS

●1x MX-3004F

●1x USB to RS-232 cable

●2x 1U rack mounting-ear

●1x Installation software CD

●1x UL 12V 5A power adapter

●1x UL AC power cord

●1x User Manual

●1x IR remote control (28 keys)

SPECIFICATIONS

Model Name

MX-3004F

Technical

Role of usage

Multiplexer / video processor

Dual output support

Yes [DVI &SDI]

Background video input

Video bandwidth

DVI/HDMI [165MHz]

SDI 3G/HD/SD

Video input support

480i / 576i / 720p / 1080i / 1080p

Input TMDS signal

1.2 Volts [peak-to-peak]

ESD protection

Human body model — ±12kV [air-gap discharge] & ±8kV [contact discharge]

PCB stack-up

4-layer board [impedance control — differential 100Ω; single 50Ω]

Input

4x SDI

Output

2x SDI + 1x DVI/HDMI

RS-232 connector

DE-9 [9-pin D-sub female]

DVI connector

DVI-I [29-pin female]

RJ-45 connector

WE/SS 8P8C

Rotary switch

Yes

DIP switch

Yes (for factory reset and firmware update)

Mechanical

Housing

Metal enclosure

Dimensions

[L x W x H]

Model

440 x 235 x 44mm [1'4” x 9.3” x 1.7”]

Package

526 x 318 x 156mm [1'7" x 12.5" x 6.1"]

Carton

543 x 335 x 344mm [1'8" x 13.2" x 1'1"]

Weight

Model

2.6kg [5.8 lbs]

Package

3.7kg [ 8.2lbs]

Fixedness

1U rack-mounting case with ears

Power supply

12V 5A DC

Power consumption

35 Watts (max)

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Front Panel

1. Output Resolution Button: Select output resolution

2. Label Button: Window’s label ON/OFF

3. Custom Layout 1-8: Save custom layout button

4. IR Sensor: IR sensor for receiving the IR commands from IR remote

5. Default Layout mode A: Select default layout ( ) or custom layout

6. Default Layout mode B: Select default layout ( , , , )

7. Input 1-4 Select Button: Select input source

Rear Panel

8. Power Switch: Power On/Off

9. RS-232: RS-232 control port

10. +12V DC: Connect to the +12VDC power supply unit.

11. Dip Switch: Switch the firmware update mode or factory reset mode (Switch ON)

12. Device ID: To identify between units

13. Mini-USB: For firmware update

14. Ethernet: Ethernet control port.

15. Outputs: 2 SDI outputs

16. Outputs: DVI output

17. Input 1-4: SDI inputs 1-4

18. SDI local loop out

HARDWARE INSTALLATION

Safety Precautions

1. To prevent fire or shock hazards, do not expose this device to rain or moisture.

2. The product should be placed more than one foot away from heat sources such as radiators, heat

registers, stoves, and other products (including amplifiers) that produce heat. In addition, do not cover

any material or devices on the top of the device.

3. Do not use immediately after moving from a low temperature to high temperature, as this causes

condensation.

4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious

injury to a child or adult and serious damage to the product.

5. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6. Do not allow the same still picture to be projected for a long time or an abnormally bright video picture

to be projected. The video image could be burned in to the display device.

Installation Procedures

Unpacking

Remove the MX-3004F from the shipping container and examine it for any signs of shipping

damage or missing items (check with package contents above). All shipping items should be saved if the

product is to be moved or returned for service. Shipping unit back to dealers for service not in the original

box may result in voiding warranty or additional cost.

Placement

The unit uses convection to cool. A fan is not needed, so do not block the sides of this device or

stack another device on the top or bottom of the MX-3004F.

Connections

We recommend the highest quality cables for both input and output connections.

1. Switch off the MX-3004F and all devices that you want to connect.

2. Connect a monitor, a projector or other displays that comes with DVI / SDI inputs

3. Connect a device equipped with SDI output including SD/HD/3G to the BNC input connector of

MX-3004F.

4. Connect your computer with the MX-3004F by a 9-pin RS-232 cable or Cat.5e cable, and then install

the software.

5. Plug in AD power cord into AC power socket.

6. Execute the control software and establish the connection between PC/Laptop and MX-3004F.

7. For detailed software control operation, please refer to the software instruction section.

CONNECTION DIAGRAM

OPERATION SOFTWARE

Method A: IR Remote Control

Button

Function

Label

Border & Label on/off

Analog Clock

Analog Clock on/off

Digital Clock

Digital Clock on/off

Power on/off the device

Custom layout 1

Custom layout 2

Custom layout 3

Custom layout 4

Custom layout 5

Custom layout 6

Custom layout 7

Custom layout 8

PAP 1 Default layout PAP

PAP 2 Default layout PAP

PAP 3 Default layout PAP

PAP 4 Default layout PAP

Full Screen layout 1

Full Screen – Window 1

Full screen layout 2

Full Screen - Window 2

Full screen layout 3

Full Screen - Window 3

Full screen layout 4

Full Screen - Window 4

Method B: Software Control through RS-232 port / Ethernet port

System Requirement and Precautions

1. The device provides a software control program, Quartet, which runs under Microsoft

Windows 98, 2000, XP, Vista or 7 through the interface of RS-232 serial control.

2. Before you click the icon of the software, make sure you have secured the connection

between your computer COM port and the device and switched on the device with green LED

light.

Start the Operation Software

When you double-click the .exe file, the below dialog will pop-up. Connect the software via

RS-232 or TCP/IP.

*under Microsoft Windows 7, please right click the program icon to start up as an administrator

RS-232 mode: Use RS-232 to connect the port on device and computer. Select correct serial

COM port (Port Number) and click the Connect button.

Ethernet (TCP/IP) mode: Enter the device IP address and click the Connect button.

After the software control setting is completed, it will enter directly to control interface.

Control Interface

1. PAP Panel

Display and adjust the window size and position.

Control percent: 10~100% to set the PAP panel display/control

size.

Stretch: Fix the size ratio when the window is resizing.

PAP mode

Window 1 in full screen

Window 2 in full screen

Window 3 in full screen

Window 4 in full screen

Indice

Altri manuali GoMax Electronics Convertitore multimediale

GoMax Electronics

GoMax Electronics SP-2003 Manuale utente

GoMax Electronics

GoMax Electronics MT-503A Manuale utente

GoMax Electronics

GoMax Electronics CV-513ZK-BI Manuale utente

GoMax Electronics

GoMax Electronics MX-5004MZ2-UF Manuale utente

GoMax Electronics

GoMax Electronics MX-5004MZ2F Manuale utente

GoMax Electronics

GoMax Electronics MX-5022 Manuale utente

GoMax Electronics

GoMax Electronics CV-910S Manuale utente

GoMax Electronics

GoMax Electronics MX-5004MZ2E-CF Manuale utente

GoMax Electronics

GoMax Electronics CV-523 Manuale utente

GoMax Electronics

GoMax Electronics CV-105S Manuale utente

GoMax Electronics

GoMax Electronics CV-305MLR Manuale utente

GoMax Electronics

GoMax Electronics CV-300 Manuale utente

GoMax Electronics

GoMax Electronics CV-53A Manuale utente

GoMax Electronics

GoMax Electronics MX-1010 Manuale utente

GoMax Electronics

GoMax Electronics SP-9112 Manuale utente

GoMax Electronics

GoMax Electronics VW-1404ZH-G Manuale utente

GoMax Electronics

GoMax Electronics CV-503M Manuale utente

GoMax Electronics

GoMax Electronics CV-35AK Manuale utente

GoMax Electronics

GoMax Electronics SP-5008PZ Manuale utente

GoMax Electronics

GoMax Electronics VW-1312P Manuale utente

GoMax Electronics

GoMax Electronics CV-900S Manuale utente

GoMax Electronics

GoMax Electronics CV-509 Manuale utente

GoMax Electronics

GoMax Electronics MX-1004PF Manuale utente

GoMax Electronics

GoMax Electronics MX-3004 Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente