Grandstream Networks UCM630X Manuale utente
Grandstream Networks，Inc.
UCM630X Series IP PBX
Remote Work Environment Setup Guide
P a g e | 2
Table of Contents
OVERVIEW..................................................................................................................... 4
SIP SIGNALING TRAVERSAL ....................................................................................... 5
MEDIA TRAVERSAL ...................................................................................................... 9
CONFIGURING FOR WAVE......................................................................................... 12
P a g e | 3
Table of Figures
Figure 1: SIP Signaling Penetration - UDP Port ...........................................................................................5
Figure 2: SIP Signaling Penetration - TCP/TLS Port ....................................................................................6
Figure 3: SIP Signaling Penetration - NAT Settings......................................................................................7
Figure 4: RTP Settings – RTP/BFCP Ports...................................................................................................9
Figure 5: SIP Settings - STUN/TURN Server .............................................................................................10
Figure 6: HTTP Server - Wave Settings......................................................................................................12
Table of Tables
Table 1: NAT Settings....................................................................................................................................7
Table 2: RTP Settings..................................................................................................................................10
Table 3: Wave Settings................................................................................................................................12
P a g e | 4
OVERVIEW
Thank you for purchasing the UCM630X Series IPPBX. The Grandstream UCM6300 Series IPPBX is based
on Asterisk 16 and provides powerful features, a user-friendly interface for remote management, and a
scalable all-in-one communication solution for enterprises of all sizes. Offering up to 3000 extensions, PBX
features such as audio/video calling and conferencing, video surveillance support, PBX data management
and statistics, and remote device access and management via UCM RemoteConnect, it is the perfect
solution to improve communication efficiency and productivity.
The UCM630X Series IPPBX offers UCM RemoteConnect, a service which allows users to quickly set up
remote communication and management using Grandstream Wave. Grandstream Wave is a multi-platform
application available on web browsers, Windows, macOS, Android, and iOS that supports calling,
conferencing, extension management, system alert event monitoring, call/meeting reports, cloud storage
access, and more.
UCM RemoteConnect is highly recommended for easy-to-use, secure, and stable network traversal. If UCM
RemoteConnect is not used, users can use this guide to set up their remote work environments with the
UCM630X. This guide has three sections:
•SIP Signaling Traversal
•Media Traversal
•Configuring for Wave
P a g e | 5
SIP SIGNALING TRAVERSAL
To allow successful SIP registration and call establishment, users will need to configure SIP signaling NAT
traversal by associating their private local network addresses and ports with their public addresses and
ports. To do so, please see the following steps:
Step 1: From the UCM630X web UI, users can retrieve or modify their internal UDP port from the PBX
Settings -> SIP Settings -> General page. In the same section, the TCP/TLS ports can be found in the
TCP/TLS tab. Please see the figures below:
Figure 1: SIP Signaling Penetration - UDP Port
P a g e | 6
Figure 2: SIP Signaling Penetration - TCP/TLS Port
Step 2: Once the internal port information has been confirmed, users can then map them to the
corresponding external ports on the router.
Example: If the internal UDP port is 5060, users would map port 5060 to whatever is designated as the
external UDP port for SIP traffic on the router. Please contact your enterprise’s IT administrator for this
information.
Note:
1. For security purposes, it is not recommended to use an external port number that is the same as
the internal port number.
2. If the router supports SIP ALG, it will need to be disabled.
Step 3: Configure NAT settings as shown in the figure below:
P a g e | 7
Figure 3: SIP Signaling Penetration - NAT Settings
•Configure External Host with the public network address of the UCM630X.
•Configure the External UDP Port, External TCP Port, and/or External TLS Port fields based on the
router mappings created in the previous step.
•Configure Local Network Address with the UCM630X’s local network subnets.
Table 1: NAT Settings
NAT Settings
External Host
Configure the IP address or domain that would be used in outbound SIP
messages if the UCM is behind a NAT. Typically, this would be the public network
address.
Use IP Address in
SDP
If enabled, the SDP connection will use the IP address resolved from the external
host.
Get External IP via
STUN
If enabled, the external IP address will be retrieved via STUN. Please confirm the
configured STUN server is working properly.
External UDP Port
Configure the externally mapped UDP port when the UCM is behind a static NAT
or PAT.
External TCP Port
Configure the externally mapped TCP port when the UCM is behind a static NAT
or PAT.
P a g e | 8
External TLS Port
Configure the externally mapped TLS port when the UCM is behind a static NAT
or PAT. The default setting is 5061.
Local Network
Address
Configure a list of subnets under the internal network. Multiple entries are
supported. This must be configured for successful NAT traversal.
Example:
192.168.0.0/16
If properly configured, users can then register their extensions to the UCM630X’s public network address
and port. If one-way audio issues are encountered, please confirm your NAT settings (SIP signaling
traversal) and SIP/RTP ports (media traversal) on the UCM and/or router. For details about media
traversal configuration, please see the Media Traversal section below.
P a g e | 9
MEDIA TRAVERSAL
To ensure correct audio and video exchange between call parties on different networks, proper media
traversal configurations are required. For IP endpoints, users will need to configure RTP and BFCP port
mappings. For Wave, users will need to configure STUN and TURN server settings instead. Please see the
following steps:
Step 1: From the UCM630X Web UI, navigate to the PBX Settings -> RTP Settings page as shown in the
figure below:
Figure 4: RTP Settings – RTP/BFCP Ports
Step 2 (for IP endpoints): Confirm the starting and ending ports for RTP and BFCP.
P a g e | 10
•For proper audio/video exchange, create an RTP port range mapping on your router. From the
figure above, this would be 10000-20000.
•For proper presentation sharing, create a port range mapping on your router. From the figure
above, this would be 53000-55999.
Step 3 (for Wave): Configure the STUN and TURN server settings as highlighted in the figure below.
Without UCM RemoteConnect, users would need to confirm their own STUN/TURN server information.
Figure 5: SIP Settings - STUN/TURN Server
Table 2: RTP Settings
RTP Settings
RTP Start
Configure the starting RTP port. Default is 10000.
Altri manuali per UCM630X
3
Indice
Altri manuali Grandstream Networks Centralino
Grandstream Networks
Grandstream Networks UCM6 series Manuale utente
Grandstream Networks
Grandstream Networks UCM6510 Manuale utente
Grandstream Networks
Grandstream Networks UCM6102 Manuale utente
Grandstream Networks
Grandstream Networks GXE502X Manuale utente
Grandstream Networks
Grandstream Networks UCM6300 Series Manuale utente
Grandstream Networks
Grandstream Networks UCM6100 Series Manuale utente
Grandstream Networks
Grandstream Networks GXE5024 Manuale utente
Grandstream Networks
Grandstream Networks UCM6100 Series Manuale utente
Grandstream Networks
Grandstream Networks UCM6 series Manuale utente
Grandstream Networks
Grandstream Networks UCM6108 Manuale utente
Grandstream Networks
Grandstream Networks UCM6 series Manuale utente
Grandstream Networks
Grandstream Networks DP715 Manuale utente
Grandstream Networks
Grandstream Networks UCM6 series Manuale utente
Grandstream Networks
Grandstream Networks UCM6510 Manuale utente
Grandstream Networks
Grandstream Networks UCM6102 Manuale utente
Grandstream Networks
Grandstream Networks UCM630 Series Manuale utente
Grandstream Networks
Grandstream Networks UCM6202 Manuale utente
Grandstream Networks
Grandstream Networks UCM6200 Series Manuale utente
Grandstream Networks
Grandstream Networks UCM6510 Manuale utente
Grandstream Networks
Grandstream Networks UCM P800 Manuale utente
