H3C S5830V2 series Manuale utente

H3C S5830V2 & S5820V2 Switch Series

TRILL

Configuration Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: 6W100-20160130

Document version: Release 2422P01

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE,Aolynk, , H3Care, , IRF, NetPilot, Netflow, SecEngine,

SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of Hangzhou H3C

Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Preface

The H3C S5830V2 & S5820V2 documentation set describes the software features for the H3C

S5830V2 & S5820V2 Switch Series and guide you through the software configuration procedures.

These guides also provide configuration examples to help you apply software features to different

network scenarios.

The TRILL Configuration Guide describes the background, fundamentals, and configuration of

TRILL.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•About the H3C S5830V2 & S5820V2 documentation set

•Obtaining documentation.

•Technical support.

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the H3C S5830V2 & S5820V2 switch series.

Conventions

This section describes the conventions used in the documentation.

Port numbering in examples

The port numbers in the documentation are for illustration only and might be unavailable on your

device.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

Convention Description

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION: An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT: An alert that calls attention to essential information.

NOTE: An alert that contains additional or supplementary information.

TIP: An alert that provides helpful information.

Network topology icons

Convention Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Convention Description

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security card, such as a firewall, load balancing, NetStream, SSL VPN,

IPS, or ACG card.

About the H3C S5830V2 & S5820V2

documentation set

The H3C S5830V2 & S5820V2 documentation set includes the following categories of documents:

Category Documents Purposes

Hardware specifications

and installation

Compliance and safety

manual

CE DOC

Provides regulatory information and the safety

instructions that must be followed during

installation.

Quick start Guides you through initial installation and setup

procedures to help you quickly set up and use your

device with the minimum configuration.

Installation guide Provides a complete guide to hardware installation

and hardware specifications.

Fan assemblies

installation manual

Describes the appearance, specifications, and

installation and removal of hot-swappable fan

assemblies.

Power modules user

manual

Describes the appearance, specifications, and

installation and removal of hot-swappable power

modules.

Pluggable transceiver

modules installation

guide

Guides you through installing SFP/SFP+/QSFP+

transceiver modules.

Pluggable modules

manual

Describes the hot-swappable modules available for

the H3C switches, their external views, and

specifications.

Software configuration Configuration guides Describe software features and configuration

procedures.

Command references Provide a quick reference to all available

commands.

Operations and MIB Companion Describes the MIBs for the software release.



Category Documents Purposes

maintenance

Release notes

Provide information about the product release,

including the version history, hardware and

software compatibility matrix, version upgrade

information, technical support information, and

software upgrading.

Obtaining documentation

Access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the following links to obtain different categories of product documentation:

[Technical Documents]—Provides hardware installation, software upgrading, and software feature

configuration and maintenance documentation.

[Products & Solutions]—Provides information about products and technologies, as well as solutions.

[Software Download]—Provides the documentation released with the software version.

Technical support

service@h3c.com

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Configuring TRILL··························································································· 1

Overview ····························································································································································1

Basic concepts ···········································································································································1

TRILL frame formats ··································································································································1

How TRILL works·······································································································································2

TRILL forwarding mechanisms ··················································································································3

Ping TRILL and tracert TRILL ····················································································································5

Protocols and standards ····························································································································7

Configuration restrictions and guidelines ···········································································································7

TRILL configuration task list·······························································································································8

Enabling TRILL ··················································································································································9

Configuration restrictions and guidelines ···································································································9

Configuration procedure···························································································································10

Configuring the system ID and nickname for an RB ························································································10

Configuring the link type of a TRILL port ·········································································································10

Configuration procedure···························································································································11

Configuring the DRB priority of a TRILL port ···································································································11

Configuring the link cost for a TRILL port ········································································································11

Configuring announcing VLANs and the designated VLAN·············································································12

Configuring TRILL timers ·································································································································13

Configuring TRILL LSP parameters and features····························································································13

Setting TRILL LSP parameters ················································································································13

Enabling TRILL LSP fast advertisement ··································································································15

Enabling TRILL pseudonode bypass ·······································································································15

Setting the SPF algorithm parameters·············································································································16

Configuring TRILL distribution trees ················································································································16

Setting basic distribution tree parameters································································································16

Enabling TRILL distribution tree multithread calculation ··········································································17

Enabling load balancing over TRILL distribution trees·············································································17

Configuring TRILL ECMP routes ·····················································································································18

Enabling incremental flush for TRILL multicast routing entries ········································································18

Enabling logging of TRILL neighbor changes ··································································································19

Configuring SNMP for TRILL ···························································································································19

Enabling TRILL to forward traffic from EVB S-channels ··················································································20

Configuring TRILL GR ·····································································································································20

Associating a TRILL port with a track entry ·····································································································21

Using ping TRILL and tracert TRILL to test network connectivity ····································································21

Displaying and maintaining TRILL ···················································································································22

TRILL configuration example ···························································································································22

Network requirements ······························································································································22

Configuration procedure···························································································································23

Verifying the configuration························································································································25

Index ············································································································· 27

Configuring TRILL

TRansparent Interconnection of Lots of Links (TRILL) uses IS-IS to provide transparent Layer 2

forwarding.

TRILL requires a license. For information about feature licensing, see Fundamentals Configuration

Guide.

Overview

TRILL combines the simplicity and flexibility of Layer 2 switching with the stability, scalability, and

rapid convergence capability of Layer 3 routing. All these advantages make TRILL very suitable for

large flat Layer 2 networks in data centers.

Basic concepts

•RBridge—Routing bridge (RB) that runs TRILL. RBs are classified into ingress RBs, transit

RBs, and egress RBs, depending on their positions in the TRILL network. A frame enters the

TRILL network through an ingress RB, travels along transit RBs, and leaves the TRILL network

through an egress RB, as shown in Figure 2.

•TRILL network—A Layer 2 network comprised of RBs, as shown in Figure 3.

•System ID—Unique identifier of an RB in the TRILL network. The system ID is 6-byte.

•Nickname—Address of an RB in the TRILL network. The nickname is 2-byte.

•Link State Database—The LSDB contains all link state information in the TRILL network.

•Link State Protocol Data Unit—An LSP describes local link state information and is

advertised between neighbor devices.

•Designated Routing Bridge (DRB)—Similar to the designated IS (DIS) in IS-IS, a DRB exists

in a broadcast network. It helps simplify network topology, and assigns AVFs and appointed

ports for the VLANs on each RB in the broadcast network.

•Appointed VLAN-x Forwarder (AVF) and appointed port—To avoid loops, TRILL requires all

traffic of a VLAN on a broadcast network to enter and leave the TRILL network through the

same port of an RB. The RB is the VLAN's AVF, and the port is the VLAN's appointed port.

For more information about LSDB, LSPDU, and DIS, see Layer 3—IP Routing Configuration Guide.

TRILL frame formats

TRILL frames include protocol frames and data frames.

TRILL protocol frames include TRILL Hello, LSP, CSNP, PSNP, MTU-probe, and MTU-ack. These

protocol frames use 802.1Q encapsulation and have a fixed destination multicast address

0180-C200-0041.

TRILL data frames have a specific format, as shown in Figure 1. A TRILL header and an outer

Ethernet header are added to the original Ethernet frame.

Figure 1 TRILL data frame format

Table 1 describes the fields in the TRILL header.

Table 1 TRILL header fields

Field Description

Ethertype The Ethertype is fixed to TRILL.

V Version number, which is 0. When an RB receives a TRILL frame, it checks the V

field and drops the frame if the Vfield is not 0.

R Reserved for future extension. An ingress RB sets the R field to 0when adding a

TRILL header. Transit RBs and egress RBs ignore the field.

Multidestination attribute:

•0—Known unicast frame.

•1—Multidestination frame (multicast, broadcast, or unknown unicast

frame).

Op-Length Length of the Options field. 0indicates that the Options field does not exist.

Hop Count Hop count, which is used to avoid loops. An RB drops a TRILL frame whose hop

count is decremented to 0.

Egress RB Nickname Nickname of the egress RB.

Ingress RB Nickname Nickname of the ingress RB.

Options Options field. This field exists when the Op-Length field is non-zero.

How TRILL works

TRILL establishes and maintains adjacencies between RBs by periodically advertising Hello frames,

distributes LSPs among RB neighbors, and generates an LSDB for all RBs in the network. Based on

the LSDB, each RB uses the SPF algorithm to calculate forwarding entries destined to other RBs.

TRILL forwarding mechanisms

Different types of frames are forwarded by using different forwarding mechanisms. The following

sections describe these mechanisms.

Unicast frame forwarding mechanism

As shown in Figure 2, a unicast frame is forwarded as follows:

1. When a unicast frame enters the TRILL network, the ingress RB encapsulates the original

Ethernet frame with the following headers:

2. A TRILL header (similar to an IP header).

3. An outer Ethernet header (similar to the Ethernet header of a regular Ethernet frame).

4. RBs forward the frame hop by hop according to the egress RB nickname in the TRILL header in

the same way routers forward IP packets. Each hop replaces the outer Ethernet header with an

appropriate outer Ethernet header, and decrements the hop count in the TRILL header.

5. Upon receiving the TRILL frame, the egress RB de-encapsulates it to obtain the original

Ethernet frame, and sends the frame to the target device.

Figure 2 Unicast frame forwarding flow

The outer Ethernet header enables traditional Ethernet switches to forward TRILL frames and

connect RBs.

Multidestination frame forwarding mechanism

In a TRILL network, RBs perform the following tasks:

•Compute a TRILL distribution tree for each VLAN based on the LSDB.

•Guide the forwarding of multidestination frames in each VLAN by using its TRILL distribution

tree.

As shown in Figure 3, when a multicast frame from VLAN 10 enters the TRILL network, RB 1, which

is an ingress RB, encapsulates the multicast frame into a TRILL frame. In the frame, the egress RB is

RB 2, the root bridge of the TRILL distribution tree for VLAN 10. When the frame arrives at the root

bridge, it is distributed throughout the TRILL distribution tree. Then, the TRILL frame is

VLAN 10 VLAN 200 VLAN 300 VLAN 10

Ingress RB

RB 1

S1 S2

Ethernet frame TRILL frame TRILL frame Ethernet frame

Egress RB

RB 3

Transit RB

RB 2

Ingress RB = RB 1

Outer VLAN = 200

Egress RB = RB 3

Outer S-MAC = RB 1

Outer D-MAC = RB 2

Payload

Inner VLAN = 10

Inner S-MAC = S1

Inner D-MAC = S2

Ingress RB = RB 1

Outer VLAN = 300

Egress RB = RB 3

Outer S-MAC = RB 2

Outer D-MAC = RB 3

Payload

Inner VLAN = 10

Inner S-MAC = S1

Inner D-MAC = S2

Payload

Inner VLAN = 10

Inner S-MAC = S1

Inner D-MAC = S2

Payload

Inner VLAN = 10

Inner S-MAC = S1

Inner D-MAC = S2

Unicast frame

Altri manuali per S5830V2 series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali H3C Interruttore

H3C

H3C S5120-SI Series Manuale utente

H3C

H3C S3100-52P Istruzioni per l'installazione

H3C

H3C S5500-SI Series Manuale utente

H3C

H3C WX3000 Series Manuale utente

H3C

H3C S3100 Series Istruzioni per l'installazione

H3C

H3C S12500 Series Manuale di servizio

H3C

H3C S12500 Series Manuale utente

H3C

H3C S9820-8C-SAN Manuale utente

H3C

H3C S6520X-EI Series Manuale utente

H3C

H3C PSR450-12A Manuale utente

H3C

H3C S5500-EI series Manuale utente

H3C

H3C S7500 Series Manuale utente

H3C

H3C S5800-EI Series Manuale operativo e di manutenzione

H3C

H3C S5500-EI series Istruzioni per l'installazione

H3C

H3C S5500-HI Switch Series Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S9500 Series Istruzioni per l'installazione

H3C

H3C S7500 Series Istruzioni per l'installazione

H3C

H3C S6800 Series Manuale di installazione

H3C

H3C S12500 Series Manuale utente

H3C

H3C S5500-SI Series Manuale utente

H3C

H3C H3C S7500E Series Manuale di installazione

H3C

H3C S6890-54HF Manuale operativo e di manutenzione

H3C

H3C S3100 Series Istruzioni per l'installazione

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente