H3C S9500 Series Istruzioni per l'installazione

H3C S9500 Series Routing Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08194S-20081225-C-1.24

Product Version: S9500-CMW310-R1648

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

Technical Support

customer_service@h3c.com

http://www.h3c.com

About This Manual

Organization

H3C S9500 Series Routing Switches Command Manual is organized as follows:

Part Contents

00 Feature List and

Command Index includes Feature List and Command Index.

01 Access Volume

includes Ethernet Port Commands, POS Port

Configuration Commands, Link Aggregation

Configuration Commands, Port Isolation Configuration

Commands, VLAN Commands, MAC Address Table

Management Commands, GVRP Commands, QinQ

Commands, Port Loopback Detection Commands,

DLDP Commands, Ethernet OAM Commands, Smart

Link and Monitor Link Commands, MSTP Commands,

BPDU Tunnel Commands, HVRP Commands, RRPP

Commands and RPR Commands.

02 IP Services Volume

includes ARP Commands, IP Address Commands,

VRRP Commands, DHCP Commands, DNS

Commands, UDP Helper Commands, NAT Commands,

IP Performance Commands and URPF Commands.

03 IP Routing Volume

includes Static Route Commands, RIP Commands,

OSPF Commands, ISIS Commands, BGP Commands,

Routing Policy Commands, Route Capacity

Configuration Commands and Recursive Routing

Commands.

04 IP Multicast Volume

includes Common Multicast Configuration Commands,

IGMP Snooping Configuration Commands, IGMP

Configuration Commands, PIM Commands, Multicast

VLAN Commands, MSDP Commands and MBGP

Commands.

05 MPLS VPN Volume includes MPLS Commands, MPLS VLL Commands,

MPLS VPLS Commands, MPLS L3VPN Commands

and MPLS OAM Commands.

06 QoS ACL Volume includes QoS Commands and ACL Commands.

07 Security Volume

includes Protocol Port Security Commands, 802.1x

Commands, AAA RADIUS HWTACACS Commands,

Password Control Commands, SSH Commands, IDS

Linkage Commands, Portal Commands, VBAS

Commands and Traffic Accounting Commands.

Part Contents

08 System Volume

includes Command Line Interface Commands, Login

and User Interface Commands, FTP and TFTP

Commands, HA Commands, NQA Commands,

NetStream Commands, NTP Commands, RMON

Commands, SNMP Commands, Packet Statistics

Accounting Commands, Device Management

Commands, Configuration File Management

Commands, File System Management Commands,

Cluster Management Commands, System Maintenance

and Debugging Commands, Information Center

Commands, PoE Commands, Clock Module

Commands, ACSEI Server Commands, and OAP

Module Commands.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

&<1-n> The argument(s) before the ampersand (&) sign can be

entered 1 to n times.

# A line starting with the # sign is comments.

II. GUI conventions

Convention Description

< > Button names are inside angle brackets. For example, click

<OK>.

[ ] Window names, menu items, data table and field names

are inside square brackets. For example, pop up the [New

User] window.

/ Multi-level menus are separated by forward slashes. For

example, [File/Create/Folder].

III. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Related Documentation

In addition to this manual, each H3C S9500 Series Routing Switches documentation

set includes the following:

Manual Description

H3C S9500 Series Routing

Switches Installation Manual

It introduces the installation procedure,

commissioning, maintenance and monitoring of the

S9500 series routing switches.

H3C S9500 Series Routing

Switches Operation Manual

It includes Product Overview, Access Volume, IP

Service Volume, IP Routing Volume, IP Multicast

Volume, MPLS VPN Volume, QoS ACL Volume,

Security Volume, System Volume and Acronyms.

Obtaining Documentation

You can access the most up-to-date H3C product documentation on the World Wide

Web at this URL: http://www.h3c.com.

The following are the columns from which you can obtain different categories of product

documentation:

[Products & Solutions]: Provides information about products and technologies.

[Technical Support & Document > Technical Documents]: Provides several categories

of product documentation, such as installation and operation.

[Technical Support & Document > Product Support > Software]: Provides the

documentation released with the software version.

Documentation Feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Command Manual – Feature List and Command Index

H3C S9500 Series Routing Switches Chapter 1 Feature List

1-1

Chapter 1 Feature List

The S9500 series support abundant features and the related documents are divided

into the volumes as listed in Table 1-1.

Table 1-1 Feature list

Volume Features

Ethernet Port POS Port Link

Aggregation Port Isolation

VLAN MAC Address

Table

Management GVRP QinQ

Ethernet Port

Loopback

Detection DLDP Ethernet OAM

Smart Link

and Monitor

Link

MSTP BPDU Tunnel HVRP RRPP

Access

Volume

RPR

ARP IP Address VRRP DHCP

DNS UDP Helper NAT IP

Performance

IP Services

Volume

URPF

Static Route RIP OSPF ISIS

IP Routing

Volume BGP IP Route

Policy Route

Capacity Recursive

Routing

Common

Multicast IGMP

Snooping IGMP PIM

IP Multicast

Volume Multicast

VLAN MSDP MBGP

MPLS MPLS VLL MPLS VPLS MPLS L3VPN

MPLS VPN

Volume MPLS OAM

QoS ACL

Volume QoS ACL

Protocol Port

Security 802.1x AAA RADIUS

HWTACACS Password

Control

SSH IDS Linkage Portal VBAS

Security

Volume Traffic

Accounting

Command Manual – Feature List and Command Index

H3C S9500 Series Routing Switches Chapter 1 Feature List

1-2

Volume Features

Command

Line Interface Login and User

Interface FTP and TFTP HA

NQA NetStream NTP RMON

SNMP Packet

Statistics

Accounting

Device

Management

Configuration

File

Management

File System

Management Cluster

Management

System

Maintenance

and Debugging

Information

Center

System

Volume

PoE

Configuration Clock Module ACSEI Server OAP Module

Command Manual – Feature List and Command Index

H3C S9500 Series Routing Switches Chapter 2 Command Index

2-1

Chapter 2 Command Index

The command index includes all the commands in the Command Manual, which are

arranged alphabetically.

ABCDEFGHIJKLMNOPQRSTUVWX

abr-summary OSPF Commands 1-1

access-limit AAA RADIUS

HWTACACS Commands 1-1

accounting commands scheme Login and User Interface

Commands 1-1

accounting enable Traffic Accounting

Commands 1-1

accounting optional AAA RADIUS

HWTACACS Commands 1-2

accounting optional AAA RADIUS

HWTACACS Commands 1-23

accounting-mode traffic Traffic Accounting

Commands 1-2

acl QoS Commands 4-1

acl ACL Commands 1-1

acsei client close ACSEI Server Commands 1-1

acsei client reboot ACSEI Server Commands 1-1

acsei server ACSEI Server Commands 1-2

acsei server enable ACSEI Server Commands 1-2

acsei timer clock-sync ACSEI Server Commands 1-3

acsei timer monitor ACSEI Server Commands 1-3

active region-configuration MSTP Commands 1-1

add addritem Cluster Management

Commands 1-28

aggregate BGP Commands 1-1

aggregate MBGP Commands 1-1

Command Manual – Feature List and Command Index

H3C S9500 Series Routing Switches Chapter 2 Command Index

2-2

aggregate MPLS L3VPN Commands 1-1

anti-attack arp ARP Commands 3-5

anti-attack arp aging-time ARP Commands 3-5

anti-attack arp exclude-mac ARP Commands 3-6

anti-attack arp threshold ARP Commands 3-7

anti-attack gateway-duplicate ARP Commands 3-3

anti-attack ip ARP Commands 4-1

anti-attack ttl1 ARP Commands 4-1

apply as-path Routing Policy Commands 1-1

apply community Routing Policy Commands 1-2

apply cost Routing Policy Commands 1-3

apply cost-type Routing Policy Commands 1-4

apply extcommunity Routing Policy Commands 1-4

apply ip next-hop Routing Policy Commands 1-5

apply isis Routing Policy Commands 1-6

apply local-preference Routing Policy Commands 1-6

apply mpls-label MPLS L3VPN Commands 1-2

apply origin Routing Policy Commands 1-7

apply tag Routing Policy Commands 1-8

area OSPF Commands 1-2

area-authentication-mode ISIS Commands 1-1

arp check ARP Commands 1-1

arp enable size ARP Commands 2-2

arp entry-check ARP Commands 3-1

arp local-proxy enable ARP Commands 1-3

arp max-aggregation-entry ARP Commands 2-2

arp max-entry ARP Commands 2-1

arp non-flooding ARP Commands 1-1

arp proxy enable ARP Commands 1-2

arp static ARP Commands 1-4

arp static multi-port ARP Commands 1-5

arp timer aging ARP Commands 1-7

asbr-summary OSPF Commands 1-2

Altri manuali per S9500 Series

Indice

Altri manuali H3C Interruttore

H3C

H3C S12500X-AF Series Guida rapida

H3C

H3C S9500E Series Manuale di installazione

H3C

H3C S6805 Series Manuale utente

H3C

H3C S5830V2 series Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S5120-EI Series Manuale utente

H3C

H3C SecPath Series Manuale utente

H3C

H3C S5500-SI Series Manuale utente

H3C

H3C S3600-28PSI Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S6800 Series Manuale di installazione

H3C

H3C S6520-SI Series Manuale di installazione

H3C

H3C S6850-56HF Manuale operativo e di manutenzione

H3C

H3C S9850 Series Manuale di istruzioni

H3C

H3C S9500 Series Istruzioni per l'installazione

H3C

H3C S7500 Series Manuale utente

H3C

H3C S5590-HI Series Manuale utente

H3C

H3C S10506 Manuale operativo e di manutenzione

H3C

H3C S6812 Series Manuale utente

H3C

H3C S5500-EI series Istruzioni per l'installazione

H3C

H3C BX720E Manuale utente

H3C

H3C S3610 Series Manuale utente

H3C

H3C S5500-EI series Manuale utente

H3C

H3C LS-5500-28C-PWR-SI-OVS Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente