Harman Infinity KAPPA 6 Manuale utente

Innity Kappa 6, Kappa 8, and Kappa 10 marine speaker - Owner’s Manual

Haut-parleur marine Innity Kappa 6, Kappa 8 et Kappa 10 - Mode D’emploi

Altavoz para entornos marinoss Innity Kappa 6, Kappa 8 y Kappa 10 - Manual de Propietario

Innity Kappa 6、Kappa 8 和Kappa 10 船用扬声器 - 用户手册

Innity Kappa 6、Kappa 8 和Kappa 10 船載喇叭 - 擁有者手冊

Marine speaker laut Innity Kappa 6, Kappa 8, dan Kappa 10 - Panduan Pengguna

Innity(インフィニティ ) Kappa 6、Kappa 8、Kappa 10マリーン・スピーカー -

取扱説明書

Innity Kappa 6, Kappa 8 󻥾Kappa 10 Marine 󻜷󻜟󾖴󼀓󽊫󼱓 - 󻸛󼐘󼓿󾖴󻺓󻟴󻺋

INFINITY KAPPA 6, KAPPA 8, AND

KAPPA 10 MARINE SPEAKER

CHS

CHT

THANK YOU FOR YOUR PURCHASE . . .

Your Inﬁnity product has been designed to provide you with the performance and ease of operation you would expect from

Inﬁnity.

ABOUT THE MANUAL

This manual describes general installation guidelines. However, please note that proper installation of marine audio

components requires qualiﬁed experience. If you do not have the knowledge and tools to successfully perform this

installation, we strongly recommend consulting an authorized Inﬁnity dealer about your installation options. Keep all

instructions and sales receipts for reference.

WHAT’S IN THE BOX

Kappa 6

DIMENSIONS

Kappa 6 Kappa 8

Kappa 10

Kappa 8

INFINITY KAPPA 6, KAPPA 8, AND

KAPPA 10 MARINE SPEAKER

12X

1X 2X

12X

1X 1X 2X

7-15/32” (189.4mm)

5-23/32” (144.8mm)

2-9/16” (65mm)

3-21/32” (92.5mm)

3-3/16” (80.5mm)

4-9/32” (108.1mm)

9-1/2” (241mm)

7” (177.4mm)

SPEAKER SIGNAL WIRING

To send signal to the Inﬁnity marine speaker, connect the positive (+) and negative (-) speaker wires to the appropriate

speaker outputs of your source unit or ampliﬁer. Be sure to observe proper polarity.

SPEAKER LED WIRING

To provide power for the LEDs, plug the 24-gauge black (+), blue, green, and red LED wires from the speaker into the

included female connector, then run the wires from the female connector to your compatible 12-volt power source or light

controller (sold separately). If using a separate controller, be sure to connect each wire to the proper output.

If hardwiring the LEDs directly to your power source, you can choose the color of the LEDs by connecting the black wire to

the positive (+) terminal, and the appropriate R, G, and/or B single wire or combination of wires to the negative (-) terminal.

There are 7 possible colors, depending on the wiring conﬁguration you choose:

Kappa 10

9-9/16” (235.6mm)

11-5/8” (295mm)

6-13/32” 162.4mm

4-7/8” (123mm)

R BG

To power source To speaker

Blue

Green

Red

Black

Wire connected to positive

(+12V) terminal

Wire connected to

negative (-) terminal

Color produced

Black

Red Red

Green Green

Blue Blue

Red + Green Yellow

Red + Blue Purple

Blue + Green Aquamarine

Red + Blue + Green White

APPLYING FOAM SEAL

To help seal your installation against water, and to provide an airtight acoustic seal, apply the self-adhesive foam seal to the

speaker frame.

MOUNTING THE SPEAKER

Use the included screws to mount the speaker to the location. Use the included speed clips if necessary to provide a secure

mount.

NOTE: Use caution when cutting and using screws with ﬁberglass to prevent scratches and cracks.

Kappa 6 and Kappa 8 Kappa 10

Wire connected to positive

(+12V) terminal

Wire connected to

negative (-) terminal

Color produced

Black

Red Red

Green Green

Blue Blue

Red + Green Yellow

Red + Blue Purple

Blue + Green Aquamarine

Red + Blue + Green White

APPLYING FOAM SEAL

To help seal your installation against water, and to provide an airtight acoustic seal, apply the self-adhesive foam seal to the

speaker frame.

MOUNTING THE SPEAKER

Use the included screws to mount the speaker to the location. Use the included speed clips if necessary to provide a secure

mount.

NOTE: Use caution when cutting and using screws with ﬁberglass to prevent scratches and cracks.

Kappa 6 and Kappa 8 Kappa 10

REMOVING THE TWEETER FOR SEPARATE MOUNTING (KAPPA 8 ONLY)

Use the included 2-pin tool to remove the tweeter from the woofer housing. Place the pins of the tool in the holes of the

tweeter grille and rotate 45 degrees clockwise to loosen and remove.

FLUSH-MOUNTING THE TWEETER

Place the tweeter in the mounting bracket and use the tool to secure by turning 45 degrees counter-clockwise.

To transmit audio signal to the tweeter, make sure the woofer and tweeter are connected with the included cable.

45°

45 °

HARMAN International Industries,

Incorporated 8500 Balboa Boulevard,

Northridge, CA 91329 USA

www.inﬁnityspeakers.com

Inﬁnity is a trademark of HARMAN International Industries, Incorporated,

registered in the United States and/or other countries. Features, speciﬁcations

and appearance are subject to change without notice.

Place the tweeter in the mounting location, then turn each setscrew clockwise to tighten mounting brackets. Use caution so

as not to overtighten. Snap the included outer ring over the mounting bracket to hide the setscrews.

Specications Kappa 6 Kappa 8 Kappa 10

Continuous power

handling

100W 200W 300W

Peak power handling 300W 500W 900W

Frequency response 40Hz – 25kHz 30Hz – 22kHz 20Hz – 2kHz

Nominal impedance 3 Ohms* 3 Ohms* 2 or 4 Ohms (use

switch to select)

Sensitivity 92dB 92dB 89dB

External diameter 7-15/32” (189.4mm) 9-1/2” (241mm) 11-5/8” (295mm)

Mounting cutout diameter 5-23/32” (144.8mm) Woofer: 7” (177.4mm)

Tweeter bracket: 4-9/16”

(115.9mm)

9-9/16” (235.6mm)

Total depth 3-21/32” (92.5mm) 4-9/32” (108.1mm) 6-13/32”

(162.4mm)

Mounting depth 2-9/16” (65mm) 3-3/16” (80.5mm) 4-7/8” (123mm)

*NOTE: Because of the woofer’s low impedance, do not wire two or more in parallel to an ampliﬁer; doing so can result in

overheating and damage to the ampliﬁer.

MERCI POUR VOTRE ACHAT . . .

Votre produit Inﬁnity a été conçu pour vous offrir les performances et la facilité d’utilisation que vous attendez de notre part.

PRÉSENTATION DU MANUEL

Ce manuel contient les directives d’installation générales. Cependant, veuillez noter que l’installation correcte de

composants audio marine requiert une expérience qualiﬁée. Si vous ne disposez pas des connaissances et des outils

permettant d’exécuter correctement cette installation, nous vous recommandons fortement de consulter un distributeur

agréé Inﬁnity pour connaître vos options d’installation. Conservez toutes les instructions et les factures à titre de référence.

CONTENU DE LA BOÎTE

Kappa 6

DIMENSIONS

Kappa 6 Kappa 8

Kappa 10

Kappa 8

HAUT-PARLEUR MARINE INFINITY

KAPPA 6, KAPPA 8 ET KAPPA 10

12X

1X 2X

12X

1X 1X 2X

7-15/32” (189.4mm)

5-23/32” (144.8mm)

2-9/16” (65mm)

3-21/32” (92.5mm)

3-3/16” (80.5mm)

4-9/32” (108.1mm)

9-1/2” (241mm)

7” (177.4mm)

CÂBLAGE DU SIGNAL DU HAUT-PARLEUR

Pour envoyer le signal au haut-parleur marine Inﬁnity, connectez les ﬁls de haut-parleur positif (+) et négatif (-) aux sorties de

haut-parleur appropriées de votre appareil ou ampliﬁcateur source. Veillez à respecter la polarité adéquate.

CÂBLAGE DES DEL DU HAUT-PARLEUR

Pour alimenter les DEL, branchez les ﬁls de DEL de 0,205 mm² (24-gauge) noir (+), bleu, vert et rouge du haut-parleur dans le

connecteur femelle inclus, puis faites passer les ﬁls du connecteur femelle à votre alimentation 12 volts ou contrôleur d’éclairage

compatible (vendu séparément). Si vous utilisez un contrôleur séparé, veillez à connecter chaque ﬁl à la bonne sortie.

Si vous câblez directement les DEL à votre alimentation, vous pouvez choisir la couleur des DEL en connectant le ﬁl noir à la

borne positive (+) et les ﬁls R, V et/ou B individuels appropriés ou une combinaison de ces ﬁls à la borne négative (-).

Il y a 7 couleurs possibles, selon la conﬁguration de câblage que vous choisissez :

Kappa 10

9-9/16” (235.6mm)

11-5/8” (295mm)

6-13/32” 162.4mm

4-7/8” (123mm)

R BG

Vers l’alimentation Vers le haut-parleur

Bleu

Vert

Rouge

Noir

Fil connecté à la borne

positive (+12V)

Fil connecté à la borne

négative (-)

Couleur produite

Noir

Rouge Rouge

Vert Vert

Bleu Bleu

Rouge + Vert Jaune

Rouge + Bleu Mauve

Bleu + Vert Bleu vert

Rouge + Bleu + Vert Blanc

APPLICATION DE LA MOUSSE D’ÉTANCHÉITÉ

Pour contribuer à l’étanchéité de votre installation contre l’eau et pour créer une étanchéité acoustique à l’air, appliquez le

joint de mousse auto-adhésif sur la structure du haut-parleur.

MONTAGE DU HAUT-PARLEUR

Utilisez les vis incluses pour monter le haut-parleur dans son emplacement. Utilisez les attaches rapides incluses si

nécessaire pour sécuriser le montage.

REMARQUE : Soyez prudent pour découper et visser des vis dans la ﬁbre de verre aﬁn d’éviter des rayures et des fêlures.

Kappa 6 and Kappa 8 Kappa 10

DÉPOSE DU TWEETER POUR UN MONTAGE SÉPARÉ (KAPPA 8 UNIQUEMENT)

Utilisez l’outil à 2 broches inclus pour retirer le tweeter du corps du haut-parleur grave. Placez les broches de l’outil dans les

trous de la grille du tweeter et tournez sur 45 degrés dans le sens horaire pour le desserrer et le retirer.

MONTAGE AFFLEURANT DU TWEETER

Placez le tweeter dans le support de ﬁxation et utilisez l’outil pour le bloquer en tournant sur 45 degrés dans le sens

trigonométrique.

Pour transmettre le signal audio au tweeter, vériﬁez que le haut-parleur grave et le tweeter sont branchés avec le câble inclus.

45°

45 °

Altri manuali per Infinity KAPPA 6

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Harman Altoparlanti

Harman

Harman JBL Professional GSF3 Manuale utente

Harman

Harman JBL BOOMBOX 2 Manuale utente

Harman

Harman JBL CRUISE Manuale utente

Harman

Harman JBL VLA-C125S-ACC Cardioid Kit Manuale utente

Harman

Harman JBL GO Manuale utente

Harman

Harman harman/kardon SOUNDSTICKS 4 Manuale utente

Harman

Harman JBL STUDIO 610 Manuale utente

Harman

Harman JBL BassPro Micro Manuale utente

Harman

Harman JBL PARTYBOX 710 Manuale utente

Harman

Harman JBL PULSE Manuale utente

Harman

Harman JBL FLIP 5 Manuale utente

Harman

Harman harman/kardon ESQUIRE MINI 2 Manuale utente

Harman

Harman Infinity Primus P143 Manuale utente

Harman

Harman JBL PARTYBOX ON-THE-GO Manuale utente

Harman

Harman Infinity Fuze Pint Manuale utente

Harman

Harman JBL STUDIO 2 6IW Manuale utente

Harman

Harman JBL Club 34F Manuale utente

Harman

Harman JBL EON600 Series Manuale utente

Harman

Harman JBL Club 322F Manuale utente

Harman

Harman JBL PROFESSIONAL PRX915XLF Manuale utente

Harman

Harman JBL C Series Manuale utente

Harman

Harman PRX908 Manuale utente

Harman

Harman Authentics L16 Manuale utente

Harman

Harman JBL PartyBox Ultimate Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente