Harmar Mobility AL6000 Manuale utente

27AUG2021 | 630-00152 REV A

AL6000 / AL6000HD

UNIVERSAL

HYBRID LIFT

AL6000HD

AL6000

OWNER’S

MANUAL

From all of us at Harmar, thank you for placing your trust in our

products and allowing us to be a part of your journey.

For more than 20 years we have been commied to building

products that help you maintain independence. With a drive to

empower people to live as they choose, Harmar Lis Lives.

Beyond vehicle lis, like the one you’ve purchased, Harmar designs

and manufactures Vercal Plaorm Lis, award-winning Stair Lis,

and more.

We strive to be the leading provider of li-assisng technology in

your home and on the road.

Visit harmar.com or speak to your dealer about the other soluons

available from Harmar.

THANK YOU

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

TABLE OF CONTENTS

AL6000 / AL6000HD

TABLE OF CONTENTS

SAFETY ........................................................................................4

Safety Denions ....................................................... 4

INTRODUCTION ...................................................................... 6

Device Name:

AL6000 / AL6000HD Hybrid Vehicle Lis .................. 6

Read and Understand ............................................... 6

Technical Specicaons ............................................ 6

OPERATION ............................................................................. 7

Loading and Securing a Mobility Device .................. 7

Securement with Cambuckle Retenon Straps ... 8

Securement with oponal Q’Straint Retractors.. 10

Securement with oponal Hold-down Arm ...... 10

Puddle Lights (oponal) .................................... 11

Unloading a Mobility Device .................................. 11

SAFETY & MAINTENANCE ............................................... 13

Owner/Maintenance .............................................. 13

Maintenance/Service Record ................................. 14

WARRANTY............................................................................. 16

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

SAFETY

AL6000 / AL6000HD: SECTION 1

Indicates a hazardous situaon that, if not

avoided, could result in death or serious injury.

WARNING

Indicates a hazardous situaon that, if not avoided,

could result in minor or moderate injury.

CAUTION

Indicates a situation which can cause damage to

the lift and/or the environment, or cause the lift to

operate improperly.

NOTICE

SECTION 1

SAFETY

SAFETY DEFINITIONS

This safety alert symbol appears with

safety statements. It means attention,

become alert, your safety and the

safety of others are involved! Please

read and abide by the message that

follows the safety alert symbol.

NOTE: Indicates a condition that should be followed in

order for the lift to function in the manner intended.

If you do not understand any portion of the

installation or operation procedures, please consult

Harmar's Technical Service Department at

800-833-0478. Do not attempt to install or use this

lift if you have any hesitation or question. Serious

injury or damage can result if proper procedures are

not followed.

Consider the following general informaon when using

your li. Specics may vary based on your chair model

and li combinaon.

Always make certain your li is fully deployed and

ush with the ground prior to loading your mobility

device.

Ensure you have posioned the chair properly on

the plaorm and that it is secured on the li before

transport. In some applicaons, accessories may have

to be removed from the mobility device. The seat back

angle may have to be opened forward or folded down

at.

Always verify wheels are captured by cradles or

aligned evenly on the plaorm. Also ensure the

securement device is fully engaged (hold-down device

or retenon straps). Please consult your dealer on the

specics of your applicaon if you have quesons.

Always drive slowly over rough terrain such as

potholes, unpaved roads, railroad tracks, speed bumps

or other uneven surfaces. Excessive loads and rough

driving will damage your li and will not be covered by

the warranty.

Stop using the li immediately if you noce any

damage. Do not aempt to transport a mobility device

with a compromised li. Damage to your chair, li and/

or vehicle may occur. Contact your dealer and ask for

an evaluaon of the li prior to further use.

Always check to make sure nobody is in the process of

geng on or o the mobility device before operang

the li.

Always verify the mobility device is held rmly in place

prior to transport.

Never aempt to move the vehicle without the li

being in the full stowed posion and the cargo door/

hatch closed.

Indicates a hazardous situaon that, if not

avoided, could result in death or serious injury.

WARNING

Indicates a hazardous situaon that, if not avoided,

could result in minor or moderate injury.

CAUTION

Indicates a situation which can cause damage to

the lift and/or the environment, or cause the lift to

operate improperly.

NOTICE

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

SAFETY

AL6000 / AL6000HD: SECTION 1

This li is NOT meant for human transport. The

chair or scooter MUST be unoccupied before

operang the li. Each li is designed to transport

a specic mobility device only. DO NOT aempt

to move any mobility devices, objects, people, or

materials other than those for which the li was

intended.

WARNING

When using the li, keep your hands and feet from

under the plaorm.

WARNING

Beware of Pinch Points. These are

areas of moving parts that can catch

extremies or clothing. Do not place

ngers, extremies, clothing or

jewelry near pinch points.

WARNING

Do not allow anyone to use this li unless they

are properly instructed on operaonal and safety

procedures.

CAUTION

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

INTRODUCTION

AL6000 / AL6000HD: SECTION 2

SECTION 2

INTRODUCTION

DEVICE NAME:

AL6000 / AL6000HD

HYBRID VEHICLE LIFT

Indications of Use: The intended use of the

AL6000 / AL6000HD is to lift, secure and transport

an unoccupied mobility device for patients or

mobility-impaired persons.

READ AND UNDERSTAND

This manual provides instructions for proper use

and maintenance of your AL6000 / AL6000HD

Hybrid Vehicle Lift. Any alterations to the equipment

without written authorization by the manufacturer

is prohibited and will void the warranty.

If you have questions concerning the operation and

maintenance of your Hybrid Vehicle Lift, please

contact your dealer.

Please ensure that you fill out the separate warranty

form and return it within ten (10) days of installation

to register your lift.

TECHNICAL SPECIFICATIONS

Visit harmar.com for specifications on the specific

lift model and configuration.

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

OPERATION

AL6000 / AL6000HD: SECTION 3

SECTION 3

OPERATION

LOADING AND SECURING A

MOBILITY DEVICE

Using the wired hand control or optional wireless

key-fob controller, lower the lift platform until it

reaches the ground and becomes level. Start by

activating the hand control with the power button.

The hand control has two operating buttons, UP to

raise and stow the platform and DOWN to draw out

and lower the platform, that must be depressed and

held to complete the desired function. The hand

control has integrated LED lights that can be used as

a flashlight at night. The hand control can be aimed

at the ground or at the vehicle to assist in ensuring

the path is unobstructed. See Figure 3-1.

LEDs

Down

Power

Button

Figure 3-1

NOTE: The lift is designed to draw power from the car

battery as needed and will operate while the vehicle is

off. However, it is recommended that the lift be operated

while the car is running for optimal performance.

1. Loading the mobility device onto the platform.

Determine the heaviest portion of the mobility

device. This is usually under the drive wheels,

motor(s), and batteries. Always walk the

mobilty device onto the platform with the

heaviest portion closest to the lifting tower.

If loading a scooter and the platform has the

AL617 extension plate, position the scooter so

the front wheels are resting on the extension

plate, and the rear wheels are on the main

platform. This allows the heaviest portion of

the scooter to be closest to the lifting tower.

Set your mobility device speed control to slow

speed to maneuver easily onto the platform.

See Figures 3-2.

SLOW

Scooter

extension

plate

Figure 3-2

The power button must be pressed to enable the hand

control to operate. At which time, the buttons will

light up and the front LED’s will act as a flashlight.

If no button is pressed after approximately two

minutes, the hand control will turn off automatically.

Press the power button to turn back on.

NOTICE

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

OPERATION

AL6000 / AL6000HD: SECTION 3

Do not ride on the mobility device when loading and

unloading the plaorm.

CAUTION

Note: Please ensure hand control wire does not interfere

with the movement of the lift. Improper operation can

result in damage not covered by manufacturers warranty.

SECUREMENT WITH CAMBUCKLE

RETENTION STRAPS

1. Each corner of the AL6000 platform has a

restraint attached with a hook on the end.

Place each hook in either the anchor plate slot,

each U-bolt, or tie-down loops attached to the

mobility device. See Figure 3-3.

PULL to

TIGHTEN

PUSH to

RELEASE

Figure 3-3

2. Pull the loose end of each strap tight. To

release, simply press the release tab on the

cambuckle, pull and remove the hooks.

See Figure 3-4.

PULL to

TIGHTEN

PUSH to

RELEASE

Figure 3-4

Ensure no part of the mobility device extends

beyond the space of the plaorm. Pay parcular

aenon to areas above the plaorm as cargo

openings are oen more compact towards the top.

CAUTION

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

OPERATION

AL6000 / AL6000HD: SECTION 3

NOTE: Elevate the platform with the mobility device 18”

or so off the ground to secure the straps. It’s much easier

to complete the work at waist height.

3. If the chair has a folding seatback, it may

be placed in the down position for easier

clearance when loading the chair into the

vehicle. Depending on the size of the chair, the

headrest may have to be removed as well.

4. Use the wired hand control or optional wireless

key-fob controller, to raise and retract the

platform into the stowed/travel position.

See Figure 3-6.

Figure 3-6

5. Double-check that the mobility device is

secured properly on the platform. While

holding the hand control, stand to the side and

away from the lift. Press the “Up” button.

When the platform stops retracting, release

the button. The platform will automatically

lock itself into a travel position. Close the door

slowly, making sure that no part of the mobility

device or other objects in the cargo area

contacts the door. See Figure 3-5.

Figure 3-5

Be sure to look closely at both sides and the

top while retracting into the vehicle to ensure

no part of the mobility device will get caught

on the edges of the vehicle opening.

CAUTION

6. The wired hand control comes equipped with a

magnetic back. Once the platform is completely

stowed in the vehicle, simply attach the wired

hand control to a metal surface for easy

retrieval.

AL6000 / AL6000HD: Owner’s Manual

27AUG2021 | 630-00152 REV A

OPERATION

AL6000 / AL6000HD: SECTION 3

SECUREMENT WITH

OPTIONAL Q’STRAINT RETRACTORS

1. With the optional Q’Straint retractors, place

each hook in the appropriate anchor plate

slot, U-bolt, or tie-down loop. The straps will

automatically retract and secure the mobility

device. Make sure each strap retracts without

any interference or slack in the strap. Adjust

if necessary. To release, press and hold the

lever to release the straps and then remove the

hooks. See Figure 3-7.

PUSH TO

RELEASE

TURN TO

TIGHTEN

Figure 3-7

2. Either two or four retractor configurations can

be used. For two retractor systems, one

Q’Straint should be located on each corner

opposite each other on the platform.

See Figure 3-8.

Figure 3-8

SECUREMENT WITH

OPTIONAL HOLD-DOWN ARM

1. The hold-down arm may be rotated out of the

way. Pull the T-handle and rotate the hold-

down arm to the desired posion. Release the

T-handle to lock in place. See Figure 3-9.

Figure 3-9

2. The hold-down arm can be rotated over the

center of the seat. Pull the T-handle and rotate

the arm to the desired position. Release the

T-handle to lock in place. See Figure 3-10.

Figure 3-10

The armrest of the mobility device may have to be

raised or removed to properly position the hold-down

arm to avoid damage.

NOTICE

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Harmar Mobility Sistema di sollevamento

Harmar Mobility

Harmar Mobility AL030 Istruzioni operative

Harmar Mobility

Harmar Mobility PARAGON OUTLANDER Series Supplemento

Harmar Mobility

Harmar Mobility MODRAMP Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Harmar Mobility

Harmar Mobility SL600 HD Supplemento

Harmar Mobility

Harmar Mobility Pinnacle Manuale

Harmar Mobility

Harmar Mobility AL500 Manuale utente

Harmar Mobility

Harmar Mobility Pinnacle SL600 Manuale utente

Harmar Mobility

Harmar Mobility VPL400-X Supplemento

Harmar Mobility

Harmar Mobility AL600 Pioneer Istruzioni per l'installazione

Harmar Mobility

Harmar Mobility AL625HD Istruzioni operative

Harmar Mobility

Harmar Mobility AL350 Istruzioni operative

Harmar Mobility

Harmar Mobility Pinnacle SL600 Supplemento

Harmar Mobility

Harmar Mobility Single-Fold Ramp Istruzioni per l'installazione

Harmar Mobility

Harmar Mobility HIGHLANDER EPL400 Istruzioni per l'installazione

Harmar Mobility

Harmar Mobility IL500 Sierra Inclined Platform Lift Manuale di istruzioni

Harmar Mobility

Harmar Mobility VPL400-X Manuale utente

Harmar Mobility

Harmar Mobility CPLP400 Istruzioni per l'installazione

Harmar Mobility

Harmar Mobility AL055 Istruzioni operative

Harmar Mobility

Harmar Mobility HIGHLANDER II Supplemento

Harmar Mobility

Harmar Mobility AL600 Pioneer Manuale utente

Harmar Mobility

Harmar Mobility HELIX Manuale utente

Harmar Mobility

Harmar Mobility Highlander RPL400 Manuale utente

Harmar Mobility

Harmar Mobility Highlander CPL400 Istruzioni per l'installazione

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Rotary

Rotary SPO16 Manuale utente

Ricon

Ricon Mirage F9T Manuale utente