Harrison 42000005 Manuale utente
User Guide.
ELECTROSURGERY ANALIZER
2
3
Table of Contents
INTRODUCTION ---------------------------------------------------- 4
SAFETY INFORMATION ------------------------------------------ 4
ACRONYMS AND DEFINITIONS -------------------------------- 5
PACKAGING --------------------------------------------------------- 6
UNDERSTANDING THE DEVICE ------------------------------- 7
TURNING ON THE DEVICE ------------------------------------- 10
TEST MODULES ---------------------------------------------------13
GENERATOR OUTPUT TEST ----------------- 13
EXTERNAL RESISTANCE MODULE --------- 14
CQM ------------------------------------------------- 20
HF LEAKAGE CURRENT ----------------------- 21
SOFTWARE AND APPLICATION ------------------------------- 29
PROBLEMS AND SOLUTIONS --------------------------------- 30
MAINTENANCE -------------------------------------------------- 30
BATTERY INDICATOR ----------------------------------------- 31
TECHNICAL SPECIFICATIONS ----------------------------- 31
FAQ ----------------------------------------------------------------- 33
4
INTRODUCTION
SAFETY INFORMATION
HARRISON Electrosurgery Analyzer is practical, compact, portable,
and easy to handle. It is used in electronic scalpel performance tests.
For better conservation of your device and to prolong its useful life,
please consider the following:
The data HARRISON collects provides a better analysis of
different electrosurgical units in different test modalities.
Harrison allows the simulation of:
Power
Crest
Factor
RMS
Current
Main
Frequency
https://www.arkmeds.us/support
5
If you notice any irregularity with the device, do not put
it into operation. Depending on the problem, the device
may suer irreversible damage, which will lead to costly
maintenance or discontinuity. Whenever the device
fails, set it aside and contact the Arkmeds Support
Team through the channel:
https://www.arkmeds.us/support
1. Do not expose the device to high humidity.
2. Do not expose the device to temperatures above 50 °C.
3. Respect the device’s battery life.
4. Insert the connectors only into the spots intended for operation.
5. Do not connect this device to the patient.
6. Replace the power cord if any damage is identified
7. Replace accessories if any damage is identified.
8. Do not open the device without the expertise and the manufacturer’s
authorization.
9. Always examine the device before and after each use.
ACRONYMS AND DEFINITIONS
- RMS - Effective value
- Crest Factor - Dimensionless value equal to the peak output
voltage divided by the RMS voltage
- Main Frequency - Oscillation frequency of the scalpel output signal
- ESU - Electrosurgical Unit
- IEC - International Electrotechnical Commission
- CQM - Contact Quality Monitor
6
PACKAGE CONTENT
Harrison analyzer comes with the following items:
1 x Harrison (PN 42000005)
1 x User Manual (PN 12000034)
1 x Calibration Certificate
Accessories
2 x 30 cm Banana/banana connector (PN 31000001)
4 x 110° banana/banana connector (PN 31000024)
1 x Resistance Module (PN 31000042)
1 x Transport Bag (PN 12000040)
1 x Power Cord*
Brazil (PN 11000015)
USA (PN 11000236)
Europe (PN 11000237)
* The customer chooses the power cord standard.
Notes: After unpacking the device, connect it to the power grid to
charge the internal battery.
7
UNDERSTANDING THE DEVICE
Next, the device will be demonstrated with the description of its
connectors and controls
VISTA FRONTAL:
Touch Screen.
On/Off Button.
1
1
2
2
8
VISTA SUPERIOR:
VISTA LATERAL ESQUERDA
1
1
1
4
External Module Connection
2 5
3 6
7
7
VISTA LATERAL ESQUERDA
1
External Module Connection
1
Scalpel Input - Active.
Scalpel Inlet - Passive.
Ground Pin.
Air Circulation.
Cable Connector with Fuse
Holder.
Internal Load Connector
(default 200ohm).
External Load Connector.
9
VISTA LATERAL DIREITA
VISTA TRASEIRA
1
1
1
Air circulation.
Serial number identi cation tag.
1
10
TURNING ON THE DEVICE
Press the “on/off” button to turn on the device.
The device will perform internal communication tests and display the
settings screen of each module to be tested.
Dragging the
screen downwards,
we have access
to the menu with
options:
Bluetooth
Wi
Language
Card 1
Card 2
SCREEN
Indice
