7
CONGRATULATIONS! You have successfully installed your PCI
modem. Installing the Communications Software, described below,
is optional. For removal instructions, go to page 7.
Important — If Your PC Had an Existing Modem
You must redirect your application software so that it recognizes your
new modem.
!America Online Users: From the AOL Welcome screen, click the
Setup button; then click Expert Setup. Select the Devices tab and
double-click the name of your new modem.
!Dial-up Networking Users: From your computer's desktop, double-
click My Computer and then Dial-up Networking. Double-click
the Make New Connection icon, select your new modem from the
dropdown list, and follow the prompts.
Tip: If your faxmodem is not working, first try turning off your
computer and restarting it. Sometimes this will help Windows identify
and activate the correct drivers. If restarting your computer doesn’t
work, please consult the Troubleshooting section in the full-length
user’s manual.
If You Ever Need to Reinstall the Operating System
You must physically remove the PCI modem first. After reinstalling the
operating system, reinstall the modem following the instructions in this
Quick Start.
Installing the Communications Software
The accompanying CD describes the communication software package
included with your modem and provides easy point-and-click
installation. If necessary, consult the online help on the CD. Please run
the modem’s CD now. You should not install the drivers again, but you
should install any application software you like.
Removing a PCI Modem and Its Drivers
Follow these instructions if your computer already has a PCI modem
installed, and you want to replace it with your new modem.
1From the desktop, open the Control Panel, and then click Add
or Remove Programs. In the dialog box that opens, select the
