HBM PAD4001A Manuale utente

Operating Manual | Bedienungsanleitung |

Manuel d'emploi

English Deutsch Français

PAD4001A/4003A

Hottinger Baldwin Messtechnik GmbH

Im Tiefen See 45

D-64239 Darmstadt

Tel. +49 6151 803-0

Fax +49 6151 803-9100

[email protected]

www.hbm.com

Mat.: 7-1001.4238

DVS: A4238-1.0 HBM: public

10.2015

EHottinger Baldwin Messtechnik GmbH.

Subject to modifications.

All product descriptions are for general information only.

They are not to be understood as a guarantee of quality or

durability.

Änderungen vorbehalten.

Alle Angaben beschreiben unsere Produkte in allgemeiner

Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits

garantie dar.

Sous réserve de modifications.

Les caractéristiques indiquées ne décrivent nos produits

que sous une forme générale. Elles n'impliquent aucune

garantie de qualité ou de durablilité.

Operating Manual | Bedienungsanleitung |

Manuel d'emploi

English Deutsch Français

PAD4001A/4003A

Digital transducer electronics

2A4238-1.0 HBM: public PAD4001A/4003A

English

1 Safety instructions 3........................................

2 Markings used 7............................................

2.1 Symbols on the device 7......................................

2.2 The markings used in this document 7..........................

3 Structure and mode of operation 9...........................

3.1 Structure of the electronics 10..................................

3.2 Signal conditioning 11.........................................

3.3 Adaptive interference suppression 12............................

3.4 Inputs and outputs 13.........................................

3.4.1 Trigger function 13............................................

3.4.2 Filling and dosing 14..........................................

3.4.3 Limit value function 14.........................................

3.4.4 Extreme value functions 14....................................

4 Conditions on site 15........................................

5 Mechanical installation 16....................................

5.1 Important precautions during installation 16......................

5.2 Dimensions 17...............................................

6 Electrical connection 18......................................

6.1 Cable laying 18...............................................

6.2 Pin assignment 18............................................

6.3 Supply voltage 21.............................................

7 Interfaces 23................................................

7.1 RS‐485 4‐wire interfaces (UART) 23............................

7.2 CANopen interface 25.........................................

8 Operation via software 27....................................

9 Waste disposal and environmental protection 27..............

Safety instructions

PAD4001A/4003A A4238-1.0 HBM: public 3

1 Safety instructions

Appropriate use

PAD digital transducer electronics are to be used exclus

ively for measurement tasks and directly related control

tasks within the application limits detailed in the specifica

tions. Any other use is not appropriate.

Any person instructed to carry out installation, commis

sioning or operation of the device must have read and

understood the Operating Manual and in particular the

technical safety instructions.

In the interests of safety, the device should only be oper

ated by qualified personnel and as described in the Oper

ating Manual. It is also essential to comply with the legal

and safety requirements for the application concerned

during use. The same applies to the use of accessories.

PAD is not intended for use as a safety component.

Please also refer to the "Additional safety precautions"

section. Proper and safe operation requires proper trans

portation, correct storage, siting and mounting, and care

ful operation.

Operating conditions

SPlease observe the allowed maximum values stated

in the specifications for:

- Max. supply voltage

- Max. voltage for inputs and outputs

- Max current of outputs

- Temperature limits

SMake sure that the max. current for plugs and sockets

is adhered to in bus mode.

Safety instructions

4A4238-1.0 HBM: public PAD4001A/4003A

SThe device must not be modified from the design or

safety engineering point of view except with our ex

press agreement. In particular, any repair or soldering

work on motherboards (exchanging components) is

prohibited.

SThe device is delivered from the factory with a fixed

hardware and software configuration. Changes can

only be made within the possibilities listed in the cor

responding documentation.

SThe device is maintenance free.

SPlease note the following points when cleaning the

housing:

- Disconnect the device from all current and voltage

supplies before cleaning it.

- Clean the housing with a soft, slightly damp cloth.

Never use solvent, as this could damage the label

or the housing.

- When cleaning, ensure that no liquid gets into the

device or connections.

SIn accordance with national and local environmental

protection and material recovery and recycling regula

tions, old equipment that can no longer be used must

be disposed of separately and not with normal house

hold garbage, see Chapter9 on page27.

Qualified personnel

Qualified persons means persons entrusted with the in

stallation, fitting, commissioning and operation of the

product who possess the appropriate qualifications for

their function.

This includes people who meet at least one of the three

following requirements:

Safety instructions

PAD4001A/4003A A4238-1.0 HBM: public 5

SKnowledge of the safety concepts of measurement

and automation technology is a requirement and as

project personnel, they must be familiar with these

concepts.

SAs measurement or automation plant operating per

sonnel, they been instructed how to handle the ma

chinery. They are familiar with the operation of the

equipment and technologies described in this docu

mentation.

SAs commissioning engineers or service engineers,

they have successfully completed the training to qual

ify them to repair the automation systems. They are

also authorized to activate, ground and label circuits

and equipment in accordance with safety engineering

standards.

Working safely

SThe device must not be directly connected to the

power supply system. The supply voltage must be

between 12 and 30VDC.

SError messages should only be acknowledged once

the cause of the error is removed and no further

danger exists.

SAutomation equipment and devices must be designed

in such a way that adequate protection or locking

against unintentional actuation is provided (e.g. ac

cess checks, password protection, etc.).

SFor those devices operating in networks, safety pre

cautions must be taken both in terms of hardware and

software, so that a line break or other interruptions to

signal transmission do not cause undefined states or

loss of data in the automation device.

Safety instructions

6A4238-1.0 HBM: public PAD4001A/4003A

SAfter making settings and carrying out activities that

are password-protected, ensure that any controls that

may be connected remain in a safe condition until the

switching performance of the device has been tested.

Additional safety precautions

Additional safety precautions to meet the requirements of

the relevant national and local accident prevention regu

lations must be taken in plants where malfunctions could

cause major damage, loss of data or even personal in

jury.

The scope of supply and performance of the device cov

ers only a small area of measurement technology. Before

starting up the device in a system, a project planning and

risk analysis must first be implemented, taking into ac

count all the safety aspects of measurement and auto

mation technology so that residual risks are minimized.

This particularly concerns personal and machine protec

tion. In the event of a fault, the relevant precautions must

establish safe operating conditions.

General dangers of failing to follow the safety

instructions

The device is state of the art and failsafe. The device

may give rise to residual dangers if it is inappropriately

installed or operated.

Markings used

PAD4001A/4003A A4238-1.0 HBM: public 7

2 Markings used

2.1 Symbols on the device

CE mark

The CE mark enables the manufacturer to guarantee that

the product complies with the requirements of the relev

ant EC directives (the Declaration of Conformity can be

found on the HBM website (www.hbm.com) under HBM

doc).

Statutory waste disposal mark

In accordance with national and local environmental pro

tection and material recovery and recycling regulations,

old devices that can no longer be used must be disposed

of separately and not with normal household garbage.

Also see Chapter9 on page27.

2.2 The markings used in this document

Important instructions for your safety are specifically

identified. It is essential to follow these instructions in or

der to prevent accidents and damage to property.

Symbol Significance

Notice This marking draws your attention to a situation in

which failure to comply with safety requirements can

lead to damage to property.

Important

This marking draws your attention to important in

formation about the product or about handling the

product.

Markings used

8A4238-1.0 HBM: public PAD4001A/4003A

SignificanceSymbol

Information

This marking draws your attention to information

about the product or about handling the product.

Emphasis

See …

Italics are used to emphasize and highlight text and

identify references to sections, diagrams, or external

documents and files.

Altri manuali per PAD4001A

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente