HealTech Electronics SH-HY1 Manuale utente

Indice

Altri manuali HealTech Electronics Accessori per motociclette

HealTech Electronics

HealTech Electronics QuickShifter Manuale utente

HealTech Electronics

HealTech Electronics GIPRO GPXT Istruzioni e ricette

HealTech Electronics

HealTech Electronics iLogger easy Istruzioni e ricette

HealTech Electronics

HealTech Electronics BLP-U04 Istruzioni e ricette

HealTech Electronics

HealTech Electronics QUICKSHIFTER EASY Istruzioni e ricette

HealTech Electronics

HealTech Electronics Maintenance Mate Istruzioni e ricette

HealTech Electronics

HealTech Electronics GIPRO X-TYPE Istruzioni e ricette

HealTech Electronics

HealTech Electronics MM-BM1 Manuale utente

HealTech Electronics

HealTech Electronics Advanced Rider Assistant Istruzioni e ricette

HealTech Electronics

HealTech Electronics Advanced Rider Assistant Manuale utente

HealTech Electronics

HealTech Electronics GIpro DS Series Manuale utente

HealTech Electronics

HealTech Electronics iLogger easy iLE-1-KIT Istruzioni e ricette

HealTech Electronics

HealTech Electronics iLogger easy Istruzioni e ricette

HealTech Electronics

HealTech Electronics MM-T02 Manuale utente

HealTech Electronics

HealTech Electronics Kawasaki W800 2011 Istruzioni e ricette

HealTech Electronics

HealTech Electronics FI Cleaner Tool Manuale utente

HealTech Electronics

HealTech Electronics iQSE-1 + QSH-P2T Istruzioni e ricette

HealTech Electronics

HealTech Electronics QuickShifter easy Istruzioni e ricette

HealTech Electronics

HealTech Electronics iQSE-1 Istruzioni e ricette

HealTech Electronics

HealTech Electronics GIpro DS Series Manuale utente

HealTech Electronics

HealTech Electronics QuickShifter easy Istruzioni e ricette

HealTech Electronics

HealTech Electronics QuickShifter easy Istruzioni e ricette

HealTech Electronics

HealTech Electronics SpeedoHealer SH-V4-C Istruzioni e ricette

HealTech Electronics

HealTech Electronics iLE-1-KIT Manuale utente

Manuali Accessori per motociclette popolari di altre marche

SRC

SRC B-TRK502-01-01-SL Manuale utente

3M

3M Speedglas 9100 MP Manuale utente

hepco & becker

hepco & becker 6307520 00 01 Manuale utente

HOMCOM

HOMCOM AA0-077 Manuale utente

hepco & becker

hepco & becker 6307558 00 01 Manuale utente

Wunderkind Custom

Wunderkind Custom 106503-F15 Guida utente

Dräger

Dräger HPS 3500 Manuale utente

M-WAVE

M-WAVE SKI Manuale utente

Kuryakyn

Kuryakyn 6212 Manuale utente

hepco & becker

hepco & becker 6507504 00 01 Manuale utente

Tool it

Tool it PROMAX LCD 9.13G Manuale utente

Custom Dynamics

Custom Dynamics TruWrapz Manuale utente

Roof

Roof RO200 CARBON Manuale utente

Kabuto

Kabuto Japan IBUKI Manuale utente

PUIG

PUIG 5051 Manuale utente

rizoma

rizoma ZTH050 Manuale utente

Joubert

Joubert 10001711 Manuale utente

Sperian

Sperian Optrel p420 Manuale utente

SHv4_HY1_InstallGuide_en.pdf [rev. 001] - 1 -

http://www.speedohealer.com

Install Guide for SH-HY1 Harness Kit

For use with the following HYOSUNG motorcycles:

ALL models with electronic dash (digital trip/odo)

- 2 –

Disclaimer: Donotattempttoinstalltheproductifyoudon’thavebasicmechanicalskills.

The SpeedoHealer is intended to improve speedometer accuracy. However, HealTech

Electronics Ltd. and its distributors shall not be liable for any loss, damage or penalties

caused by improper installation or inaccurate speed readings.

1. Locate the Speed Sensor coupler. It is behind the instrument cluster: 3-pole

connector with Black/White, Green and Orange wires.

If in doubt, trace the cable from the front wheel sensor until you find the coupler.

Confirmation:

Separate the Speed Sensorcoupler(youmightneedtouseasmallflathead

screwdrivertogetthecouplerapart).Rotate the front wheel while the ignition is

on. Does the speedometer show 0, turn the ignition off and proceed to the next

step. Otherwise, try again since you have disconnected something else.

2. After separating the Speed Sensor coupler, plug in both the male and female

3-pole SH harness connectors. Make sure the connectors are fully seated.

3. Connect the 4-pole SH harness connector to the SH box.

4. Check whether the SH is installed and working properly:

- Have the ignition OFF.

- Press SEL and keep it depressed while you turn ignition ON.

[t] (test) is now indicated. Release the button.

The speedo should indicate a number other than zero.

- Rotate the frontwheel.

[t] should be blinking as the wheel turns.

- Press SEL to exit from Test mode.

The speedometer should work the same way as with no SH installed.

If the tests fail, disconnect the 3-poleand4-pole connectors and check

whether the connector pins are bent or pushed out of position.

5. Mount the SH box behind the instrument cluster.

Secure the unit with the supplied cable ties and Velcro strips.

Do not bend the SH harness near the SHconnector.Otherwisethepinsmaybreak

over time.

To minimize cable stress, use thesuppliedcabletiestofastentheunitandthe

harness to a solid part of the bike. Make sure that the SH switches won’t be hit

accidentally.

6. IfyouwishtousetheTopSpeedRecallfeature,connect the 2-pole plug of the

remote button. Secure the remote button at the dashboard with the supplied cable

ties.

Ifyouwish,youcaneasilychangetheharnesslengthorreplacetheremotebutton

per your liking (any SPST momentary “push-to-make” switch can be used).

7. Please visit www.speedohealer.com and use our on-line calculator to generate

set-up instructions for your SH. Alternatively, refer to the User’s Guide for

instructions.