Herutu 21D-429C Manuale utente

Wireless Production Control Indicator

Controller

21D-429C

Instruction Manual V1.80

Please use this Instruction manual correctly on reading well.

Please keep it carefully to be able to read immediately, when required.

[21D] Notational Conventions for Series Model

Set (Controller+Display)

Machine

types

Items

Communica

tion

Display type

LED color

***

429

123

265

523

124

D5W

524

152

DEW

1523

1524

For the Controller only, the contents of 3 Communication are as follows:

429C

265C

For the Display only, the contents of 3 Communication are as follows:

429D

265D

485D

1. Machine types: D→Large-sized 4-digit Single side，D5→Large-sized 5-digit Single side，

DW→Large-sized 4-digit Double side, D5W→Large-sized 5-digit Double side，

DE→Middle-sized 5-digit Single side，DEW→Middle-sized 5-digit Double side

2. Item : 2 - 4 items

3. Communication:429→Specific small-current radio wave

265→Microradio wave

485→Wire-type

*For the 485 type, only the Display is available.

4. Display type :1→Target 2→Actual 3→Advancement 4→Accomplishment rate 5→Plan

5. LED color : G→Green, R→Red

*For the Middle-sized type, only red color is available.

To use this product in safety and comfort, (Be sure toread)

Thank you very much for purchasing our product.

This operation manual contains the precautions necessary for preventing an accident caused by the use

in an improper ways.

Read it carefully while thoroughly understanding the meanings of pictorial symbols.

Using in an improper way while ignoring this pictorial symbol might

cause a serious human injury.

Using in an improper way while ignoring this pictorial symbol might cause

a human injury or physical damage.

■The type of precautions that should be observed, are classified using the following pictorial symbols.

This pictorial symbol indicates a “Reminder”to attract an attention.

This pictorial symbol indicates a “Prohibition”to prohibit a certain action.

■For the usage to be commonly applied in all the models:

●Avoid using in a place with a plenty of humidity or dust. Otherwise, absorbing a dust

or water contents may cause machine trouble, fire or electrical shock.

■For handling this machine:

●This is the electronic devise or wireless radios composed of the precision parts.

Do not overhaul/remodel. It may cause accident or machine trouble.

！Warning

！Caution

！

tyuui

！Caution

■For handling this machine:

●Do not use this product for the application needing the high reliability

related to human lives.

●Do not use this product in a place where it is uncertain about whether or

not radio waves reach.

■For handling the power source:

Be sure to observe the following precautions to prevent the AC adapter and Power cord from being

heated, damaged or ignited.

●Do not approximate the AC adapter and Power cord to a fire, or do not put

them into a fire. The AC adapter and Power cord can be broken or ignited,

resulting in an accident.

●You can use theAC adapter and main body only with the specified power

voltage to protect them from the damage and fire accident.

●Do not use theAC adapter and main body in a wettable atmosphere.

It may cause accidents or troubles such as heating, igniting or electrical shock.

●Do not touch theAC adapter, main body, Power cord and Plug outlet with

wet hands. It may cause an electrical shock.

●Do not damage the Power cord.

A short-circuit or heating may cause a fire or electrical shock.

●Do not use the Power plug with dust being adhered.

A short-circuit or heating may cause a fire or electrical shock.

●Do not give a strong impact onto the AC adapter.

It may cause an accident or machine failure.

●If you find out deformedAC adapter, do not use it.

It may cause an accident or machine failure.

●do not use this product in a place where flammable gas can be generated.

It may cause a fire accident.

●Never overhaul theAC adapter.

It may cause an accident or machine failure.

■When trouble happens during use:

Since it may cause a fire or electrical accident, disconnect a power plug, and immediately ask outlet

store or our company torepair.

●When smoke or abnormal odors are generated, stop using, immediately

disconnect a power plug, and ask outlet store or our company torepair.

●Once the Power cord is damaged, do not use it.

Using it as is may cause a fire or electrical accident.

！

！Warning

※This operation manual is translated a product for Japan into English/

This product is based on Japanese Wireless law.

Before use:

This machine is awarded the certificate of conformance as the wireless equipment for “specific

small-current wireless station telemeter and tele-control”.

About the wireless equipment for telemeter and tele-control:

Wireless equipment for telemeter:

Wireless equipment for transmitting the signal intended for automatically displaying or

recording the measured results of measuring instrument at remote place using a radio wave.

Wireless equipment for tele-control:

Wireless equipment for transmitting the signal intended for starting, changing or terminating the

functions of device at remote place using a radio wave

1. Do not use it for the application which may possibly cause loss of human life or damage of other

equipment or units.

Also, do not use it near the units which may be malfunctioned by theradio wave emitted from

this machine.

2. Overhauling or remodeling the machine certified as the technical standard conformance is

prohibited by the law.

3. Do not peel the technical standard conformance certification label attached on the case.

Operating the machine with it being peeled off is an illegal act.

4. This machine is only for use in Japan.

Different Radio Law does not allow the application outside Japan.

It is also impossible to use it while the machine is being connected to the electrical

communication line.

5. The communication capacity may vary with the surrounding conditions. Make sure if

communication is possible before installation.

 
Contents 
 
1. General Description............................................................................................................ 1 
1-1. Scope............................................................................................................................1 
1-2. Outline ..........................................................................................................................1 
1-3. Type selection...............................................................................................................1 
2. Specifications ..................................................................................................................... 3 
3. Names and Functions of each section............................................................................... 6 
3-1. Names and Functions of each section.........................................................................6 
3-2. Terminal block...............................................................................................................8 
3-3. AC Adapter ...................................................................................................................9 
4. Installation methods ......................................................................................................... 10 
4-1. Installation of Controller..............................................................................................10 
4-2. I/O circuit.....................................................................................................................11 
5. Function settings .............................................................................................................. 13 
5-1. Function settings ........................................................................................................13 
5-2. Setting the equipment No. Command[0]..............................................................14 
5-3. Setting the wireless channel Command[1] ..........................................................14 
5-4. Setting the operation type Command [2].............................................................16 
5-5. Setting the digit-number Command [3]................................................................17 
5-6. Setting the tact precision Command [4]...............................................................17 
5-7. Setting with or without Tact reserve function Command [5] ................................18 
5-8. Setting with or without working hours Command [6] ...........................................20 
5-9. Setting the password function Command [7].......................................................21 
5-10. Setting the pre-scale Command [8]...................................................................22 
5-11. Setting with/without Advancement judging Command [9]................................23 
5-12. Setting the Transmit mode Command [10] ......................................................24 
5-13. Setting with/without latch display Command [11]...............................................26 
5-14. Setting with/without the stop a calculation at the PLAN=TARGET [12]...................26 
6. Basic operation................................................................................................................. 27 
6-1. Setting the Internal clock Key [4] .........................................................................33 
6-2. Setting the Working hour pattern Key [6]...........................................................34 
6-3. Setting the Working hour Key [5].........................................................................35 
6-4. Setting the Tact Key [0] ......................................................................................38 
6-5. Setting the Target Key [1]...................................................................................39 

 
 
 
6-6. Setting the Plans Key [1] or [2] ............................................................................40 
6-7. Setting the Actual Key[2] or [3]...........................................................................41 
6-8. Setting the Advancement Key [3] ...................................................................42 
6-9. Setting the Accomplishment rate Key [3].............................................................43 
6-10. Setting the Clear time Key [7] ..........................................................................44 
6-11. Setting the Pre-scale Key [8]..............................................................................45 
6-12. Setting theAdvancement judging function Key [9]............................................47 
7. Applied operation.............................................................................................................. 48 
7-1. Working setting 2，3-Setting the Tact reservation (With working hour)....................50 
7-2. Working setting A - Operation when “No” for working hour setting is set(Without Tact 
reserve function)................................................................................................................58 
7-3. Working setting B，C - Operation when “No” for working hour setting is set(With Tact 
reserve function)................................................................................................................61 
8. Handling precautions........................................................................................................ 62 
9. Maintenance..................................................................................................................... 62 
10. Warranty......................................................................................................................... 63 
Dimensional drawing............................................................................................................ 65 
 
 

21D-429C

General Description

1. General Description

1-1. Scope

This operation manual describes about the Controller [21D-429C] (hereinafter called “the

machine”) of Wireless Production Control Indicator [21D-429] Series.

For the Wireless Production Control Indicator [21D-429] Display, see another operation

manual.

1-2. Outline

The Production Control Indicator unit [21D-429] series consists of the Controller section and

Indicator section. This machine is the Controller for Wireless Production Control Indicator unit

[21D-429], which displays the contents of ever-processing process and the quantity of

production at your factory. Once combined with the Indicator unit, it helps you grasp the

present status of production at a glance and also provides you with a great effect on the

rationalization of production such as production process analysis, worker’s self-administration

and etc.

1-3. Type selection

The combination of “Target”, “Actual”, “Advancement”, Accomplishment rate”and “Plan”

allows you to select several kinds of types. Normally, the type is already set before shipment.

However, it can be changed after purchasing. You may select the item suitable for your

application after understanding the contents of each item. In this manual, the type is replaced

with the numeric value and alphabet.

Items

Contents

Numeric

notation

Alphabetical

notation

Target

The target quantity of production today

Actual

The quantity of production up to the present

Advancement

The degree of advancement in either “+”or “-“sign to

the planned quantity of production at the present

Accomplishment

rate

The Accomplishment rate (%) of actual to the planned

quantity of production at the present

Plan

The planned quantity of production at the present

21D-429C

General Description

Types

Numeric notation

Alphabetical notation

Target/Actual/Advancement

123

TAa

Plan/Actual/Advancement

523

PAa

Target/Actual/Accomplishment rate

124

TAt

Plan/Actual/Accomplishment rate

524

PAt

Target/Plan/Actual

152

TPA

Target/Plan/Actual/Advancement

1523

TPAa

Target/Plan/Actual/Accomplishment rate

1524

TPAt

●How to calculate each item

“Plan”=Elapsed time within working hours ÷Tact

“Accomplishment rate”(%) =(Actual÷Plan) x100

“Advancement”=Actual-Plan

* Decimal places of theAccomplishment rate are all cut off.

* If the Accomplishment rate is over 9999% or it cannot be calculated, “9999”appears for the

calculation results.

Indice

Altri manuali Herutu Strumento di misura

Herutu

Herutu 21UD Manuale utente

Herutu

Herutu SD-4 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente