HiBoost F27 Manuale utente
Table of contents
Table of contents
How it works
Package contents
Features
Booster’s port description
LCD Introduction
Control Button Operations
Manual Gain Control (MGC)
Install HiBoost Booster System
Trouble Shooting
Specications
Product Warranty
FCC RF Exposure Statement
IC RF Exposure Statement
Warnings
Before you install
Installation overview
1. Install Outdoor Antenna
2. Install Indoor Antenna
3. Install the signal booster
4. Booster Commissioning
2
3
3
5
5
6
8
8
9
20
21
21
22
22
23
2
9
9
10
12
13
13
3
How it works
Package contents
F27-5S is designed to help mobile users amplify weak signals of 2G, 3G and 4G.
They are bi-directional ampliers.
The donor antenna receives the signals from the cell tower, amplies it, and
transmits to the signal booster. Then the indoor antenna will receive the signal
and retransmit it to your mobile device.
The signals produced by your cell phone are also amplied by indoor antenna
via the booster and donor antenna (exterior antenna).
Outdoor and indoor antennas and cables are required for installation
(purchased separately).
F27-5S Industrial boosters cannot transmit signals without an outside and inside
antenna connected by a cable. F27-5S can install up to 15 indoor antennas.
However, we recommend installing up to 8 to 10 indoor antennas. The number
of antennas, length of cables or other accessories needed can vary according to
the size and make of the structure, exterior lack of signal strength, or where the
structure exists. Or you can contact us to nd out what you need.
1 Hiboost Industrial Booster
2 Adapter
3 Plastic Expansion bolt
4 Tapping Screw
5 User Manual
4
Multiple antenna installation Sample
Optional antenna kits Recommended
1. Outdoor Antenna 2. Booster 3. Indoor Panel Antenna
6. Omni ceiling antenna
RF cables (wide band) Yagi/ LPDA Antenna Panel Antenna
Dome Antenna Panel Antenna Omni Ceiling Antenna
Whip Antenna Lightning Protector Coupler
4. Coupler 5. Splitter
5
Cavity Splitter (2,3,4 way) Wilkinson Splitter (2, 3, 4 way)
Features
Booster’s port description
Embedded CPU, self-adaptive intelligent system to make booster system very
easy to install and better performance is guaranteed under complex and
constantly charging RF environment.
ISO: Intelligent isolation processing to avoid self-oscillation, quite wide adjusting
range to stabilize the signal strength/ quality for clearer voice/ higher data speed
and avoid interference to mobile network.
ALC: Intelligent ALC, quite wide adjusting range to improve the signal quality
for clearer voice and higher data speed.
LCD Display: Displays ISO status, ALC status, actual gain and downlink output
power that makes booster installation and troubleshooting much easier.
MGC: Control buttons to adjust the gain for both uplink and downlink
independently, 31 dB range.
Excellent RF performance, larger coverage area, clearer voice and higher
speed data services.
Elegant design, low power consumption to save cost during operation and
low heat dissipation.
The following image shows the key components of the booster. There are 4 parts:
rst part is LCD indicator, which will show the booster status. Second part is LED
indicators. Third part is control buttons. The forth part is connectors to the outdoor
antenna and indoor antenna. The following and graphs show the details.
.
6
1. LCD
5. Indoor antenna port 6. Power connector
2. Control Button 3. LED indicators 4. Outdoor antenna port
LCD Introduce
After the booster is on, gain and power will light up on the screen.
"Band" - Displays the working frequency. Find below the list of frequencies
displayed corresponding to the networks.
"ULdB" & "DLdB" - Gain indication.
The displayed value shows real-time uplink and downlink gain.
7
"Power dBm" - Power indication.
The displayed value shows real-time power. When booster's output power is
lower than -10dBm, the value will display “---“.
"ISO" - Isolation alarm indication.
When the booster doesn't have enough isolation between the outdoor and
indoor antennas, the "ISO" is ashing. Press "Query" key and LCD screen will
display "ISO" under the current band.
"ALC" - Strong receiving signal alarm indication.
When the booster is receiving to strong signal from outside, output power gets
overrated and "ALC" starts ashing. Press "Query" key and LCD screen will
display "ALC" under the current band.
"OFF" - Booster shut-o alarm indication.
When LCD screen is in "OFF" state and the booster shuts o, LCD screen will be ashing.
When LCD screen is "ON" and the booster shuts o, the "OFF" is ashing.
Press "Query" key and LCD screen will display "OFF" under the current band.
8
Control Button operation
Manual gain control (MGC)
There are 4 operation modes: Long press on "Query"
key, short press on "Query" key, short press on "UP"
and short press on "DOWN" key.
When LCD is in the alarm display mode, press "Query" key and LCD screen will
display alarm indication under the current band. Press "UP" (or "DOWN") key, LCD
will switch to help tips. If you don't operate LCD key within 30 seconds, LCD will
return to the xed display mode.
If you don't operate LCD key within 5 minutes, LCD screen will go to the "OFF"
state. Press any key and LCD will go back to the xed display mode.
Since the booster has intelligent software system, MGC attenuation is not
needed, except for the cases when you don't feel comfortable about ISO or ALC
ashing, or in some extreme cases you might need to attenuate gain value.
When LCD is in the xed display mode, press "Query" key for 3 seconds. It will
start up the Setting Mode and make the screen stay in the current status.
When LCD is in the xed display mode, press
"Query" key for 3s and it will start up Setting Mode.
Press "Query" key shortly, LCD will switch to the
next value (uplink or downlink gain for a
dierent band).
Press "Query" key for 3s, LCD will return to the
xed display mode (For more details refer to
"Manual gain control - MGC)."
Press "UP" (or "Down") key, the value of the current
item will change to the higher (or lower) one.
Press "Query" key shortly, LCD will switch to the next value (uplink or downlink
gain for a dierent band).
Press "UP" key once shortly, the gain will increase by 1 dB, press "DOWN" once
shortly, the gain will be reduced by 1dB.
Press "Query" key for 3 seconds, LCD will return to the xed display mode.
Press "Query" key for 3 seconds, LCD will return to the xed display mode.
9
Install Hiboost Booster system
with or to be 5dB less than downlink gain, uplink gain shouldn't be more than
downlink gain in order to avoid interference with mobile network.
Before you install
Installation overview
Make sure you have sucient cable length between proposed outdoor/indoor
antennas and the booster in case you don't purchase standard kits.
Make sure the position where you install the booster is near to one existing
electrical outlet, well ventilated, away from excessive heat, moisture, and
direct sunlight.
Install tools and accessories:
The booster has LCD display and intelligent self adaptive system, LCD displays
real time working state, and intelligent self-adaptive system can automatically
calculate and adjust the booster to obtain its best performance, so it is very
easy to install for user.
Step 1. Install your outdoor antenna on the roof where there is the strongest
signal.
Step 2. Install your indoor antenna where you want to improve the signal.
Step 3. Mount your signal booster, connect the cables to the signal booster from
outdoor antenna and indoor antenna at the designated ports, and connect
the booster to the AC supply (make sure all the cables are connected.)
General installation steps:
1. Outdoor Antenna 2. Booster 3. Indoor Antenna 4. Power Supply
1. Install Outdoor Antenna
1.1 How to nd the place with the strongest receiving signal.
The booster's main function is to improve weak RF signal inside a house, oce or
any other indoor area. The receiving strength of outdoor antenna and the strength
of the signal reception outdoors directly aect the eciency of indoor coverage.
That is why it is crucially important to install outdoor antenna at the point where
signal reception is the strongest.
There are two methods to nd the strongest receiving signal. One is to use
booster's LCD display, the other is to use mobile phone to test signal bars. We
would highly recommend you to use LCD display as this method is more accurate.
LCD Display Method.
Connect the outdoor antenna to the booster's outdoor port with an original
coaxial cable that comes in a kit and power on the booster. Fix the outdoor
antenna outside the window or on the top of the building and point it to the
nearest cell tower. Then have a look at gain and output power value displayed
on LCD.
Outdoor antenna receives the strongest signal when the booster's output
power reaches its full value. The place where you can reach it is the best to
mount outdoor antenna.
The booster's LCD display shows the gain and output power. Output power can
be checked below "Power dBm" on LCD display.
Remark: when ALC shows up ashing, it means the receiving signal power is
stronger than the system needs it. It is recommended to adjust outdoor antenna
position until ALC alarm disappears. Or you can leave it as it is to let the booster
self-adjust automatically. However when ALC ashes, and the displayed gain is
more than 30 dB less than rated gain value, try to adjust outdoor antenna to
decrease the receiving power.
10 https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali HiBoost Estensione
HiBoost
HiBoost Mini Series Manuale utente
HiBoost
HiBoost 4K Plus Manuale utente
HiBoost
HiBoost F10G-5S-LCD Manuale utente
HiBoost
HiBoost SLD+ Manuale utente
HiBoost
HiBoost F15G-CP Manuale utente
HiBoost
HiBoost Commercial 30K Pro Manuale utente
HiBoost
HiBoost Smart Link Series Manuale utente
HiBoost
HiBoost C27G-CP Manuale utente
HiBoost
HiBoost Hi10-17 Manuale utente
HiBoost
HiBoost Travel 4G 2.0 RV Manuale utente
HiBoost
HiBoost Home 10K Manuale utente
HiBoost
HiBoost 4K Smart Link Manuale utente
HiBoost
HiBoost Plus Series Manuale utente
HiBoost
HiBoost C27G-5S-BTW Manuale utente
HiBoost
HiBoost F12G-3S-BTW Manuale utente
HiBoost
HiBoost Mate Plus Series Manuale utente
HiBoost
HiBoost Hi13- 3S Manuale utente
HiBoost
HiBoost Easy Vehicle 2S C27G-CP Manuale utente
HiBoost
HiBoost Plus Series Manuale utente
HiBoost
HiBoost Mini Series Manuale utente
