High Sec Labs SC21H-3 Manuale utente
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
HDC15012 Rev. 1.1
Models:
SC21H-3 –Secure 2-Port HDMI Video KVM Combiner, PP 3.0
SC21H-3 | QUICK SETUP GUIDE
Secure 2-Port KVM Combiner
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
TABLE OF CONTENTS
2
Introduction
3
HSL Secure 2-Port KVM Combiner Switch 3
Installation
4
Installing the Combiner 4
Operation
6
Operating Modes Overview 6
Operating in User Mode 7
Selecting Display Layouts 8
Full-Screen Mode 8
Side-By-Side Mode 9
Picture-In-Picture Mode 9
Custom Mode 10
Switching Channel Control 11
Configuring the Settings -in Admin Mode 12
On-Screen Display Modes 13
Channel Menu Options 14
Main Menu Options 15
Additional Settings 16
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
INTRODUCTION
HSL Secure 2-Port KVM Combiner Switch
HSL’s Secure 2-Port KVM Combiner enables viewing
and controlling two computers:
•On the same display
•Using asingle set of keyboard, mouse, USB, and
audio peripherals
HSL’s KVM Combiner is the only product that combines
ascaler, multi-viewer, KVM switch, and video-wall
controller -built into one.
The KVM Combiner was built according to multiple
international-security standards.These assure total
isolation.So, no data leaks between the two connected
computers, via the switch or the connected
peripherals.
This guide tells you how to install, operate, and
configure an HSL Secure 2-Port KVM Combiner.
3
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
INSTALLATION
Installing the Combiner
Step 1 -Combiner Installation
1. Verify that all peripherals and computers are turned OFF
before connecting them to the Combiner.
2. To the Combiner’s Console ports, connect the keyboard,
display, mouse, and audio peripherals.
3. To the Combiner’s computer ports -for each of the two
computers -connect the keyboard, display, mouse, and
audio cables. Make sure that each computer cable is
connected to the same computer-port group.
4
Note:The two computers are represented by push buttons on the
product’s front panel.Once the Combiner is powered ON,
you can switch peripherals between the computers, by
pressing either button.
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
INSTALLATION
Step 2 -Power ON the Combiner
1. Turn ON both PCs.
2. Connect the power supply and power ON the
Combiner. The Combiner boots up, as follows:
•If you are using the Combiner for the first
time, the default display mode is picture-in-
picture (PiP).
•Otherwise, the Combiner boots into the
display mode used during the previous
power on, including either:
−Full-screen -either channel #1 only
or channel #2 only
−Picture-in-picture (PiP)
−Side-by-side
−Custom mode
5
Note:In case no picture is presented after powering on the Combiner,
connect an alternate display to the combiner’s display console port, or
perform areset to factory default.
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
OPERATION
Operation Modes Overview
The Combiner operates in two modes:
•User mode (default) -User mode is the KVM Combiner’s
normal use mode. User mode lets you:
Change between a wide variety of display layouts
Switch mouse-and-keyboard control between the
two computers
•Admin mode -Admin mode is the KVM Combiner’s
configuration mode. Admin mode lets you set, for example,
the:
Combiner resolution
Custom channel window size and layout
Channel frame and title display
Channel aspect ratio
6
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
OPERATION
Operating in User Mode
The User mode (default) is the KVM Combiner’s normal use
mode.
To enter User mode, press: Left Ctrl | Left Ctrl | u
Note: To clear all settings and restore the device to its original
configuration, press: Left Ctrl | Left Ctrl | F11 | r
This section shows you how to:
•Change between a wide variety of display layouts
•Switch mouse-and-keyboard control between the two
computers
7
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
OPERATION
Selecting Display Layouts
There are four display modes available in User mode:
•Full-screen
•Side-by-side
•Picture-in-picture (PiP)
•Custom
8
Full-Screen Mode
In full-screen mode, only one of the two computers is
displayed (in full-screen).
To display in full-screen mode:
1. Press: Left Ctrl | Left Ctrl | z
This displays Channel #1 in full-screen mode.
2. Then, to swap Channel #2 into full-screen mode,
press: Left Ctrl | Left Ctrl | w
Channel #1
Channel #2
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
OPERATION
Side-By-Side Mode
In side-by-side mode, one computer is displayed on the LEFT,
and the other, on the RIGHT.
To display in side-by-side mode:
1. Press: Left Ctrl | Left Ctrl | s
This displays Channel #1 ,on the LEFT and Channel #2,
on the RIGHT.
2. Then, to swap positions, press: Left Ctrl | Left Ctrl | w
9
Picture-In-Picture Mode
In picture-in-picture (PiP) mode, one computer is displayed
full-screen, while the other is displayed as a floating small-
sized window, in the lower right-hand corner.
To display in picture-in-picture mode:
1. Press: Left Ctrl | Left Ctrl | p
This displays Channel #1, in full-screen and Channel #2,
as a small window.
1. Then, to swap positions, press: Left Ctrl | Left Ctrl | w
Channel
#1
Channel
#2 Channel #1
Channel
#2
Channel #2
Channel
#1
Channel
#2
Channel
#1
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents SECTIONS 123
OPERATION
Custom Mode
Custom mode lets you display a pre-configured custom-
designed layout.
Note: To learn how to configure a custom-designed layout
and save it as a preset for future use, see the Main Menu
Options section.
To display the Custom-mode display preset:
1. Press: Left Ctrl | Left Ctrl | c
Here is an example of a possible Custom-mode-display
preset:
10
Channel
#2
Channel
#1
2. Then, to swap positions, press: Left Ctrl | Left Ctrl | w
For the example above, Channels #1 and #2 swap places.
Channel
#1
Channel
#2
Altri manuali per SC21H-3
2
