HighPoint SSD7101A-1 Manuale utente

1

SSD7101A-1

4x M.2 Port to PCIe 3.0x16 NVMe RAID Controller

Quick Installation Guide

V1.05

2

System Requirements

PC Requirements

•System with a free PCIe 4.0 x16 or PCIe3.0 x16 slot

•Windows 11, 10 / Server 2022, 2019, 2016, 2012R2 / Microsoft

Hyper-V

•RHEL/Debian/Ubuntu/Fedora/Proxmox/Xenserver /Rocky Linux

(Linux kernel 3.10 and later)

•Arch Linux (Kernel 5.17.5 and above)

•macOS 10.13.6 ~ macOS 13.x

SSD7101A-1 Kit Contents

•SSD7101A-1 Controller Card

•Quick Installation Guide

3

SSD7101A-1 Hardware

Front View

Low-Noise cooling fan

Aluminum casing with integrated thermal pad

PCIe 3.0 x16 Host Interface

Intake for cooling fan

4

Hardware Installation:

Step 1. On the rear of the SSD7101A-1, remove the six screws that

secure the unit’s front panel to the PCB.

After removing the screws, carefully remove the front panel from the

SSD7101A-1.

Step 2. After removing the casing, carefully turn it over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, however, it can also prevent the

thermal pad form conducting the heat away from the NVMe SSD's if

we don't remove it.

5

Step 3. These 4 screws are used to install the NVMe SSD’s.

Step 4. The SSDs should be installed from top to bottom. Remove the

top screw.

Step 5. Gently insert the SSD into the slot.

6

Note: Please make sure all disks are clean before you insert them

into the slot to avoid unexpected situations.

Step 6. Refasten the screw to secure the SSD.

Repeat Steps 4 to 6 to install the remaining SSDs.

Note: Make sure the SSDs are carefully, but securely installed into

each M.2 port. Loose connections can cause a variety of stability

and performance issues, and may ultimately result in data loss.

The following example shows four SSDs installed into Port 1, 2, 3

& 4;

Step 7. Replace the front panel after installing all SSDs.

Port

Port

Port

Port

7

Step 8. On the rear of the SSD7101A-1, refasten the 6 screws that were

removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the SSD7101A-1. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD’s and controller componentry, which may result in damage

to the SSD’s or controller hardware, performance loss, unstable I/O,

and the loss of data.

Note: Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note: Install the driver in the system first and then install the board

!

8

Resources

A variety of manuals, guides and FAQ’s are available for the

SSD7101A-1 RAID controller.

In addition, we recommend visiting the Software Downloads webpage

for the latest drivers, management interfaces, and installation guides.

For Software Downloads, Documentation and more information

about this product, please visit the following website:

https://www.highpoint-tech.com/gen3-nvme-m2-non-bootable

FAQ & Troubleshooting:

FAQ - HighPoint Technologies, Inc. (helpjuice.com)

9

Customer Support

If you encounter any problems while utilizing the SSD7101A-1, or have

any questions about this or any other HighPoint Technologies, Inc.

product, feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/support-and-services

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

© Copyright 2022 HighPoint Technologies, Inc. All rights reserved.

Altri manuali per SSD7101A-1

3

Indice

Altri manuali HighPoint Controllori

HighPoint

HighPoint RocketRAID 2840A Manuale utente

HighPoint

HighPoint RocketU 1142A Manuale utente

HighPoint

HighPoint ATA-133 RAID Manuale utente

HighPoint

HighPoint Rocket 700L Series Manuale utente

HighPoint

HighPoint SSD7000 Series Manuale utente

HighPoint

HighPoint SSD7180 Manuale utente

HighPoint

HighPoint RocketRAID 3G mini-SAS HBA Series Manuale utente

HighPoint

HighPoint RocketRAID 37 Series Manuale utente

HighPoint

HighPoint SSD7505 Manuale utente

HighPoint

HighPoint SSD7580A Manuale utente

HighPoint

HighPoint SSD7103 Manuale utente

HighPoint

HighPoint SSD7580B Manuale utente

HighPoint

HighPoint SSD7749E Manuale utente

HighPoint

HighPoint Rocket 700 Series Manuale utente

HighPoint

HighPoint RR37 8 28 Series Manuale utente

HighPoint

HighPoint SSD7120 Manuale utente

HighPoint

HighPoint SSD7103 Manuale utente

HighPoint

HighPoint Rocket 700 Series Manuale utente

HighPoint

HighPoint SSD7110 Manuale utente

HighPoint

HighPoint RocketRAID 644L Manuale utente

HighPoint

HighPoint RocketRAID mini SAS 3G HBA Series Manuale utente

HighPoint

HighPoint SSD7103 Manuale utente

HighPoint

HighPoint RocketRAID 2711 Manuale utente

HighPoint

HighPoint SSD7580B Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente