HighPoint RocketStor 6314A Manuale utente
1
RocketStor 6314A
Thunderbolt™2 Hardware RAID
4-Bay Storage Enclosure
Quick Installation Guide
V1.01
2
Table of Contents
Table of Contents ....................................................................................2
HighPoint RocketStor 6314A..................................................................3
Kit Contents............................................................................................4
RocketStor 6314A Hardware ..................................................................4
Setup Enclosure.......................................................................................6
Setup the RocketStor 6314A under Mac.................................................9
Setup RocketStor 6314Aunder Windows .............................................11
Customer Support .................................................................................13
3
HighPoint RocketStor 6314A
HighPoint's RocketStor 6314AThunderbolt™ Storage Solution delivers
up to 32 terabytes of high-performance, hardware RAID storage from a
single cable connection!
The fully integrated hardware RAID controller and removable disk
modules were designed for today's fastest 6Gb/s storage devices -
perfect for professional, I/O intensive applications such as digital
content creation and media post production. The ROCKETSTOR
6314A's robust, stylish aluminum construction ensures your storage
stays cool while running at optimum efficiency.
Key Features
Stylish, compact and Whisper-Quiet Enclosure
Thunderbolt™ 2 interface with 20Gbps of throughput in both
channels
3.5” and 2.5” SAS/SATA Removable Disk Tray Module
RAID level 0, 1, 10, 5, 6 & JBOD
Comprehensive Storage Management Suite
4
Kit Contents
Enclosure x 1
Disk Tray x 4 (Installed)
Hard Disk Drive mounting screw x 2 set (3.5” and 2.5”)
Thunderbolt™ cable x 1
Power Cord x 1
RocketStor 6314A Hardware
Panel Layout-Front View
Device Present & Active LED: Solid/Flash Blue - HDD Access Indicator
Device Status LED: Solid/Flash Red - Device Failure / Rebuilding Indicator
Enclosure Power LED: Solid Blue - Power on Indicator
5
Panel Layout-Rear View
Thunderbolt connectors: Connecting Thunderbolt cables
AC Power IN receptacle: Connecting AC power cord.
Power switch: Enclosure power switch.
6
Setup Enclosure
1. Place the RocketStor 6314A on a
level surface and remove each
disk tray.
2. Carefully insert the 3.5” or 2.5” disk into each disk tray and secure
them with the provided mounting screws.
For 3.5” disk: Use the 3.5” screw (black color) to mount the disk to
the disk tray on the side.
7
For 2.5” disk: Use the 2.5” screw (silver color) to mount the disk to
the disk tray on the bottom
3. Connect the RocketStor 6314A
to the host system with the
Thunderbolt cable, and then
connect the RocketStor 6314A
with a power source.
8
4. With the power cord connected to the
power source, turn on the RocketStor
6314A using the power switch on the
rear panel (switch to the “I” position
to power on the RocketStor 6314A).
5. RocketStor 6314A is designed to be powered on and powered off
simultaneously with the HOST system, when the RocketStor
6314A is connected to the HOST system with the Thunderbolt
cable. Therefore, power on HOST first –the RocketStor 6314A will
automatically power on.
9
Setup the RocketStor 6314A under Mac
1. Verify the RocketStor 6314A’s RAID Controller driver. Following
step 1, check to make sure the “Driver Installed” status for the
RocketRAID 4520 SAS Controller is “Yes”. If you are using OS X
10.9.x (Mavericks), the driver is natively supported by the OS. If
you are using OS X 10.8.x (Mountain Lion) or earlier, you will
need to download and install the driver for the RocketStor
6314A’s RAID controller. To download the driver, please visit the
RocketStor 6314Aproduct page on:
http://www.hptmac.com
After verifying the RAID driver, download the RocketStor
6314A’s Web RAID Management interface (WebGUI). The
WebGUI is available from the RocketStor 6314A product page on
http://www.hptmac.com
10
2. After downloading and installing the WebGUI, open the WebGUI
by double-clicking the icon found on the desktop:
Use the default user name: RAID and password: hpt to login.
To learn how to use the WebGUI, please visit:
http://www.highpoint-tech.com/help/en/r_content.html#logical1
3. After the new RAID volume has been configured, OS X will
display a pop-up window.
Select Initialize button to start the disk utility.
Altri manuali per RocketStor 6314A
3
Indice
Altri manuali HighPoint Allegato
HighPoint
HighPoint RocketStor 6414TS Manuale utente
HighPoint
HighPoint SSD6540 Manuale utente
HighPoint
HighPoint RocketStor 6124V Manuale utente
HighPoint
HighPoint SSD6540M Manuale utente
HighPoint
HighPoint Thunderbolt TurboBox NA211TB Manuale utente
HighPoint
HighPoint RocketStor 6414TS Manuale utente
HighPoint
HighPoint RocketStor 6674T Manuale utente
HighPoint
HighPoint RocketStor 6418TS Aggiornamento firmware
HighPoint
HighPoint RocketStor 6614V Manuale utente
HighPoint
HighPoint SSD6780A Manuale utente
HighPoint
HighPoint RocketStor 6421TS Manuale utente
HighPoint
HighPoint RocketStor 6628A Manuale utente
HighPoint
HighPoint SSD6444M Manuale utente
HighPoint
HighPoint RocketMate 220 Manuale utente
HighPoint
HighPoint RocketAIC 7505HW Series Manuale utente
HighPoint
HighPoint RocketStor 6314A Manuale utente
HighPoint
HighPoint RocketStor 6314A Manuale utente
HighPoint
HighPoint RocketStor 6422TS Manuale utente
HighPoint
HighPoint SSD6540M Manuale utente
HighPoint
HighPoint SSD6540 Manuale utente
