HIK VISION DS-2CD6D82G0-IHS Manuale utente

Mobile Network Camera

Quick Start Guide

served.

This Manual is the property of Hangzhou Hikvision Digital Technology Co.,

Ltd. or its aliates (hereinaer referred to as “Hikvision”), and it cannot

be reproduced, changed, translated, or distributed, parally or wholly, by

any means, without the prior wrien permission of Hikvision. Unless oth-

erwise expressly stated herein, Hikvision does not make any warranties,

guarantees or representaons, express or implied, regarding to the Manu-

al, any informaon contained herein.

About this Manual

The Manual includes instructions for using and managing the Product.

Pictures, charts, images and all other informaon hereinaer are for de-

scripon and explanaon only. The informaon contained in the Manual is

subject to change, without noce, due to rmware updates or other rea-

sons. Please nd the latest version of this Manual at the Hikvision website

(hp://www.hikvision.com/en/).

Please use this Manual with the guidance and assistance of professionals

trained in supporng the Product.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the

properes of Hikvision in various jurisdicons. Other trademarks and lo-

gos menoned below are the properes of their respecve owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANU-

AL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”.

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR

FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU

IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU

FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAM-

AGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS

PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF

SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH

OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR

OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF

HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR

LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR IN-

HERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPON-

SIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS IN-

SPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION

WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE

LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR

USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPON-

SIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE

ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION,

RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PRO-

TECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PROD-

UCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR

PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT

OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVI-

TIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE

NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE AP-

PLICABLE LAW, THE LATER PREVAILS.

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not expressly approved by

the party responsible for compliance could void the user’s authority to oper-

ate the equipment.

FCC compliance: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residenal installaon. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accor-

dance with the instrucons, may cause harmful interference to radio commu-

nicaons. However, there is no guarantee that interference will not occur in

a parcular installaon. If this equipment does cause harmful interference to

radio or television recepon, which can be determined by turning the equip-

ment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC condions

This device complies with part 15 of the FCC Rules. Operaon is subject to the

following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operaon.

EU Conformity Statement

This product and - if applicable - the supplied accessories too

are marked with "CE" and comply therefore withthe applicable

harmonized European standards listed under the the EMC

Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery directive):

This product contains a battery that cannot be disposed of

as unsorted municipal waste in the European Union. See the

product documentation for specific battery information. The

battery is marked with this symbol, which may include lettering

to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For

proper recycling, return the battery to your supplier or to a

designated collection point. For more information see: www.

recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

Safety Instrucon

These instrucons are intended to ensure that the user can use

the product correctly to avoid danger or property loss.

Laws and Regulaons

The device should be used in compliance with local laws,

electrical safety regulations, and fire prevention regulations.

Transportaon

Keep the device in original or similar packaging while

transporting it.

Power Supply

The input voltage should conform to IEC60950-1 standard: SELV

(Safety Extra Low Voltage) and the LPS (Limited Power Source).

Refer to the appropriate documentation for detailed information.

DO NOT connect multiple devices to one power adapter, to avoid

over-heating or fire hazards caused by overload.

Make sure the plug is properly connected to the power socket.

System Security

The installer and user are responsible for password and security

configuration and its settings.

Baery

Improper use or replacement of the battery may result in

explosion hazard. Replace with the same or equivalent type only.

Dispose of used batteries in conformance with the local codes.

L’utilisation ou le remplacement inadéquats de la pile peuvent

entraîner un risque d’explosion. Remplacez-la par le même type

ou l’équivalent du même type seulement. Jetez les piles usagées

conformément aux directives fournies par le fabricant de la pile.

Maintenance

If the product does not work properly, please contact your

dealer or the nearest service center. We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.

A few device components (e.g., electrolytic capacitor) require

regular replacement. The average lifespan varies, so periodic

checking is recommended. Contact your dealer for details.

Cleaning

Please use a soft and dry cloth when clean inside and outside

surfaces of the product cover. Do not use alkaline detergents.

Using Environment

When any laser equipment is in use, make sure that the device

lens is not exposed to the laser beam, or it may burn out.

Do not expose the device to high electromagnetic radiation or

dusty environments.

For indoor-only device, place it in a dry and well-ventilated

environment.

Do not aim the lens at the sun or any other bright light.

Make sure the running environment meets the requirement of

the device. The operating temperature shall be -30 °C to 60 °C

(-22°F to 140 °F) or -40 °C to 60 °C (-40°F to 140 °F) , and the

operating humidity shall be 95% or less (no condensing).

Do not place the camera in extremely hot, cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

Emergency

If smoke, odor, or noise arises from the device, immediately turn

off the power, unplug the power cable, and contact the service

center.

Time Synchronizaon

Set up camera time manually for the first time access if the

local time is not synchronized with that of the network. Visit the

camera via Web browse/client software and go to time settings

interface.

Installaon

Make sure the device is firmly secured to any wall or ceiling

mountings.

Be sure that there is enough space to install the camera and

accessories.

Make sure that the device in the package is in good condition

and all the assembly parts are included.

Make sure that the wall is strong enough to withstand at least 4

times the weight of the camera and the mount.

The standard power supply is 12 VDC, please make sure your

power supply matches with your camera.

Make sure that the power has been disconnected before you

wire, install, or disassemble the device.

Make sure that no reflective surface is too close to the camera

lens. The IR light from the camera may reflect back into the lens

causing reflection.

For device with this sticker, this device is intended

for installation in a restricted access location,

access can only be gained by service persons or by

users who have been instructed about the reasons for the

restrictions applied to the location and about any precautions

that shall be taken.

Symbols and Marks

Notice

Warning

Forbidden

Correct

Incorrect

Turn to page A and continue.

i. Not necessarily included accessory.

ii. Variable accessory amount.

iii. Skip this step if not required.

MicroSD card

Grounding

Disposal

Purchase separately

Other situations

Other situations omitted

Waterproof

Skip this step if not necessary

Installation

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali HIK VISION Telecamera di sicurezza

HIK VISION

HIK VISION DS-2CD2T87G2-L Manuale utente

HIK VISION

HIK VISION DS-2CD762MF-FBH Series Manuale utente

HIK VISION

HIK VISION DS-2CD1001-I Manuale utente

HIK VISION

HIK VISION DS-2TXS2628-7P/QA/GLT/CH30S80 Manuale utente

HIK VISION

HIK VISION TURBO HD 5 MP Manuale utente

HIK VISION

HIK VISION UD04294B Manuale utente

HIK VISION

HIK VISION DS-2CD854F-E series Manuale utente

HIK VISION

HIK VISION DS-2CD7126G0-IZS-B Manuale utente

HIK VISION

HIK VISION Network Speed Dome Camera Manuale utente

HIK VISION

HIK VISION NETWORK CAMERA Manuale utente

HIK VISION

HIK VISION DS-2CE11D0T-PIRLO Manuale utente

HIK VISION

HIK VISION DS-2CD783F-EI Manuale utente

HIK VISION

HIK VISION Network Mini Dome Camera Manuale utente

HIK VISION

HIK VISION DS-2AE4215T-D Manuale utente

HIK VISION

HIK VISION DS-2CE11H0T-PIRLP Manuale utente

HIK VISION

HIK VISION DS-2TD8166-180ZE2F-V2 Manuale utente

HIK VISION

HIK VISION DS-2CE56H1T-VPIT3Z Manuale utente

HIK VISION

HIK VISION DS-2CD2722FWD-IS Manuale utente

HIK VISION

HIK VISION DS-2CD855-E Guida utente

HIK VISION

HIK VISION TURBO HD DF7T Series Manuale utente

HIK VISION

HIK VISION DS-2TD95C8-190ZK2FL/W Manuale utente

HIK VISION

HIK VISION DS-2CD23 Series Manuale utente

HIK VISION

HIK VISION Network Dome Camera Manuale utente

HIK VISION

HIK VISION DS-2CD7126G0-IZS Manuale dell'operatore

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente