Hilti pd-e Manuale utente
1
2
3
4
*2068470* 2068470 English 1
English
1 Information about the operating instructions
1.1 About these operating instructions
• Read these operating instructions before the product is used or operated
for the first time. This is a prerequisite for safe, trouble-free handling and
use of the product.
• Observe the safety instructions and warnings in these operating instruc-
tions and on the product.
• Always keep the operating instructions with the product and make sure
that the product is accompanied by these operating instructions only,
when the product is given to other persons.
1.2 Explanation of symbols
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the
product. The following signal words are used:
DANGER
DANGER !
▶Draws attention to imminent danger that will lead to serious personal
injury or fatality.
WARNING
WARNING !
▶Draws attention to a potential threat of danger that can lead to serious
injury or fatality.
CAUTION
CAUTION !
▶Draws attention to a potentially dangerous situation that could lead to
personal injury or damage to the equipment or other property.
1.2.2 Symbols in the operating instructions
The following symbols are used in these operating instructions:
Comply with the operating instructions
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household
waste
2 English 2068470 *2068470*
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these
operating instructions.
The numbers in illustrations refer to important work steps or to com-
ponents important for the work steps. In the text, the corresponding
numbers draw attention to these work steps or components, e.g. (3).
Item reference numbers are used in the overview illustration and
refer to the numbers used in the key in the product overview sec-
tion.
This symbol is intended to draw your special attention to certain
points for handling the product.
1.3 Product-dependent symbols
1.3.1 General symbols
Symbols used in relation to the product.
If applied on the product, the product has been certified by this cer-
tification body for the US and Canadian markets according to the
applicable standards.
KCCREM-HLTPD-E
On/off button
Measure button
Menu button
Delete (clear) button
Right arrow button
Left arrow button
1.4 Product information
products are designed for professional users and only trained,
authorized personnel are permitted to operate, service and maintain the
products. This personnel must be specifically informed about the possible
hazards. The product and its ancillary equipment can present hazards if
used incorrectly by untrained personnel or if used not in accordance with
the intended use.
The type designation and serial number are printed on the rating plate.
*2068470* 2068470 English 3
▶Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Laser range meter PD-E
Generation 01
Serial no.
1.5 Laser information on the product
Laser information → page 3
Laser information
Laser Class 2 based on the IEC60825-1 / EN60825-
1:2007 standard in compliance with CFR 21 § 1040
(Laser Notice 50).
Laser Class 2: Do not stare into the beam. Do not di-
rect the beam toward other persons or toward areas in
which other persons, who are not involved in the work
with lasers, may be present.
Recycle waste material.
2 Safety
2.1 Safety instructions
2.1.1 Basic information concerning safety
In addition to the safety rules listed in the individual sections of these
operating instructions, the following rules must be strictly observed at
all times. The product and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when used not as directed.
▶Keep all safety instructions and information for future reference.
▶Stay alert, watch what you are doing and use common sense when
working with the product. Do not use the product while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating the product may result in serious personal
injury.
▶Do not render safety devices ineffective and do not remove information
and warning notices.
▶If the product is opened improperly, laser radiation in excess of Class 2
may be emitted. Have the product repaired only by Hilti Service.
▶Tampering with or modification of the product is not permitted.
▶Check that the product functions correctly each time before use.
4 English 2068470 *2068470*
▶Measurements taken through panes of glass or other objects may be
inaccurate.
▶The measurement may be incorrect if the conditions under which the
measurement is taken change rapidly, e.g. due to people walking through
the path of the laser beam.
▶Do not point the product toward the sun or other powerful light sources.
▶Take the influences of the surrounding area into account. Do not use the
tool where there is a risk of fire or explosion.
▶Observe the information printed in the operating instructions concerning
operation, care and maintenance.
2.1.2 General safety rules
▶Check the product for damage before use. Have the damage repaired
by Hilti Service.
▶Check the accuracy of the product after it has been dropped or subjected
to other mechanical stresses.
▶Although the product is designed for the tough conditions of jobsite use,
as with other measuring instruments it should be treated with care.
▶Products which are not in use must be stored in a dry, high place or
locked away out of reach of children.
▶The product is not intended for use by children.
▶Observe the national health and safety requirements.
2.1.3 Proper preparation of the working area
▶Avoid unfavorable body positions when working from ladders. Make
sure you have a safe stance and that you stay in balance at all times.
▶Secure the site at which you are taking measurements and take care to
avoid directing the laser beam toward other persons or toward yourself.
▶When the product is brought into a warm environment from very cold
conditions, or vice-versa, allow it to become acclimatized before use.
▶Use the product only within its specified limits.
▶Keep the laser exit window clean in order to avoid measurement errors.
▶Observe the accident prevention regulations applicable in your country.
2.1.4 Working safely with laser tools
▶Laser Class 2/Class II tools may be operated only by appropriately
trained persons.
▶Laser beams should not be projected at eye height.
▶Precautions must be taken to ensure that the laser beam does not
unintentionally strike highly reflective surfaces.
▶Precautions must be taken to ensure that persons do not stare directly
into the beam.
▶The laser beam must not be allowed to project beyond the controlled
area.
▶Switch the laser tool off when it is not in use.
*2068470* 2068470 English 5
▶Store laser tools, when not in use, in places to which unauthorized
persons have no access.
2.1.5 Electromagnetic compatibility
Although the device complies with the strict requirements of the applicable
directives, Hilti cannot entirely rule out the possibility of interference to the
device caused by powerful electromagnetic radiation, possibly leading to
incorrect operation. Check the accuracy of the device by taking measure-
ments by other means when working under such conditions or if you are
unsure. Likewise, Hilti cannot rule out the possibility of interference with
other devices (e.g. aircraft navigation equipment). The tool complies with
the requirements of class A; The possibility of interference occurring in a
domestic environment cannot be excluded.
Only for Korea: This laser range meter is suitable for commercial and
industrial use and for the electromagnetic radiation encountered in this field
(Class A). Users must pay attention to this point and make sure that this
laser range meter is not used in occupied living areas.
3 Description
3.1 Overview of the product 1
@Rear contact surface
;Reference indicator LED for
rear contact
=Left arrow button
%Menu button
&“Measure” button
(Graphic display
)Reference indicator LED for
front contact
+Side “Measure” button
§On/off button
/Right arrow button
:Hand strap attachment point
∙Delete (clear) button
$¹/₄ inch thread
£Folding spike
|Laser emitting and receiving
lens
¡Optical sight
Q¹/₄ inch thread
3.2 Intended use
The product described is a laser range meter. It is designed for taking indi-
vidual measurements as well as the continuous measurement of distances.
Distances can be measured from all stationary targets without a highly
reflective surface, i.e. concrete, stone, wood, plastic, paper, etc. The use of
prisms or other highly reflective targets is not permissible and, if attempted,
may falsify the results.
The product is approved for use with batteries of the type AAA.
6 English 2068470 *2068470*
3.3 Explanation of the display
Main menu
Select angle unit
Determine painter’s area
Single Pythagoras
Measure areas and volumes
Select special functions
Select trapezoid function
Select Pythagoras function
At least one right angle is required for horizontal and diagonal dis-
tances.
Select settings
Measure indirectly
No specific angle is required for measurements on non-moving ob-
jects such as walls.
Generally applicable symbols
Battery charge state
Measuring spike not folded out
Measuring spike folded out
Measure
Add distances
Subtract distances
Select
Do not select
Select measuring time
Select calculator
Angle units submenu
Inclination in percent
Metric units
Imperial units
Inclination in angular degrees
Altri manuali per pd-e
5
Indice
Lingue:
Altri manuali Hilti Strumento di misura
Hilti
Hilti PRE 3 Manuale utente
Hilti
Hilti PD-S Manuale utente
Hilti
Hilti pd-e Manuale utente
Hilti
Hilti PD 40 Manuale utente
Hilti
Hilti PR 30-HVS A12 Manuale utente
Hilti
Hilti PMA 31-G Manuale utente
Hilti
Hilti PR 2-HS Manuale utente
Hilti
Hilti PP10 Manuale utente
Hilti
Hilti PD 5 Manuale utente
Hilti
Hilti DST 10-E Manuale utente
Hilti
Hilti PRA 38 Manuale utente
Hilti
Hilti PRI 36 Manuale utente
Hilti
Hilti PD-I Manuale utente
Hilti
Hilti PP10 Manuale utente
Hilti
Hilti PRI 36 Manuale utente
Hilti
Hilti PS 200 S Manuale utente
Hilti
Hilti PMC 46 Manuale utente
Hilti
Hilti HILTI PD-C Manuale utente
Hilti
Hilti PD 32 Manuale utente
Hilti
Hilti POS 18 Manuale utente
