Hioki 3805 Manuale utente

3805

DIGITAL HiTESTER

INSTRUCTION MANUAL

Contents

Introduction i

Inspection i

Safety Notes ii

Notes on Use viii

Chapter 1 Overview 1

1.1 Product Overview 1

1.2 Features 2

Chapter 2 Names and Functions of Parts 3

2.1 Push Buttons 4

2.2 Rotary Switch 7

2.3 Input Terminal 8

2.4 LCD Display Illustration 9

Chapter 3 Measurement Procedures 11

3.1 Voltage Measurement 13

3.1.1 AC Voltage Measurement 14

3.1.2 Frequency Measurement 15

3.1.3 DC Voltage Measurement 16

3.2 Diode Check 17

3.3 Resistance Measurement 19

3.4 Current Measurement 21

3.4.1 AC Current Measurement 22

3.4.2 Frequency Measurement 23

3.4.3 DC Current Measurement 24

3.5 Capacitance Measurement 25

3.6 Temperature Measurement 27

Chapter 4 Special Functions Instructions 31

4.1 Data Hold 32

4.2 Refresh Hold 33

4.3 Dynamic Recording 34

4.4 Harmonic Ratio Measurement 37

4.5 Relative (Zero) 38

4.6 % of mA Measurement (4-20mA) 39

4.7 Beeper On/Off 40

4.8 Set Up 41

4.8.1 Timer Setting for Auto-power Save 42

4.8.2 Selecting % Display for 4 to 20 mA 43

4.8.3 Selecting J/ k Types and / Display 44

4.9 Communication (RS-232C) 45

Chapter 5 Specifications 47

5.1 General Specifications 47

5.2 Accuracy Chart 51

Chapter 6 Maintenance and Service 57

6.1 Changing the Battery and Fuses 57

6.2 Cleaning 60

6.3 Service 60

_______________________________________________

Introduction

_______________________________________________

Introduction

Inspection

Thank you for purchasing the HIOKI "3805

DIGITAL HiTESTER". To obtain maximum

performance from the product, please read this

manual first, and keep it handy for future reference.

When you receive the product, inspect it carefully to

ensure that no damage occurred during shipping. If

damage is evident, or if it fails to operate according

to the specifications, contact your dealer or Hioki

representative.

Accessories

3851-10 TEST LEAD (a pair) 1

Protective holster 1

Instruction Manual 1

6F22 manganese battery 1

(built into this unit, for monitor)

_______________________________________________

Safety Notes

_______________________________________________

WARNING

This product is designed to conform to IEC 61010

Safety Standards, and has been thoroughly tested

for safety prior to shipment. However,

mishandling during use could result in injury or

death, as well as damage to the product. Be

certain that you understand the instructions and

precautions in the manual before use. We

disclaim any responsibility for accidents or

injuries not resulting directly from product

defects.

Safety Notes

iii

_______________________________________________

Safety Notes

_______________________________________________

The symbol printed on the product

indicates that the user should refer to a

corresponding topic in the manual

(marked with the symbol) before

using the relevant function.

In the manual, the symbol indicates

particularly important information that

the user should read before using the

product.

Indicates a double-insulated device.

Indicates DC (Direct Current).

Indicates AC (Alternating Current).

Indicates both DC and AC.

Indicates grounding terminal.

Indicates that dangerous voltage may be

present at this terminal.

This manual contains information and warnings

essential for safe operation of the product and for

maintaining it in safe operating condition. Before

using the product, be sure to carefully read the

following safety notes.

Safety symbols

_______________________________________________

Safety Notes

_______________________________________________

DANGER

Indicates that incorrect operation

presents an extreme hazard that could

result in serious injury or death to the

user.

WARNING

Indicates that incorrect operation

presents a significant hazard that could

result in serious injury or death to the

user.

CAUTION

Indicates that incorrect operation

presents a possibility of injury to the

user or damage to the product.

NOTE

Advisory items related to performance

or correct operation of the product.

The following symbols in this manual indicate the

relative importance of cautions and warnings.

_______________________________________________

Safety Notes

_______________________________________________

We define measurement tolerances in terms of f.s.

(full scale), rdg. (reading) and dgt. (digit) values,

with the following meanings:

f.s. (maximum display value or scale length)

The maximum displayable value or the full length of

the scale. This is usually the maximum value of the

currently selected range.

rdg. (reading or displayed value)

The value currently being measured and indicated

on the measuring product.

dgt. (resolution)

The smallest displayable unit on a digital measuring

product, i.e., the input value that causes the digital

display to show a "1".

_______________________________________________

Safety Notes

_______________________________________________

Measurement categories (Overvoltage

categories)

This product conforms to the safety requirements for

CAT II (1000V), CATIII (600V) measurement

products.

To ensure safe operation of measurement product,

IEC 61010 establishes safety standards for various

electrical environments, categorized as CAT I to

CAT IV, and called measurement categories. These

are defined as follows.

CAT I : Secondary electrical circuits connected to

an AC electrical outlet through a

transformer or similar device.

CAT II : Primary electrical circuits in equipment

connected to an AC electrical outlet by a

power cord (portable tools, household

appliances, etc.)

CAT III : Primary electrical circuits of heavy

equipment (fixed installations) connected

directly to the distribution panel, and

feeders from the distribution panel to

outlets.

CAT IV : The circuit from the service drop to the

service entrance, and to the power meter

and primary overcurrent protection device

(distribution panel).

Indice

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente