Hioki BT5525 Istruzioni per l’uso

Revision 02

BT5525 Sample Application Manual

Overview

BT5525 Sample Application (this application) can perform the following operations on the BT5525:

Setting for BT5525

Display of measured values (measurement or update of measured values at specified time

intervals)

Backup and Restoration of the instrument's settings

Sending and receiving communication commands

Displaying and saving monitor data

Displaying and saving BDD data

System requirements

CPU: 1 GHz or greater

Memory: 512 MB or more

OS: Windows10, Windows11

Microsoft .NET Framework 6.0

Interface: USB 2.0 (virtual COM port), LAN

Monitor resolution: 1024 x 768 dots or greater

Hard disk: 5 MB free space or more (However, if .NET Framework 6.0 is not installed,

approximately 2.5 GB is required separately)

Installing the application

1. Double-click “ setup_BT5525 Sample Application.exe”.

2. The installer screen will appear.

3. Click Next every time when it appears.

4. Installation will begin. When the installation is complete, a shortcut icon

will be created on the desktop.

Uninstalling the application

Windows10, 11

The application can be uninstalled by opening the Windows Setting, choosing Apps.

Connecting the instrument to your computer

Connecting the instrument via USB

Works with standard Windows drivers.

Revision 02

Connecting the instrument via LAN

You’ll need a LAN cross cable.

Launching and connecting to the application

1. Double-click the application’s shortcut on the desktop. The measurement screen will be

displayed.

2. Select the Function and Interface then click [Connect].

3. If you get an error message like the one on the right,

please make sure that you are using the correct IP address and port.

Also, the port may be used by other applications.

Application interface

This application will force the following settings upon connection. When the application is closed, the

following settings will be restored to the original settings at the time of connection.

※If it does not exit successfully or cannot communicate on exit, the settings remain as follows.

・Response of measured value and status. :MEASure:VALid 255

・Command monitor OFF.

・Automatic data output setting OFF.

Revision 02

Selecting the delimiter character for text (CSV) files

This application has the ability to save data to a text (CSV) file

You can set the separator used for data delimitation from the menu.

Please set the separator according to your environment.

・Comma (",") separator

・Semicolon (";") separator

Revision 02

Insulation Resistance Test

Operate this instrument from the application to perform an insulation resistance test.

Overview of Main Screen

When this application is launched, it synchronizes with the settings of the instrument.

When you change the settings on the screen, the settings on the instrument will

automatically change as well. Please note that if you change the settings from the

instrument, the settings on the screen will not be reflected.

Displays measurement results.

You can set up and check the instrument.

Displays the measured value.

Press the button to

perform the TEST,

which can also be

operated with the

F5/F4 keys.

Interval Measurement

Records test results at

each set time interval.

Revision 02

MEAS1、MEAS2

All test settings that can be configured on the instrument can be changed.

COMPARATOR SETTING

Reflects the setting in this instrument.

PANEL

Saves the settings to the specified panel

number. If panel data already exists, it is

overwritten.

Loads the settings for the specified panel

number.

Renames the specified panel number. (Max.

10 single-byte alphanumeric characters)

Deletes the setting of the specified panel

number.



Specify the panel number.

Revision 02

SYS, IF

[RESET] : The settings of the instrument other than the communication settings and panel

are initialized.

LAN: To change the LAN settings, press [Reflect]. The instrument's LAN settings will not be

changed until [Reflect] is pressed; if a LAN connection has been made, it will be

reconnected.

Some functions cannot be set from the application.

INFO

Information on this instrument can be checked.

Obtains error information from the instrument.

For details on various errors, refer to the

":SYSTem:ERRor?" command page in the instrument's

instruction manual.

Revision 02

Various Tools

The following windows open from [Tool] on the top toolbar.

When the window is closed, it returns to the original screen.

The instrument will be synchronized with the instrument at that time.

Command test

Send and receive arbitrary commands.

Backup

Backs up the instrument's settings and saves a

dedicated settings file.

Check the items to be backed up and click [Backup]

to open the folder selection screen. When "Complete

Backup" is displayed, the backup is complete. If

multiple PANELs are set up, it may take some time.

Restore

Restore the instrument's settings from the dedicated

settings file created by the above backup.

Press [File] and select the backup file from the

folder.

Press [Restore] to execute the restoration, which is

complete when "Complete Restore" is displayed. If

multiple PANELs are set up, it may take some time.

Revision 02

BDD Analysis

Insulation resistance test is performed, and when the test stops, monitor voltage and current values

(reference values) from the start of the test are acquired, displayed on the data grid, and waveforms

are displayed on the graph.

Waveform data can be saved as CSV. (Note that this is different from the actual detection waveform

of the BDD function.)

Overview of Main Screen

When this application is launched, it synchronizes with the settings of this instrument.

When the screen settings are changed, the settings of this unit are automatically changed as

well.

You can set up and check the instrument.

Displays monitor data and BDD data acquired

after the test.

Press the button to perform the test.

Display a graph of monitored data

and a list of test results.

Revision 02

SETTING

Graph setting

Sets the number of waveforms sampled.

Sets the degree to which sampled waveforms

are thinned out. Larger values result in lower

resolution, but allow acquisition of waveforms of

longer duration.

The recording time with the above settings is

shown.

If checked, the voltage and current graphs are

displayed separately.

BDD setting

Enable BDD setting, set threshold

CCV: Detects V in CC (charging) state

CVV: Detects V in CV (steady) state

CVI: Detects I in CV (steady) state

When turned ON, the test is stopped when the

BDD count reaches 1 or more.

TEST

When checked, the test status of this instrument is

monitored; check this box if you want to control the

test with EXT I/O. The operation of this instrument

will not be possible because it will always be in the

remote state (RMT). Uncheck the check box if you

want to operate the instrument.

Displays the test status of the instrument.

IDLE: Waiting

TEST: Testing

DISCHARGE: Discharging

INTERLOCK: Waiting at interlock

Displays measurement results.

Displays the number of BDD

counts and their breakdown.

Revision 02

BDD data / MONITOR data

After the test STOP, it is read from the

instrument and the display is updated.

It can be saved as CSV by [SAVE].

Vmoni and Imoni are reference values.

BDD data displays the result when BDD

COUNT is 1 or more, and the unit of BDD value

is [V] when Type is CCV or CVV, and [%] when

CVI.

Note that the % of CVI is a percentage of the

BT5525's own reference value and cannot be

converted to a current value.

Graph / TEST data

Graph

Displays monitor value

waveforms of voltage and

current.

Displays the detection time and

magnitude of BDD as dots with

bars.

Move, zoom in/out, and copy

images on the graph by mouse

operation.

Check boxes allow you to switch

between showing/hiding the

waveforms and fixing the axes.

TEST data

Lists the test results.

For details, refer to the

":MEASure?" and

":CONTactcheck:CAPacitance?"

command pages of the instrument's

user manual.

Altri manuali per BT5525

Indice

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente