Hirschmann RS20 series Manuale utente
Industrial Protocols
Release
5.0
04/09
Technical Support
User Manual
Industrial Protocols
Industrial ETHERNET (Gigabit-)Switch
RS20/RS30/RS40, MS20/MS30, OCTOPUS, RSR20/RSR30,
Power MICE, MACH 100, MACH 1000, MACH 4000
With software L2E, L2P, L3E or L3P
The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2009 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use. For devices with embedded software, the end-user license agreement on the en-
closed CD applies.
The performance features described here are binding only if they have been expressly guaran-
teed in the contract. This publication has been created by Hirschmann Automation and Control
GmbH according to the best of our knowledge. Hirschmann reserves the right to change the con-
tents of this manual without prior notice. Hirschmann can give no guarantee in respect of the
correctness or accuracy of the details in this publication.
Hirschmann can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
Printed in Germany
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
Rel. 5.0 -01-04/09 – 23.4.09
Content
Industrial Protocols
Release
5.0
04/09 3
Content
Content 3
About this Manual 5
Key 7
1 Industry Protocols 9
2 EtherNet/IP 13
2.1 Integration in Control System 14
2.2 EtherNet/IP Parameters 17
2.2.1 Identity Objekt 17
2.2.2 TCP/IP Interface Object 18
2.2.3 Ethernet Link Object 20
2.2.4 Ethernet Switch Agent Object 22
2.2.5 I/O Data 24
2.2.6 Mapping of the Ethernet Link Object Instances 25
2.2.7 Supported services 26
3PROFINETIO 27
3.1 Integration in Control System 30
3.1.1 Preparing the Switch 30
3.1.2 Configuration of the PLC 31
3.1.3 Configuring the device 37
3.1.4 Swapping devices 38
3.1.5 Swapping modules 39
3.1.6 Monitoring the network 40
3.2 PROFINET IO Parameters 44
3.2.1 Alarms 44
3.2.2 Record parameters 44
3.2.3 I/O Data 49
A GSD/EDS File Generator 53
B Reader´s comments 54
Content
4Industrial Protocols
Release
5.0
04/09
C Index 57
D Further support 59
About this Manual
Industrial Protocols
Release
5.0
04/09 5
About this Manual
The “Industry Protocols” user manual describes how the device is connected
by means of a communication protocol commonly used in the industry, such
as EtherNet/IP and PROFINET.
The following thematic sequence has proven itself in practice:
XDevice configuration in line with the “Basic Configuration” user manual
XCheck on the connection Switch <–> PLC
XProgram the PLC
The “Installation” user manual contains a device description, safety instruc-
tions, a description of the display, and all the other information that you need
to install the device before you begin with the configuration of the device.
The “Redundancy Configuration” user manual contains all the information
you need to select a suitable redundancy procedure and configure it.
You will find detailed descriptions of how to operate the individual functions
in the “Web-based Interface” and “Command Line Interface” reference
manuals.
The Network Management Software HiVision/Industrial HiVision provides
you with additional options for smooth configuration and monitoring:
XConfiguration of multiple devices simultaneously.
XGraphical interface with network layouts.
XAuto-topology discovery.
XEvent log.
XEvent handling.
XClient / Server structure.
XBrowser interface
XActiveX control for SCADA integration
XSNMP/OPC gateway
About this Manual
6Industrial Protocols
Release
5.0
04/09
Key
Industrial Protocols
Release
5.0
04/09 7
Ke y
The designations used in this manual have the following meanings:
Symbols used:
XList
Work step
Subheading
Link Indicates a cross-reference with a stored link
Note: A note emphasizes an important fact or draws your
attention to a dependency.
Courier ASCII representation in user interface
Router with firewall
Switch with firewall
Router
Switch
Bridge
Hub
Key
8Industrial Protocols
Release
5.0
04/09
A random computer
Configuration Computer
Server
PLC -
Programmable logic
controller
I/O -
Robot
Industry Protocols
Industrial Protocols
Release
5.0
04/09 9
1 Industr y Pr otocols
For a long time, automation communication and office communication were
on different paths. The requirements and the communication properties were
too different.
Office communication moves large quantities of data with low demands with
respect to the transfer time. Automation communication moves small
quantities of data with high demands with respect to the transfer time and
availability.
While the transmission devices in the office are usually kept in temperature-
controlled, relatively clean rooms, the transmission devices used in
automation are exposed to wider temperature ranges. Dirty, dusty and damp
ambient conditions make additional demands on the quality of the
transmission devices.
With the continued development of communication technology, the demands
and the communication properties have moved closer together. The high
bandwidths now available in Ethernet technology and the protocols they
support enable large quantities to be transferred and exact transfer times to
be defined.
With the creation of the first optical LAN to be active worldwide, at the
University of Stuttgart in 1984, Hirschmann laid the foundation for industry-
compatible office communication devices. Thanks to Hirschmann's initiative
with the world's first rail hub in the 1990s, Ethernet transmission devices such
as switches, routers and firewalls are now available for the toughest
automation conditions.
The desire for uniform, continuous communication structures encouraged
many manufacturers of automation devices to come together and use
standards to aid the progress of communication technology in the automation
sector. This is why we now have protocols that enable us to communicate via
Ethernet from the office right down to the field level.
Industry Protocols
10 Industrial Protocols
Release
5.0
04/09
Figure 1: Example of communication.
Hirschmann switches support the following industry protocols and systems
XEtherNet/IP
XPROFINET
InputOutput
Ethernet Input
Output
Altri manuali per RS20 series
20
Questo manuale è adatto per i seguenti modelli
11
Indice
Altri manuali Hirschmann Router di rete
Hirschmann
Hirschmann GECKO 4TX Manuale utente
Hirschmann
Hirschmann RS20 series Manuale utente
Hirschmann
Hirschmann RSR20-0900 Manuale utente
Hirschmann
Hirschmann GigaLION-24TP Manuale utente
Hirschmann
Hirschmann RS20 series Manuale utente
Hirschmann
Hirschmann RS20 series Manuale utente
Hirschmann
Hirschmann MICE MS20-0800 Series Manuale utente
Hirschmann
Hirschmann HiSecOS EAGLE20 Manuale utente
Hirschmann
Hirschmann RS20 series Manuale utente
Hirschmann
Hirschmann Power MICE Manuale utente
Hirschmann
Hirschmann RSB20-0800T1T1 Manuale utente
Hirschmann
Hirschmann SPIDER 3TX-TAP Manuale
Hirschmann
Hirschmann RS20 series Manuale utente
Hirschmann
Hirschmann MACH 1020 Manuale utente
Hirschmann
Hirschmann RS2-5TX/FX Manuale
Hirschmann
Hirschmann HiSecOS EAGLE20 Manuale utente
Hirschmann
Hirschmann OWL 4G Europe Manuale utente
Hirschmann
Hirschmann RS20 series Manuale del proprietario
Hirschmann
Hirschmann SPIDER Premium Line Manuale utente
Hirschmann
Hirschmann OCTOPUS 5TX-EEC Manuale
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza