Hirschmann RS20 series Manuale utente

RM GUI L2E

Release

8.0

05/2013

Technical Support

https://hirschmann-support.belden.eu.com

Reference Manual

GUI Graphical User Interface

Industrial ETHERNET (Gigabit-)Switch

RS20/RS30/RS40, MS20/MS30

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Rel. 8.0 - 05/2013 – 30.04.2013

Contents

RM GUI L2E

Release

8.0

05/2013 3

Contents

About this Manual 7

Key 9

Opening the Graphical User Interface 11

1 Basic Settings 17

1.1 System 18

1.2 Modules (MS, PowerMICE, MACH102 and MACH4000) 22

1.3 Network 25

1.4 Software 28

1.4.1 View the software versions presenton the device 29

1.4.2 Restoring the Backup Version 29

1.4.3 TFTP Software Update 29

1.4.4 TFTP Bootcode Update 30

1.4.5 HTTP Software Update 31

1.4.6 Automatic software update by ACA 31

1.5 Port Configuration 32

1.6 Power over ETHERNET 35

1.7 Load/Save 38

1.7.1 Loading a Configuration 39

1.7.2 Saving the Configuration 46

1.7.3 URL 48

1.7.4 Deleting a configuration 49

1.7.5 Using the AutoConfiguration Adapter (ACA) 49

1.7.6 Cancelling a configuration change 51

1.8 Restart 53

2 Security 55

2.1 Password / SNMPv3 access 56

2.2 SNMPv1/v2 Access Settings 59

2.3 Telnet/Web Access 62

2.3.1 Description of Telnet Access 63

2.3.2 Description of Web Access (http) 63

Contents

4RM GUI L2E

Release

8.0

05/2013

2.4 Port Security 65

2.5 Login Banner 71

3 Time 73

3.1 Basic Settings 74

3.2 SNTP configuration 77

3.3 PTP (IEEE 1588) 81

3.3.1 PTP Global (MS20/MS30, PowerMICE, MACH 104,

MACH 1040) 84

3.3.2 PTP Version 1 (MS20/MS30, PowerMICE,

MACH 104, MACH 1040) 88

3.3.3 PTP Version 2 (BC) (MS20/MS30, PowerMICE,

MACH 104, MACH 1040) 90

3.3.4 PTP Version 2 (TC) (MS20/MS30, PowerMICE,

MACH 104, MACH 1040) 97

4 Switching 103

4.1 Switching Global 104

4.2 Filter for MAC addresses 108

4.3 Rate Limiter 111

4.3.1 Rate limiter settings 112

4.4 Multicasts 114

4.4.1 IGMP (Internet Group Management Protocol) 114

4.5 VLAN 121

4.5.1 VLAN Global 121

4.5.2 Current VLAN 125

4.5.3 VLAN Static 127

4.5.4 Port 130

5 QoS/Priority 133

5.1 Global 134

5.2 Port Configuration 138

5.2.1 Entering the port priority 139

5.3 802.1D/p mapping 140

5.4 IP DSCP mapping 142

Contents

RM GUI L2E

Release

8.0

05/2013 5

6 Redundancy 145

6.1 Ring Redundancy 146

6.1.1 Configuring the HIPER-Ring 148

6.1.2 Configuring the MRP-Ring 152

6.2 Ring/Network Coupling 156

6.2.1 Preparing a Ring/Network Coupling 156

6.3 Spanning Tree 162

6.3.1 Global 164

6.3.2 Port 170

7 Diagnostics 179

7.1 Syslog 180

7.2 Trap log 184

7.3 Ports 186

7.3.1 Statistics table 186

7.3.2 Network load (Utilization) 188

7.3.3 SFP Transceiver 190

7.4 Topology Discovery 192

7.4.1 LLDP Information from Neighbor Devices 192

7.5 Port Mirroring 194

7.6 Device Status 197

7.7 Signal contact 200

7.7.1 Manual Setting 200

7.7.2 Function monitoring 201

7.7.3 Device status 202

7.7.4 Configuring Traps 203

7.8 Alarms (Traps) 205

7.9 Report 208

7.9.1 System Information 210

7.9.2 Event Log 211

7.10 IP address conflict detection 212

7.11 MAC Notification 214

7.11.1 Operation 214

7.11.2 Configuration 215

7.11.3 Table 215

Contents

6RM GUI L2E

Release

8.0

05/2013

7.12 Self Test 217

7.13 Service Mode 219

7.13.1 Activating the service mode 220

7.13.2 Deactivating the service mode 222

8 Advanced 223

8.1 DHCP Relay Agent 224

8.2 Industrial Protocols 227

8.2.1 PROFINET 227

8.2.2 EtherNet/IP 230

8.2.3 IEC61850 MMS Protocol (RSR, MACH 1000) 231

8.3 Software DIP Switch overwrite (MICE, PowerMICE and RS) 233

8.4 Command Line 235

A Appendix 237

A.1 Technical Data 238

A.2 List of RFCs 239

A.3 Underlying IEEE Standards 241

A.4 Underlying IEC Norms 242

A.5 Literature references 243

A.6 Copyright of Integrated Software 244

A.6.1 Bouncy Castle Crypto APIs (Java) 244

A.6.2 Broadcom Corporation 245

B Index 247

C Readers’ Comments 249

D Further Support 251

About this Manual

RM GUI L2E

Release

8.0

05/2013 7

About this Manual

The “GUI” reference manual contains detailed information on using the

graphical interface to operate the individual functions of the device.

In the following, the GUI (Graphical User Interface) will be referred as Web-

based Interface.

The “Command Line Interface” reference manual contains detailed

information on using the Command Line Interface to operate the individual

functions of the device.

The “Installation” user manual contains a device description, safety

instructions, a description of the display, and the other information that you

need to install the device.

The “Basic Configuration” user manual contains the information you need to

start operating the device. It takes you step by step from the first startup

operation through to the basic settings for operation in your environment.

The “Redundancy Configuration” user manual document contains the

information you require to select the suitable redundancy procedure and

configure it.

The “Industry Protocols” user manual describes how the device is connected

by means of a communication protocol commonly used in the industry, such

as EtherNet/IP or PROFINET IO.

About this Manual

8RM GUI L2E

Release

8.0

05/2013

The Industrial HiVision Network Management Software provides you with

additional options for smooth configuration and monitoring:

Simultaneous configuration of multiple devices

Graphical user interface with network layout

Auto-topology discovery

Event log

Event handling

Client/server structure

Browser interface

ActiveX control for SCADA integration

SNMP/OPC gateway.

Maintenance

Hirschmann is continually working to improve and develop our software.

You should regularly check whether there is a new version of the software

that provides you with additional benefits. You will find software

information and downloads on the product pages of the Hirschmann

website.

Key

RM GUI L2E

Release

8.0

05/2013 9

Key

The designations used in this manual have the following meanings:

Symbols used:

List

Work step

Subheading

Link Cross-reference with link

Note: A note emphasizes an important fact or draws your attention to a dependency.

Courier ASCII representation in user interface

WLAN access point

Router with firewall

Switch with firewall

Router

Switch

Bridge

Key

10 RM GUI L2E

Release

8.0

05/2013

Hub

A random computer

Configuration Computer

Server

PLC -

Programmable logic

controller

I/O -

Robot

Altri manuali per RS20 series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Hirschmann Router di rete

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann HiSecOS EAGLE20 Manuale utente

Hirschmann

Hirschmann MACH104-20TX-F Series Manuale utente

Hirschmann

Hirschmann OWL3G Manuale utente

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann RSR20-0900 Manuale utente

Hirschmann

Hirschmann MACH 4000 Series Manuale utente

Hirschmann

Hirschmann RS2-5TX/FX Manuale

Hirschmann

Hirschmann MM2-2FXM3/2TX1 Manuale

Hirschmann

Hirschmann OWL-IPG-AMERICAS Manuale utente

Hirschmann

Hirschmann RSB20 Manuale utente

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann OCTOPUS 5TX-EEC Manuale

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann RS20 series Manuale utente

Hirschmann

Hirschmann OWL 4G Europe Manuale utente

Hirschmann

Hirschmann RS2-FX-LH/FX-LH Manuale

Hirschmann

Hirschmann MICE MS20 Manuale utente

Hirschmann

Hirschmann MICE MS20-0800 Series Manuale utente

Hirschmann

Hirschmann HiSecOS EAGLE20 Manuale utente

Hirschmann

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS Manuale utente

Hirschmann

Hirschmann GECKO 4TX Manuale utente

Hirschmann

Hirschmann HiSecOS EAGLE20 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza