Honeywell 4820HDHM Manuale utente

™

2020/4820/4820i

2D Cordless Imaging System

User’s Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in speci-

fications and other information contained in this document without prior notice,

and the reader should in all cases consult HII to determine whether any such

changes have been made. The information in this publication does not repre-

sent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained

herein; nor for incidental or consequential damages resulting from the furnish-

ing, performance, or use of this material.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied, repro-

duced, or translated into another language without the prior written consent of

HII.

Other product names or marks mentioned in this document may be trademarks

or registered trademarks of other companies and are the property of their

respective owners.

Web Address: www.honeywell.com/aidc

Hand Held Products/Dolphin/Metrologic products have no affiliation with Honey-

well branded batteries/chargers, which are exclusively distributed by Global

Technology Systems pursuant to a license agreement.

Microsoft® Pocket PC 2002, Windows®, Windows NT®, Windows 2000, Win-

dows ME, Windows XP, ActiveSync®, Outlook®, and the Windows logo are

trademarks or registered trademarks of Microsoft Corporation.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc.

Other product names or marks mentioned in this document may be trademarks

or registered trademarks of other companies and are the property of their

respective owners.

Product Agency Compliance

USA

FCC Part 15 Subpart C

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

Caution: Any changes or modifications made to this equipment not

expressly approved by Honeywell may void the FCC

authorization to operate this equipment.

UL Statement

UL listed: UL60950-1.

Canada

Industry Canada

This device complies with Canadian RSS-210. Operation is subject to the

following conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may

cause undesired operation.

Conformité à la règlementation canadienne

Cet appareil ISM est conforme à la norme CNR-210 du Canada. Son

fonctionnement est assujetti aux conditions suivantes :

1. Cet appareil ne doit pas causer de brouillage préjudiciable.

2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le

brouillage pouvant causer un fonctionnement indésirable.

cUL Statement

cUL listed: CSA C22.2 No.60950-1-03 for I.T.E product safety.

Europe

The CE mark on the product indicates that this device is in

conformity with all essential requirements of the 1999/5/EC R&TTE

Directive. In addition, complies to 2006/95/EC Low Voltage

Directive, when shipped with recommended power supply. For

further information please contact:

Honeywell Imaging & Mobility Europe BV

International Inc.

Nijverheidsweg 9-13

5627 BT Eindhoven

The Netherlands

Honeywell shall not be liable for use of our product with equipment (i.e.,

power supplies, personal computers, etc.) that is not CE marked and does

not comply with the Low Voltage Directive. This equipment is intended for

use throughout the European Community and has been assessed to the

following standards:

EN 300 328

EN 301 489-1

EN 301 489-17

EN60950-1

EN60825-1

Waste Electrical and Electronic Equipment

Information

Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN

PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic

equipment (WEEE).

This product has required the extraction and use of natural resources for its

production. It may contain hazardous substances that could impact health

and the environment, if not properly disposed.

In order to avoid the dissemination of those substances in our environment

and to diminish the pressure on the natural resources, we encourage you to

use the appropriate take-back systems for product disposal. Those systems

will reuse or recycle most of the materials of the product you are disposing in

a sound way.

The crossed out wheeled bin symbol informs you that the product

should not be disposed of along with municipal waste and invites you to use

the appropriate separate take-back systems for product disposal.

If you need more information on the collection, reuse, and recycling systems,

please contact your local or regional waste administration.

You may also contact your supplier for more information on the

environmental performances of this product.

Germany

If your product is marked with the GS symbol, then the product has

been issued a GS certificate showing compliance to IEC 60950-1

and IEC 60825-1.

Australia/NZ

C-Tick Statement

Conforms to AS/NZS 3548 EMC requirements.

Japan (4820i, 2020-5B)

Complies with Technical Regulations Conformity Certification of Specified

Radio equipment.

Mexico

Safety approval conforms to NOM-019.

Comision Federal de Telecomunicaciones (radio aprobación)

International

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY

AN INCORRECT TYPE. The battery should be disposed of by a

qualified recycler or hazardous materials handler. Do not incinerate

the battery or dispose of the battery with general waste materials.

Eye Safety Statement

LED

This device has been tested in accordance with IEC60825-1 LED safety, and

has been certified to be a Class 1 LED device.

Laser Eye Safety Statement

If the following label is attached to your product, it indicates the product

contains a laser engine or laser aimer:

This device has been tested in accordance with and complies with

IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except for

deviations pursuant to Laser Notice No. 50, dated July 26, 2001.

LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT,

1.0 mW MAX OUTPUT: 650nM.

Caution: Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

Radio Technology

Class II

CB Scheme

Certified to CB Scheme IEC 60950-1.

LASER LIGHT. DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

1.0 mW MAX OUTPUT:650nM

IEC60825-1: 1993+A1+A2

Complies with 21 CFR 1040.10 and 1040.11

except for deviations pursuant to Laser

Notice No.50, dated July 26, 2001.

Solids and Water Protection

The 4820 has a rating of IP41, immunity of foreign particles and dripping

water.

The 4820i has a rating of IP54, immunity of foreign particles and sprayed

water.

Patents

Please refer to product packaging for patent information.

Required Safety Labels

Scanner

Compliance

Label locations

Item Number,

Serial Number

and Revision

Information

location

Base

Compliance

Label

locations

Item Number,

Serial

Number and

Revision

Information

location

Altri manuali per 4820HDHM

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Honeywell Lettore di codici a barre

Honeywell

Honeywell MS9535-5 Manuale utente

Honeywell

Honeywell MX7 Tecton Manuale utente

Honeywell

Honeywell MS7320 InVista Manuale utente

Honeywell

Honeywell Solaris MS7820 Manuale utente

Honeywell

Honeywell XL 800 Series Manuale utente

Honeywell

Honeywell 7820 Solaris Manuale utente

Honeywell

Honeywell MX7 Tecton Manuale utente

Honeywell

Honeywell Xenon XP 1950h Manuale utente

Honeywell

Honeywell Dolphin 99GX Manuale utente

Honeywell

Honeywell 2020-5 Manuale utente

Honeywell

Honeywell 3800r Manuale utente

Honeywell

Honeywell Granit 1280i Manuale utente

Honeywell

Honeywell 4800i Manuale utente

Honeywell

Honeywell MS4980 Manuale utente

Honeywell

Honeywell VoyagerGS 9590 Series Manuale utente

Honeywell

Honeywell VoyagerCG MS9540 Manuale utente

Honeywell

Honeywell 3800G04-USBKITE Manuale utente

Honeywell

Honeywell 5010 Manuale utente

Honeywell

Honeywell Genesis 7580G Manuale utente

Honeywell

Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Manuale utente

Honeywell

Honeywell 3800gPDF - Hand Held Decoding Linear Imager Manuale utente

Honeywell

Honeywell MS5145 - 00 Manuale utente

Honeywell

Honeywell Voyager 1602g Manuale utente

Honeywell

Honeywell XENON 1900 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente