Honeywell 8680i Series Manuale utente

8680i

Wearable Scanner

Quick Start Guide

8680-EN-QS Rev (a)

3/18

Preliminary

Draft3/13/18

Overview

Note: The battery must be fully charged before the first use. An

MB4-BAT-SCN02 or an MB4-SCN02 Charging Station

must be purchased separately.

Battery

Right button

Left button

Trigger Scanner

User window

Battery

latch

Attach the Scanner to Your Hand

1. Slide your fingers into the loosened strap.

2. Pull the strap to secure to your fingers.

Right or Left Handed Operation

To release the finger trigger, turn over the scanner. Slide the

latch toward the user window to release the finger trigger. Turn

the finger strap around and snap it into place to change the

operation to the correct hand.

Power Up the Scanner

Press the trigger for 10 seconds to power up the scanner. The

battery, WiFi, and Bluetooth status appears in the window.

Wrist Position When Scanning

How to Scan a Bar Code

The 8680i scanner has a view finder that projects a bright aimer

line. This aimer line should be centered over the bar code, but it

can be positioned in any direction for a good read.

Warning: Do not stare directly into the laser beam.

Linear bar codes 2D Matrix symbol s

The aimer line is smaller when the scanner is closer to the code

and larger when it is farther from the code. Symbologies with

smaller bars or elements (mil size) should be read closer to the

unit. Symbologies with larger bars or elements (mil size) should

be read farther from the unit. To read single or multiple symbols

(on a page or on an object), hold the scanner at an appropriate

distance from the target, press the trigger, and center the aimer

line on the symbol. If the code being scanned is highly reflective

(e.g., laminated), it may be necessary to tilt the code up 15° to

18° to prevent unwanted reflection.

Connect the Scanner via Bluetooth

Pair with a Bluetooth Device Using a HID Keyboard

The 8680i scanner can pair with host Bluetooth devices such as

personal computers, laptops, and tablets. This is the default set-

ting for an 8680i scanner. Follow the steps below to establish

one-way communication with the host device.

1. Scan the appropriate Bluetooth HID Keyboard Connect bar

code below.

2. Set your host device so it searches for other Bluetooth

devices. (Refer to your host device’s User’s Guide for pairing

instructions.)

3. Once your host device has located the scanner, select the

8680i scanner name from the list displayed.

4. Some host devices automatically pair with the scanner. If

your host device automatically pairs with the scanner, it

displays a successful pairing message and you do not need

to continue to the next step.

* Bluetooth HID Keyboard

Connect

Bluetooth HID Japanese

Keyboard Connect

5. Some PDT hosts display a prompt for a PIN. Ignore this

message.

6. If your host device does not automatically pair with the

scanner, a PIN is displayed. This PIN must be scanned

within 60 seconds. Using the scanner, you must quickly

scan Bluetooth PIN Code below, then scan the numeric bar

code(s) for the PIN code from the chart below, then scan the

Save bar code.

Bluetooth PIN Code

The Bluetooth symbol appears in the scanner window when the

scanner pairs with a host.

Pair with an Android™ Device

The 8680i scanner can pair with Android devices.

1. Set your Android device so it searches for other Bluetooth

devices. (Refer to your Android device’s User’s Guide for

pairing instructions.)

2. Scan the BT Connection - Android Device bar code below.

Save

BT Connection - Android Device

On the Android device, the 8680i scanner is shown as a key-

board. Click on it to pair. The Bluetooth symbol appears in the

scanner window when the scanner pairs with a host.

Disconnect from the Host

Once your scanner has been connected to a host, you must dis-

connect it in order to communicate with a different device. Scan

the Bluetooth HID Keyboard Disconnect bar code to unlink the

scanner from the currently linked host.

Tap and Pair

You can pair your Android™ phone with the scanner by touching

the devices together.

1. Touch the Android phone to the scanner.

2. The phone recognizes the scanner and prompts you to pair.

3. Verify the pairing of the scanner in your phone’s Bluetooth

settings.

Pair with a Bluetooth Serial Port - PCs/Laptops

The 8680i scanner can pair with a Bluetooth serial port on a PC

or laptop. Scanning the Non-Base BT Connection bar code

below unlinks your scanner and puts it into a discoverable state.

Once the scanner searches for and connects with a Bluetooth

Bluetooth HID Keyboard Disconnect

Altri manuali per 8680i Series

Indice

Altri manuali Honeywell Lettore di codici a barre

Honeywell

Honeywell Captuvo SL22 Manuale utente

Honeywell

Honeywell OrbitCG MS7180 Manuale utente

Honeywell

Honeywell Eclipse MS5100 Series Manuale utente

Honeywell

Honeywell XENON 1902 Manuale utente

Honeywell

Honeywell Solaris 7980g Manuale utente

Honeywell

Honeywell MX7 Tecton Manuale utente

Honeywell

Honeywell Vuquest 3310g Manuale utente

Honeywell

Honeywell N431X Manuale utente

Honeywell

Honeywell Voyager 1452g Series Manuale utente

Honeywell

Honeywell MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode... Manuale utente

Honeywell

Honeywell Virtuos 1D Manuale utente

Honeywell

Honeywell Captuvo SL22 Manuale utente

Honeywell

Honeywell 4800i Manuale utente

Honeywell

Honeywell HH1800 Manuale utente

Honeywell

Honeywell 3820 Manuale utente

Honeywell

Honeywell 3800r Manuale utente

Honeywell

Honeywell Fusion MS3780 Manuale utente

Honeywell

Honeywell IS4225 ScanGlove Manuale utente

Honeywell

Honeywell XL 800 Series Manuale utente

Honeywell

Honeywell 4600g Manuale utente

Honeywell

Honeywell Fusion MS3780 Manuale utente

Honeywell

Honeywell ms2420 Manuale utente

Honeywell

Honeywell Vuquest 3310g Manuale utente

Honeywell

Honeywell 8650 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente