HP E3473A Manuale utente

A

Dear Customer:

You have probably heard from news reports and from your sales representative that

as of November 1, 1999, four of Hewlett-Packard's businesses became a new

company -- Agilent Technologies. The new company includes the following former

HP businesses: test and measurement, semiconductor products, healthcare

solutions and chemical analysis."

We at Agilent Technologies are working diligently to make this transition as

seamless as possible for you, however, we are not able to make all changes

immediately. As a result, the products and related documentation may be labeled

with either the Hewlett-Packard name and logo or the Agilent Technologies name

and logo. Rest assured that whatever logo you see, the information, products and

services come from the same reliable source.

In addition, it is our sincere intent that the transition from Hewlett Packard to

Agilent Technologies should have no impact on your warranties, service levels, or

purchase volume credits.

For more information about this transition, please visit our website at:

http://www.agilent.com, or contact your local sales representative. It has been our

pleasure to work with you for the past 60 years as part of Hewlett-Packard. We look

forward to continuing to serve you as Agilent Technologies for years to come.

User’s Guide

Publication number E3472-97001

Second edition, March 1997

For Safety information, Warranties, and Regulatory information, see the

pages preceding the table of contents.

HP E3472A/73A Emulator

for SH7040/50

Notice

Hewlett-Packard makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Hewlett-Packard

shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or

use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information, which is protected by

photocopied, reproduced or translated to another language without the prior

written consent of Hewlett-Packard Company. The information contained in

this document is subject to change without notice.

HP is a trademark of Hewlett-Packard Company.

IBM is a trademark of International Business Machines Corporation.

MS-DOSis a U.S. registered trademark of Microsoft Corp.

UNIXis a registered trademark in the United States and other countries,

licensed exclusively through X/Open Company Limited.

Windowsand MS windowsare U.S. registered trademarks of Microsoft

Corp.

Sun is a trademark or a registrered trademark of Sun Microsystems, Inc. in

the United States and other countries.

All the SPARC trademarks are trademarks or registered trademarks in the

United States and other countries, licensed exclusively through SPARC

international, Inc.

Hewlett-Packard

P.O. Box 2197

1900 Garden of the Gods Road

Colorado Springs, CO 80901-2197, U.S.A.

RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by

the U.S. Government is subject to restrictions as set forth in

subparagraph (c) (1)(ii) of the Rights in Technical Data and Computer

Software Clause at DFARS 252.227-7013. Hewlett-Packard Company,

3000 Hannover Street, Palo Alto, CA 94304 U.S.A. Rights for non-DOD

U.S. Government Departments and Agencies are as set forth in FAR

52.227-19(c)(1,2).

Printing History

New editions are complete revisions of the manual. The date on the title

page changes only when a new edition is published.

A software code may be printed before the date; this indicates the version

level of the software product at the time the manual was issued. Many

product updates and fixes do not require manual changes, and manual

corrections may be done without accompanying product changes. Therefore,

do not expect a one-to-one correspondence between product updates and

manual revisions.

Edition 1

E3472-97000, Oct. 1996

Edition 2

E3472-97001, Mar. 1997

iii

Certification

Hewlett-Packard Company certifies that this product met its published

specifications at the time of shipment from the factory. Hewlett-Packard

further certifies that its calibration measurements are traceable to the United

States National Institute of Standards and Technology, to the extent allowed

by the Institution’s calibration facility, or to the calibration facilities of other

International Standards Organization members.

Warranty

This Hewlett-Packard instrument product is warranted against defects in

material and workmanship for a period of one year from the date of shipment,

except that in the case of certain components listed in General Information

of this manual, the warranty shall be for the specified period. During the

warranty period, Hewlett-Packard Company will, at its option, either repair or

replace products that prove to be defective.

For warranty service or repair, this product must be returned to a service

facility designated by HP. Buyer shall prepay shipping charges to HP and HP

shall pay shipping charges to return the product to Buyer. However, Buyer

shall pay all shipping charges, duties, and taxes for products returned to HP

from another country.

HP warrants that its software and firmware designated by HP for use with an

instrument will execute its programming instruction when property installed

on that instrument. HP does not warrant that the operation of the

instrument, or software, or firmware will be uninterrupted or error free.

Limitation Of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by Buyer, Buyer-supplied software or interfacing,

unauthorized modification or misuse, operation outside the environmental

specifications for the product, or improper site preparation or maintenance.

No other warranty is expressed or implied. HP specifically disclaims

the implied warranties of merchantability and fitness for a particular

purpose.

Exclusive Remedies

The remedies provided herein are buyer’s sole and exclusive remedies.

HP shall not be liable for any direct, indirect, special, incidental, or

consequential damages, whether based on contract, tort, or any other

legal theory.

Assistance

Product maintenance agreements and other customer assistance agreements

are available for Hewlett-Packard products.

For any assistance, contact your nearest Hewlett-Packard Sales and Service

Office. Addresses are provided at the back of this manual.

Safety Summary

The following general safety precautions must be observed during all phases

of operation, service, and repair of this instrument. Failure to comply with

these precautions or with specific WARNINGS elsewhere in this manual may

impair the protection provided by the equipment. In addition it violates safety

standards of design, manufacture, and intended use of the instrument.

The Hewlett-Packard Company assumes no liability for the customer’s

failure to comply with these requirements.

Note The HP E3472A/73A complies with INSTALLATION CATEGORY I and

POLLUTION DEGREE 2 in IEC1010-1. The HP E3472A/73A is INDOOR USE

product.

Note LEDs in this product are Class 1 in accordance with IEC825-1.

CLASS 1 LED PRODUCT

Ground The Instrument

To avoid electric shock hazard, the AC/DC adapter must be connected to a

safety earth ground by the supplied power cable with earth blade.

DO NOT Operate in an Explosive Atmosphere

Do not operate the instrument in the presence of flammable gasses or fumes.

Operation of any electrical instrument in such an environment constitutes a

safety hazard.

Keep Away From Live Circuits

Operating personnel must not remove instrument covers. Component

replacement and internal adjustments must be made by qualified

maintenance personnel. Do not replace components with the power cable

connected. Under certain conditions, dangerous voltages may exist even

with the power cable removed. To avoid injuries, always disconnect power

and discharge circuits before touching them.

DO NOT Service or Adjust Alone

Do not attempt internal service or adjustment unless another person, capable

of rendering first aid and resuscitation, is present.

DO NOT Substitute Parts or Modify Instrument

Because of the danger of introducing additional hazards, do not install

substitute parts or perform unauthorized modifications to the instrument.

Return the instrument to a Hewlett-Packard Sales and Service Office for

service and repair to ensure that safety features are maintained.

Dangerous Procedure Warnings

Warnings, such as the example below, precede potentially dangerous

procedures throughout this manual. Instructions contained in the warnings

must be followed.

Warning Dangerous voltages, capable of causing death, are present in this instrument.

Use extreme caution when handling, testing, and adjusting this instrument.

Power Requirements

The HP E3472A/73A requires the following power source:

Voltage : 90 to 132 Vac, 198 to 264 Vac

Frequency : 47 to 63 Hz

Power : 300 VA maximum

Power Cable

In accordance with international safety standards, this instrument is

equipped with a three-wire power cable. When connected to an appropriate

ac power outlet, this cable grounds the instrument frame.

The type of power cable shipped with each instrument depends on the

country of destination. Refer to Figure 1 for the part numbers of the power

cables available.

Warning

For protection from electrical shock, the power cable ground must no be

defeated.

The power plug must be plugged into an outlet that provides a protective

earth ground connection.

vii

Figure 1. Power CordsAvailable for Each Destination

viii

Safety Symbols

General definitions of safety symbols used on equipment or in manuals are

listed below.

Instruction manual symbol: the product is marked with this symbol when it is

necessary for the user to refer to the instruction manual.

Alternating current.

Direct current.

On(Supply).

Off(Supply).

Warning This warning sign denotes a hazard. If calls attention to a procedure,

practice, condition or the like, which, if not correctly performed or adhered

to, could result in injury or death to personnel.

Caution This caution sign denotes a hazard. If calls attention to a procedure,

practice, condition or the like, which, if not correctly performed or adhered

to, could result in damage to or destruction of part or all of the product.

Note This note sign denotes important information. If calls attention to a

procedure, practice, condition or the like, which is essential to highlight.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali HP Hardware per computer

HP HPE LSWM2XGT2PM Manuale utente

HP Metal Jet S100 Manuale utente

HP 5998-1600 Manuale utente

HP QMH2572 8Gb FC HBA Istruzioni utente

HP Model 744 - VME Workstation Manuale utente

HP F768WM Manuale utente

HP A4800A Guida

HP QUERY Manuale utente

HP AF079A Guida all'installazione

HP Smart Array P400 Istruzioni utente

HP StoreOnce 2700 Manuale dell'operatore

HP Xw4600 - Workstation - 2 GB RAM Foglio di istruzioni

HP Kayak XU04 Manuale dell'operatore

HP 381513-B21 - Smart Array P800 Controller... Manuale utente

HP NVIDIA Tesla M2070Q Manuale utente

HP Notebook Series Manuale utente

HP MicroServe Manuale utente

HP JG587A Manuale utente

HP t628 Manuale utente

HP 4440B Manuale utente

HP 64767 Manuale utente

HP 273914-B21 - Smart Array 6404/256 RAID... Manuale utente

HP Adaptive Rack Cooling System Guida utente

HP D7171A - NetServer - LPr Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente