HP Cluster Platform Hardware Kits v2010 Manuale utente
HP DL1000 Cable Management Kit
Installation Guide
HP Part Number: 580771-doc
Published: September 2009
©Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
InfiniBand™ is a trademark of the InfiniBand® Trade Association.
Table of Contents
1 Preparing for Installation................................................................................................6
1.1 Audience...........................................................................................................................................6
1.2 Documentation Resources.................................................................................................................6
1.3 Kit Description..................................................................................................................................6
1.4 Kit Contents.......................................................................................................................................6
1.5 Required Resources...........................................................................................................................7
1.6 Prerequisites......................................................................................................................................8
2 Installing the Cable Management Kit...........................................................................9
2.1 Installing the Cable Management Kit...............................................................................................9
2.2 Securing the InfiniBand Cables.........................................................................................................9
Table of Contents 3
List of Figures
1-1 Bracket Hardware...........................................................................................................................7
2-1 Installing the Cable Management Brackets.....................................................................................9
2-2 Securing an InfiniBand Cable Using a Velcro Strap......................................................................10
4 List of Figures
List of Tables
1-1 Fasteners (Supplied with Cabinet Mounting Hardware)...............................................................7
5
1 Preparing for Installation
1.1 Audience
This guide is intended for HP service representatives and other persons trained to install hardware
options in HP 10000 series racks. Such persons are expected to understand the hazards of working
in this environment and to take suitable precautions to minimize danger to themselves and
others.
1.2 Documentation Resources
You can download the documentation for components referenced in this installation guide from
the following locations:
• HP 10000 Series Rack (Documentation option):
http://h18004.www1.hp.com/products/servers/proliantstorage/racks
• HP Cluster Platform:
http://docs.hp.com/en/highperfcomp.html
1.3 Kit Description
The HP DL1000 series cable management kit described in this manual is designed to align and
support the InfiniBand cables that lead from the server to another InfiniBand switch in the rack
or to an adjacent rack. The kit provides strain relief for the cables connected to the individual
InfiniBand connector ports and ensures a good connection. It also ensures the correct bend radius
for the InfiniBand cable and provides channels for cable routing and cable management. One
cable management kit is required for each HP ProLiant DL4x170h G6 server.
NOTE: The cable management kit is designed to support 24 AWG (0.41 inch) diameter, 26 AWG
(0.37 inch) diameter, and 28 AWG (0.33 inch) diameter InfiniBand cables. Consult the
documentation supplied with your cluster before installing the brackets and routing the cables.
1.4 Kit Contents
Verify that the cable management bracket kit contains the following components:
• Packaging and documentation.
• Four 3.5-inch Velcro straps
• The bracket hardware shown in Figure 1-1.
6 Preparing for Installation
Figure 1-1 Bracket Hardware
• The fasteners that are specified in Table 1-1.
Table 1-1 Fasteners (Supplied with Cabinet Mounting Hardware)
DescriptionTorqueFormatSizeQty.
Cage nut for M6 screwN/ASquare nutM6 cage nuts4
Machine screw25-30
in/lb
PosidriveM6 x 16mm pan
head screws
4
Cage nut for 10-32 screwN/ASquare nut10-32 cage nuts4
Machine screw25-30
in/lb
Posidrive10-32 x 0.625
cap screws
4
To prevent screws from becoming loose because of vibration, HP recommends that you use
an adjustable torque drive, set to the torque specifications given in the table above. Contact
your HP sales representative if any parts are missing.
Note:
This cable management bracket might also be adaptable for other cable management solutions
(consult your hardware installation documentation).
1.5 Required Resources
To install the HP cable management kit, you require the following resources:
• Tools:
— Screwdriver, #2 (medium) Phillips
— Cage-nut insertion tool (shipped with the rack)
— Marker pen or masking tape
• Other resources: InfiniBand cables (not included in this kit)
1.5 Required Resources 7
1.6 Prerequisites
Before you begin to mount the bracket:
•Follow the usual cable-handling precautions for InfiniBand cables, see the HP Cluster Platform
InfiniBand Interconnect Installation and User's Guide.
•Ensure that you know how to plug in the InfiniBand cables, as described in the documentation
that came with your InfiniBand device.
• Obtain the set of cabling tables required for your HP Cluster Platform solution.
8 Preparing for Installation
2 Installing the Cable Management Kit
The location of the cable management kit depends on the rack position occupied by the server
chassis. Align each bracket with the InfiniBand connector ports on the server so that the bracket's
mounting flange is level with the InfiniBand ports.
2.1 Installing the Cable Management Kit
To install the cable management kit, follow these steps:
1. Identify and mark the two holes in the rack's rear mounting rails (callouts 1 and 3 in
Figure 2-1) and clip the 10-32 cage nuts (callout 4 in Figure 2-1) into the square holes.
2. Fasten the top and bottom brackets (callouts 2 and 6 in Figure 2-1) using the four 10-32
screws (callout 5 in Figure 2-1).
Figure 2-1 Installing the Cable Management Brackets
1
2
3
6
4
5
2.2 Securing the InfiniBand Cables
After installing the cable management brackets (callouts 1 and 2 in Figure 2-2) you must install
the Infiniband cables. Once the InfiniBand cables (callout 3 in Figure 2-2) are installed, you can
secure them to the cable management brackets using the 3.5-inch Velcro straps (see detailed view
in Figure 2-2).
2.1 Installing the Cable Management Kit 9
Figure 2-2 Securing an InfiniBand Cable Using a Velcro Strap
1
2
3
Properly installed, this cable management kit provides the necessary strain relief for the InfiniBand
connections and maintains a minimum 4-inch bend radius for the InfiniBand cables.
10 Installing the Cable Management Kit
Altri manuali per Cluster Platform Hardware Kits v2010
8
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali HP Server
HP
HP cc2300 Manuale del proprietario
HP
HP Rp3440-4 - 9000 - 0 MB RAM Manuale del proprietario
HP
HP HPE ProLiant DL365 Gen10 Plus Server Manuale
HP
HP LC2000r - NetServer - 128 MB RAM Manuale utente
HP
HP ProCurve 1600M Istruzioni per l'installazione
HP
HP ProLiant DL388e Manuale utente
HP
HP 9000 rp7420 Manuale utente
HP
HP PA-8600 Guida all'installazione
HP
HP ProLiant ML350e Gen8 Manuale
HP
HP ProLiant DL280 Manuale
HP
HP ProLiant ML310e Gen Manuale
HP
HP D7171A - NetServer - LPr Manuale utente
HP
HP ProLiant DL360 G9 Istruzioni di montaggio
HP
HP Rp3440-4 - 9000 - 0 MB RAM Manuale utente
HP
HP ProLiant DL360 Gen10 Manuale utente
HP
HP ProLiant DL385 G7 Manuale
HP
HP ProLiant DL180 G Manuale
HP
HP ProLiant DL740 Istruzioni utente
HP
HP ProLiant DL320e Manuale utente
HP
HP ProLiant XL220a Gen8 v2 Manuale utente
