HPE Aruba 3810M Istruzioni per il montaggio
MF877-00 Page 1
Template Revision A
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
JL074A Aruba 3810M 48G PoE+ 1-slot Swch
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
4
Batteries
All types including standard alkaline and lithium
coin or button style batteries
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
1
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
MF877-00 Page 2
Template Revision A
HPE instructions for this template are available at MF877-01
Item Description Notes
Quantity
of items
included
in product
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx Screw Drivers
T-10
Phillips Screw Driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. 1. See 3.2 for pictorial disassembly instruction. Please open the attachment and print out if needed.
2.
3.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
JL074A Disassembly
Instruction.pptx
Find Steps Description Quantity
1Remove Mac address label 1
2Un-install Chassis serial number label 1
3Un-install PS Blank Filler 1
4Unscrew and un-install Assy,Fan Module, 3810 Switch 1
5Unscrew and un-install Assy, Module blank module 1
6Unscrew and remove SCREW-MACHINE ASSEMBLY M5 X 0.8 10M ROHS 2
7Unscrew and remove SCREW-THD-RLG M3 X 0.5 6MM-LG ROHS 2
1
2
3
4
5
6
Screws must tighten
7
PG : 1
REV: 01
aFollow Sequence.
b a c
n
3
klm
h
j
g i
r
opq
21
e d f
Find Steps Description Quantity
1Remove Bar Code Label, JL076A 1
2Un-screw SCREW-THD-RLG M3 X 0.5 18
3Remove Assy, Chassis Cover 3810 POE Switch 1
PG : 2
REV: 01
PG : 3
REV: 01
Find Steps Description Quantity
1Un-install COVER, RJ45 CONNECTOR 3810 Switch 1
2Unscrew SCREW-MACHINE M3X0.5 6M 6
3Un-install Assy, CPU Module w Mech (Wolfgang CPU) 1Screws must tighten
aFollow Sequence.
3
2
1
PG : 4
REV: 01
7
8
5
Cut and remove the Cable Tie
2
Connect ThisConnect ThisConnect ThisDisconnect
64
3
Find Steps Description Quantity
1Unscrew Stdoff Hex Female Stdoff M3-0.5x28mm CS Wz 1
2Cut CABLE TIE .062-1.25-DIA .1-WD NYL ROHS 1
3Disconnect form the 3 x PCA Wire Harness, 3810 Usability 1
4Unscrew Unscrew 2
5Un-install PCA, Usability_Management 1
6Unscrew Screw FH, M3x0.5mm, 6mmL, machine 2
7Uninstall PCA, Usability board (Spectre)1
8Uninstall Pushbutton, SMT, Mode Switch 1
8
PG : 5
REV: 01
Find Steps Description Quantity
1remove HP 3810 48G Composite Label 1
2Unscrew and Uninstall Assy, Bulkhead Blank FP 1
3Unscrew SCREW-TAPPING M3 X 0.5 18
4Un-install Assy, 48x1G PoE + Fry12 w Mech 1
5Remove INSULATOR, CHASSIS BASE 3810 SWITCH 1
6Remove Lbl, Regulatory JL074A 1
5
6
JL074A
2
16.0 lb/in
a
c
bd
f
e i h
g
l
j
k m
n
3
4
Questo manuale è adatto per i seguenti modelli
1
Altri manuali HPE Interruttore
HPE
HPE JL324A Istruzioni per il montaggio
HPE
HPE FlexNetwork 10500 SERIES Manuale utente
HPE
HPE FlexFabric 7900 Series Manuale utente
HPE
HPE FlexNetwork 10500 SERIES Manuale utente
HPE
HPE H3C S9500 Series Manuale utente
HPE
HPE FlexNetwork 10500 SERIES Manuale di installazione
HPE
HPE FlexFabric 5710 Series Manuale di istruzioni
HPE
HPE LSQM2MPUD0 Manuale utente
HPE
HPE FlexNetwork 5130 HI SERIES Manuale utente
HPE
HPE FlexFabric 12900E Manuale utente
HPE
HPE FlexNetwork 7500 Switch Manuale utente
HPE
HPE FlexNetwork 5510 HI Series Manuale utente
HPE
HPE 1410-16G Manuale utente
HPE
HPE SN6000B Manuale operativo e di manutenzione
HPE
HPE Aruba 6200F Istruzioni per il montaggio
HPE
HPE Aruba 3810M Istruzioni per il montaggio
HPE
HPE Altoline 9960 LC1 Istruzioni per il montaggio
HPE
HPE 6125XLG Istruzioni utente
HPE
HPE OfficeConnect 1910 Series Guida di sicurezza
HPE
HPE StoreFabric SN3600B Manuale utente
