Huawei OptiXstar S890H Manuale utente

Huawei OptiXstar S890H

Quick Start

Issue 02

Date 2022-12-01

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://www.huawei.com

Email: [email protected]

Contents

1 Device Appearance.................................................................................................................. 1

2 Installing the Device............................................................................................................... 3

3 Cable Connections................................................................................................................... 7

4 Indicator Description.............................................................................................................. 9

5 Technical Specications....................................................................................................... 10

6 FAQs..........................................................................................................................................11

Huawei OptiXstar S890H

Quick Start Contents

1 Device Appearance

Huawei OptiXstar S890H is an XGS-PON mini ONU that supports XGS-PON

upstream access and provides one 10GE Ethernet port on the user side. There are

heat dissipation holes on the four sides of the device.

Figure 1-1 Device appearance (XGE port side)

Huawei OptiXstar S890H

Quick Start 1 Device Appearance

Figure 1-2 Device appearance (PON port side)

NO TE

The gures shown in this document may dier from the actual products, but the

dierences do not aect the functions of the products.

Huawei OptiXstar S890H

Quick Start 1 Device Appearance

2 Installing the Device

The S890H should be installed near indoor Wi-Fi 6 APs based on cable routes.

WARNING

● The S890H must be installed in an area with restricted access, for example, on

a ceiling buckle tile or at least 2.5 m above a oor. Only professional personnel

are allowed to operate and maintain the S890H.

● Before the installation, take ESD protection measures, for example, wear ESD

gloves or an ESD wrist strap.

● When inserting or removing a ber, do not look into the optical port without

eye protection.

● When inserting a ber, ensure that the end face of the ber is clean.

Installation Preparations

The S890H must be used with the Huawei OptiXaccess S1016 power module and

indoor Wi-Fi 6 AP. Before installation, ensure that the Huawei OptiXaccess S1016

power module, indoor Wi-Fi 6 AP, photoelectric composite cable, network cable,

and related installation tools are available.

Huawei OptiXstar S890H

Quick Start 2 Installing the Device

NO TE

● Before installing the device, ensure that the following tools are available: ESD wrist

strap, ESD gloves, and ESD bag. For details about the tools required for installing an AP,

see the AP installation guide.

● If an optical port is exposed to air for a long time, the performance of the device

deteriorates. Therefore, connect a ber to the optical port within 20 minutes after

removing the dustproof cap.

● The optical port of the S890H supports SC/UPC connectors.

● The S890H needs to work with the remote S1016 power module and Wi-Fi 6 AP. When

one end of the S890H is connected to a photoelectric composite cable, the S890H is not

running by default. The S890H can be started only after the XGE port is connected to a

network cable and the other end of the network cable is connected to an AP. For details

about the running status of the S890H, see the Indicator Description.

Determining the Installation Position

When connecting a cable to an indoor AP, install the S890H near the AP. The

S890H should be installed on a ceiling buckle tile or at least 2.5 m above the oor,

and should be at least 10 cm away from the AP edge and side wall. Do not install

it directly above an AP.

Installing the S890H

Step 1 When installing an indoor AP, secure the sheet metal mounting bracket, drill holes

near the mounting bracket, and route cables.

Huawei OptiXstar S890H

Quick Start 2 Installing the Device

NO TE

● The preceding gure is for reference only.

● For details about how to install an indoor AP, scan the QR code on the nameplate of the

AP to obtain the installation documentation.

● Indoor APs are usually installed in a ceiling or against a wall by using sheet metal

mounting brackets. The following describes how to install the S890H on the ceiling.

● If an AP is installed against a wall, you route a cable and place the S890H in the ceiling

to avoid hanging the device.

Step 2 Remove the dustproof cap from the optical port on the S890H, connect the pre-

deployed photoelectric composite cable to the optical port on the S890H, and

connect a network cable to the XGE port on the S890H.

CA UTION

● Photoelectric composite cables must be routed through metal pipes or buried in

a wall.

● During the construction, strictly follow the construction requirements of the

photoelectric composite cable.

● If the optical port of the device is exposed to the air for a long time, the

product performance deteriorates. Therefore, connect a ber within 20 minutes

after removing the dustproof cap.

Step 3 Route the connected S890H through the cable hole, place it in the ceiling, and

push it inwards away from the position directly above the AP along the cable

route until it is at least 10 cm away from the AP edge and side wall.

Huawei OptiXstar S890H

Quick Start 2 Installing the Device

Step 4 Connect the network cable to the corresponding port on the AP, route the AP

cable, and then secure the AP to the mounting bracket to nish the installation.

----End

Huawei OptiXstar S890H

Quick Start 2 Installing the Device

3 Cable Connections

NO TE

The S890H can work only with the Huawei OptiXaccess S1016 power module and Huawei

indoor Wi-Fi 6 AP.

Figure 3-1 Network side

Figure 3-2 User side

Huawei OptiXstar S890H

Quick Start 3 Cable Connections

Indice

Altri manuali Huawei Hardware di rete

Huawei

Huawei ME60 Series Guida

Huawei

Huawei OptiXstar EN8245X6s-8N Manuale utente

Huawei

Huawei IDS2000 Dual-Row Aisle Containment Manuale utente

Huawei

Huawei OptiXstar P603E Manuale utente

Huawei

Huawei BYPASS OP9000 Manuale utente

Huawei

Huawei ME01-MSUA Manuale utente

Huawei

Huawei BBU3900 V300 Manuale utente

Huawei

Huawei CR52-SRUA Manuale utente

Huawei

Huawei EchoLife HG8247H Manuale dell'operatore

Huawei

Huawei RTN510 Manuale utente

Huawei

Huawei MA5200F-2000 Manuale utente

Huawei

Huawei TP48200A-HT19C4-1 Manuale utente

Huawei

Huawei BBU3900 Manuale utente

Huawei

Huawei CX600-X1-M Series Guida

Huawei

Huawei CR52-MPUA Manuale utente

Huawei

Huawei OptiXstar EG8245X6-8N Manuale utente

Huawei

Huawei ETP4860-B1A2 Manuale utente

Huawei

Huawei RRU3201 Manuale utente

Huawei

Huawei RT-FIC-16ASE Manuale utente

Huawei

Huawei FusionModule2000-S Manuale utente

Huawei

Huawei Telecom Power TP48120A-HD15A1 Manuale utente

Huawei

Huawei FusionDC1000A Specifiche tecniche

Huawei

Huawei CR52-SFUD Manuale utente

Huawei

Huawei CR52K-4xPOS/STM16-SFP Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente